iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 62053-23:2004/A1:2017/AC:2018

(Corrigendum)

Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3)

Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3)

IEC corrected version

Wechselstrom-Elektrizitätszähler - Besondere Anforderungen - Teil 23: Elektronische Blindverbrauchszähler der Genauigkeitsklassen 2 und 3

Équipement de comptage de l'électricité (c.a.) - Prescriptions particulières - Partie 23 : compteurs statiques d'énergie réactive (classes 2 et 3)

Oprema za merjenje električne energije (izmenični tok) - Posebne zahteve - 23. del: Statični števci jalove energije (razreda 2 in 3) - Dopolnilo A1 - Popravek AC

General Information

Status
Withdrawn
Publication Date
12-Sep-2018
Withdrawal Date
17-Apr-2024
ICS
17.220.20 - Measurement of electrical and magnetic quantities
91.140.50 - Electricity supply systems
Technical Committee
MEE - Equipment for electrical energy measurement and load control
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
17-Apr-2024
Due Date
10-May-2024
Completion Date
18-Apr-2024
Directive
2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
TP010 - Pravilnik o meroslovnih zahtevah za statične števce jalove električne energije točnostnih razredov 2 in 3
Mandate
M/441 - Standardisation mandate to CEN, CENELEC and ETSI in the field of measuring instruments for the development of an open architecture for utility meters involving communication protocols enabling interoperability
Ref Project
EN 62053-23:2003/A1:2017/AC:2018-05 - Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3)

Relations

Replaced By
SIST EN IEC 62053-23:2021 - Electricity metering equipment - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3)
Effective Date
07-Jun-2022
Replaced By
SIST EN IEC 62053-23:2021 - Electricity metering equipment - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3)
Effective Date
01-Jun-2021
Corrects
SIST EN 62053-23:2004/A1:2017 - Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3)
Effective Date
07-Jun-2022
Corrects
SIST EN 62053-23:2004/A1:2017 - Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3)
Effective Date
01-Oct-2018

Buy Standard

EN 62053-23:2004/A1:2017/AC:2018EN 62053-23:2004/A1:2017/AC:2018
PreviousNext
Corrigendum
EN 62053-23:2004/A1:2017/AC:2018
English and French language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Wechselstrom-Elektrizitätszähler - Besondere Anforderungen - Teil 23: Elektronische Blindverbrauchszähler der Genauigkeitsklassen 2 und 3Équipement de comptage de l'électricité (c.a.) - Prescriptions particulières - Partie 23 : compteurs statiques d'énergie réactive (classes 2 et 3)Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3)91.140.50Sistemi za oskrbo z elektrikoElectricity supply systems17.220.20Measurement of electrical and magnetic quantitiesICS:Ta slovenski standard je istoveten z:EN 62053-23:2003/A1:2017/AC:2018-05SIST EN 62053-23:2004/A1:2017/AC:2018en,fr01-oktober-2018SIST EN 62053-23:2004/A1:2017/AC:2018SLOVENSKI
STANDARD



SIST EN 62053-23:2004/A1:2017/AC:2018



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 62053-23:2003/A1:2017/ AC:2018-05
May 2018
ICS 17.220.20
English Version
Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3) (IEC 62053-23:2003/A1:2016/COR1:2018)
Équipement de comptage de l'électricité (c.a.) - Prescriptions particulières - Partie 23 : compteurs statiques d'énergie réactive (classes 2 et 3) (IEC 62053-23:2003/A1:2016/COR1:2018)
Wechselstrom-Elektrizitätszähler - Besondere Anforderungen - Teil 23: Elektronische Blindverbrauchszähler der Genauigkeitsklassen 2 und 3 (IEC 62053-23:2003/A1:2016/COR1:2018) This corrigendum becomes effective on 4 May 2018 for incorporation in the English language version of the EN. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23,
B-1040 Brussels © 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62053-23:2003/A1:2017/AC:2018-05 E SIST EN 62053-23:2004/A1:2017/AC:2018



EN 62053-23:200
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 62052-11:2021/A12:2024(Amendment)
Electricity metering equipment - General requirements, tests and test conditions - Part 11: Metering equipment
EN IEC 62052-11:2021/A12:2024
  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62056-6-1:2024(Main)
Electricity metering data exchange - The DLMS/COSEM suite - Part 6-1: Object Identification System (OBIS) (IEC 62056-6-1:2023)
EN IEC 62056-6-1:2024

This part of IEC 62056 specifies the overall structure of the OBject Identification System (OBIS)
and the mapping of all commonly used data items in metering equipment to their identification
codes.
OBIS provides a unique identifier for all data within the metering equipment, including not only
measurement values, but also abstract values used for configuration or obtaining information
about the behaviour of the metering equipment. The ID codes defined in this document are used
for the identification of:
• logical names of the various instances of the ICs, or objects, as defined in
IEC 62056‑6‑2:2023;
• data transmitted through communication lines;
• data displayed on the metering equipment, see Clause A.2 in Annex A.
This document applies to all types of metering equipment, such as fully integrated meters,
modular meters, tariff attachments, data concentrators, etc.
To cover metering equipment measuring energy types other than electricity, combined metering
equipment measuring more than one type of energy or metering equipment with several physical
measurement channels, the concepts of medium and channels are introduced. This allows
meter data originating from different sources to be identified. While this document fully defines
the structure of the identification system for other media, the mapping of non-electrical energy
related data items to ID codes is completed separately.
NOTE EN 13757-1:2014 defines identifiers for metering equipment other than electricity: heat cost allocators,
thermal energy, gas, cold water and hot water.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62056-5-3:2024(Main)
Electrcity metering data exchange - The DLMS/COSEM suite - Part 5-3: DLMS/COSEM application layer (IEC 62056-5-3:2023)
EN IEC 62056-5-3:2023

This part of IEC 62056 specifies the DLMS®/COSEM application layer in terms of structure, services and protocols for DLMS®/COSEM clients and servers, and defines rules to specify the DLMS®/COSEM communication profiles.
It defines services for establishing and releasing application associations, and data communication services for accessing the methods and attributes of COSEM interface objects, defined in IEC 62056-6-2:2021 using either logical name (LN) or short name (SN) referencing.
Annex A (normative) defines how to use the COSEM application layer in various communication profiles. It specifies how various communication profiles can be constructed for exchanging data with metering equipment using the COSEM interface model, and what are the necessary elements to specify in each communication profile. The actual, media-specific communication profiles are specified in separate parts of the IEC 62056 series.
Annex B (normative) specifies the SMS short wrapper.
Annex C (normative) specifies the gateway protocol.
Annex D, Annex E and Annex F (informative) include encoding examples for APDUs.
Annex G (normative) provides NSA Suite B elliptic curves and domain parameters.
Annex H (informative) provides an example of an End entity signature certificate using P-256 signed with P-256.
Annex I (normative) specifies the use of key agreement schemes in DLMS®/COSEM.
Annex J (informative) provides examples of exchanging protected xDLMS APDUs between a third party and a server.
Annex K (informative) lists the main technical changes in this edition of the standard.

  • Standard
    380 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62056-8-12:2024(Main)
Electricity metering data exchange - The DLMS/COSEM suite - Part 8-12: Communication profile for Low Power Wide Area Networks (LPWAN) (IEC 62056-8-12:2023)
EN IEC 62056-8-12:2023

IEC 62056-8-12:2023 describes the use of DLMS®/COSEM for Low-Power Wide Area Networks (LPWANs). It specifies how the COSEM data model and the DLMS®/COSEM application layer can be used over various LPWAN technologies using an adaptation layer based on IETF RFC 8724, and in particular over LoRaWAN.
This profile is intended to be used with LPWANs as defined in IETF RFC 8724, in particular LoRaWAN. Low-Power Wide Area Networks (LPWANs) are wireless technologies with characteristics such as large coverage areas, low bandwidth, possibly very small packet and application-layer data sizes, and long battery life operation. This document does not provide functionality to manage the lower layers of the LPWANs.
This part of the DLMS®/COSEM suite specifies the communication profile for Low-Power Wide Area Networks (LPWANs).
The DLMS®/COSEM LPWAN communication profiles use connection-less transport layer based on the Internet Standard User Datagram Protocol (UDP) and Internet Protocol (IPv6).
The adaptation layer is based on IETF RFC 8724 which provides both a header compression/decompression mechanism and an optional fragmentation/reassembly mechanism. SCHC compression is based on static context with small context identifier to represent full IPv6/UDP/COSEM wrapper headers. If required, SCHC fragmentation is used to support IPv6 MTU over the LPWAN technologies.
This document follows the rules defined in IEC 62056-5-3:2023, Annex A, and in IEC 62056-1-0, and IEC TS 62056-1-1:2016 for its structure. See also Annex A for examples

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62056-6-2:2024(Main)
Electricity metering data exchange - The DLMS/COSEM suite - Part 6-2: COSEM interface classes (IEC 62056-6-2:2023)
EN IEC 62056-6-2:2023

This part of IEC 62056 specifies a model of a meter as it is seen through its communication interface(s). Generic building blocks are defined using object-oriented methods, in the form of interface classes to model meters from simple up to very complex functionality.
Annexes A to F (informative) provide additional information related to some interface classes.

  • Standard
    533 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50470-4:2023(Main)
Electricity metering equipment - Part 4: Particular requirements - Static meters for DC active energy (class indexes A, B, C)
EN 50470-4:2023

This document applies only to static watt-hour meters of accuracy classes A, B and C for the measurement of direct current electrical active energy in DC systems and it applies to their type tests.
NOTE 1   For general requirements, such as construction, EMC, safety, dependability etc., see the relevant EN 62052 series or EN 62059 series.
This document applies to electricity metering equipment designed to:
-   measure and control electrical energy on DC electrical networks with voltages up to 1 500 V;
NOTE 2   Meters for unearthed DC supplies and meters for three-wire DC networks are within the scope of this document.
-   form a complete meter including the legally relevant display of measured values;
NOTE 3   Modular meters as described in WELMEC guide 11.7 are included.
-   operate with integrated or detached legally relevant displays;
-   optionally, provide additional functions other than those for measurement of electrical energy.
They can be used for measuring DC electrical energy, amongst others, in the following application areas:
-   in EV (electrical vehicle) charging stations or in EV charging infrastructure (also called EVSE, electric vehicle supply equipment), if energy is measured on the DC side;
-   in solar PV (photovoltaic) systems where DC power generation is measured;
-   in low voltage DC networks for residential or commercial areas, if energy is measured on the DC side, including similar applications like information technology (IT) server farms or DC supply points for communication equipment;
-   in DC supply points for public transport networks (e.g., for trolleybuses);
-   in mobile applications on vehicles for e-road (electric road) systems.
Meters designed for operation with external DC instrument transformers or transducers can be tested for compliance with this document only if such meters and their transformers or transducers are tested together and meet the requirements for directly connected meters. Requirements in this document and in EN IEC 62052-11:2021/A11:2022 applying to meters designed for operation with DC LPITs also apply to meters designed for operation with external instrument transformers or transducers.
NOTE 4   Modern electricity meters typically contain additional functions such as measurement of voltage magnitude, current magnitude, power, etc.; measurement of power quality parameters; load control functions; delivery, time, test, accounting, recording functions; data communication interfaces and associated data security functions. The relevant standards for these functions could apply in addition to the requirements of this document. However, the requirements for such functions are outside the scope of this document.
NOTE 5   Product requirements for power metering and monitoring devices (PMDs) and measurement functions such as voltage magnitude, current magnitude, power, etc., are covered in EN IEC 61557 12:2022. However, devices compliant with EN IEC 61557 12:2022 are not intended to be used as billing meters unless they are also compliant with EN IEC 62052-11:2021/A11:2022 and this document.
NOTE 6   Requirements for DC power quality (PQ) instruments, DC PQ measuring techniques, and DC PQ instrument testing are under discussion and will be specified in other standards.
[...]

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62057-1:2023(Main)
Electrical energy meters - Test equipment, techniques and procedures - Part 1: Stationary meter test units (MTUs) (IEC 62057-1:2023)
EN IEC 62057-1:2023

IEC 62057-1:2023 applies to stationary meter test units (MTUs) permanently installed in laboratories, used for testing and calibration of electricity meters, in particular for their type test, acceptance test and verification test. It covers the requirements for automatic MTUs for indoor laboratory application and applies to newly manufactured MTUs to test electricity meters on 50 Hz or 60 Hz networks with an AC voltage up to 600 V (phase to neutral).
If meters are intended for system voltages not specified in this document, special requirements are agreed between the manufacturer and the purchaser.
This document also defines the kind of tests to perform as type tests / routine tests / acceptance tests and commissioning tests for MTUs.
It does not apply to:
• portable reference meters and portable sources;
• electricity meters;
• data interfaces to the meter and test procedures of data interface;
• transformer operated MTUs;
• personal computers supplied together with the MTU.

  • Standard
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62052-41:2023(Main)
Electricity metering equipment - General requirements, tests and test conditions - Part 41: Energy registration methods and requirements for multi-energy and multi-rate meters (IEC 62052-41:2022)
EN IEC 62052-41:2022

IEC 62052-41:2022 applies only to newly manufactured multi-energy and/or multi-rate static meters and it applies to their type tests only.
This document applies to electricity metering equipment designed to:
• measure and control electrical energy on networks with voltage up to 1 000 V AC, or 1 500 V DC;
• have all functional elements, including add-on modules, enclosed in, or forming a single meter case with exception of indicating displays;
• operate with integrated displays;
• operate with detached indicating displays, or without an indicating display;
• be installed in a specified matching socket or rack;
• optionally, provide additional functions other than those for measurement of electrical energy.
Meters designed for operation with Low Power Instrument Transformers (LPITs as defined in the IEC 61869 series) may be tested for compliance with this document and the relevant IEC 62053 series documents only if such meters and their LPITs are tested together as directly connected meters.
This document does not apply to:
• meters for which the voltage line-to-neutral derived from nominal voltages exceeds 1 000 V AC, or 1 500 V DC;
• meters intended for connection with low power instrument transformers (LPITs as defined in the IEC 61869 series of standards) when tested without such transformers;
• metering systems comprising multiple devices (except for LPITs) physically remote from one another;
• portable meters;
• meters used in rolling stock, vehicles, ships and airplanes;
• laboratory and meter test equipment;
• reference standard meters;
• data interfaces to the register of the meter;
• matching sockets or racks used for installation of electricity metering equipment.
This document does not cover measures for the detection and prevention of fraudulent attempts to compromise a meter’s performance (tampering).

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62055-42:2022(Main)
Electricity metering - Payment systems - Part 42: Transaction Reference Numbers (TRN)
EN IEC 62055-42:2022

This document specifies a token generation mechanism and token structure for smart
prepayment functionality in markets where IEC 62055-41 compliant systems are not used, and
where a different security mechanism is required by project-specific or national requirements.
This document specifies token structure, authentication and an anti-replay mechanism, token
operating model, and protocol.
This document is informed by the STS Association key management services, and by the key
management mechanisms used within the DLMS/COSEM security model within IEC 62056‑6‑2.
Reference is made to the international STS token standards (IEC 62055-41, IEC 62055-51 and
IEC 62055-52) for payment metering systems, and interworking has been considered where
appropriate in terms of token carrier ranges in the decimal domain. IEC 62055-41 tokens and
those described in this document are not interoperable, however their domains are designed to
be mutually exclusive to ensure the two kinds of tokens do not interfere with each other.
Metering application processing and functionality, HAN interface commands and attributes,
WAN interface commands and attributes are outside the scope of this document; however,
reference is made to other standards in this regard.
The mechanism for auditing and retrieving data from the meter relating to tariffication, meter
readings, profile data and other legal metrology information is outside the scope of this
document; however, this is defined as part of any overall metering solution. Such interfaces for
retrieving data from a meter may be defined using suitable protocols such as DLMS/COSEM as
defined in the IEC 62056 series.

  • Standard
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62055-31:2022(Main)
Electricity metering - Payment systems - Part 31: Particular requirements - Static payment meters for active energy (classes 0,5, 1 and 2)
EN IEC 62055-31:2022

This part of IEC 62055 applies to newly manufactured, static watt-hour payment meters of
accuracy classes 0,5, 1 and 2 for direct connection, for the measurement of alternating current
electrical energy consumption of a frequency in the range 45 Hz to 65 Hz that include a supply
control switch for the purpose of interruption or restoration of the electricity supply to the load
in accordance with the current value of the available credit maintained in the payment meter. It
does not apply to static watt-hour payment meters where the voltage across the connection
terminals exceeds 1 000 V (line-to-line voltage for meters for polyphase systems).
It applies to payment meters for indoor application, operating under normal climatic conditions
where the payment meter is mounted as for normal service (i.e. together with a specified
matching socket where applicable).
Payment meters are implementations where all the main functional elements are incorporated
in a single enclosure, together with any specified matching socket. There are also multi-device
payment metering installations where the various main functional elements, such as the
measuring element, the user interface unit, token carrier interface, and the supply control switch
are implemented in more than one enclosure, involving additional interfaces.
Functional requirements that apply to payment meters are also defined in this document, and
include informative basic functional requirements and tests for the prepayment mode of
operation in Annex A. Allowances are made for the relatively wide range of features, options,
alternatives, and implementations that may be found in practice. The diverse nature and
functionality of payment meters prevent the comprehensive specification of detailed test
methods for all of these requirements. However, in this case, the requirements are stated in
such a way that tests can then be formulated to respect and validate the specific functionality
of the payment meter being tested.
This document does not cover specific functionality or performance requirements for circuit
protection, isolation or similar purposes that may be specified through reference to other
specifications or standards. Safety requirements removed from Edition 1.0 have been replaced
with references to the safety requirements now contained in IEC 62052-31:2015, the product
safety standard for newly manufactured electricity meters. In-service safety testing (ISST) is
not covered by IEC 62052-31:2015 and is left to national best practice usually as an extension
of existing in-service testing (IST) of metrology stability.
This document does not cover software requirements. This document covers type-testing
requirements only. For acceptance testing, the requirements given in IEC 62058‑11:2008 and
IEC 62058-31:2008 may be used.
Dependability aspects are addressed in the IEC 62059 series of standards. Additional reliability,
availability, maintenance and life cycle aspects are provided by IEC TC 56.
This document does not cover conformity tests and system compliance tests that may be
required in connection with legal or other requirements of some markets

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day