iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 408:1996

(Main)

Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties

Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties

This standard specifies test methods for determining the following properties of structural timber and glued laminated timber: modulus of elasticity in bending; shear modulus; bending strength; modulus of elasticity in tension parallel to the grain; tension strength parallel to the grain; modulus of elasticity in compression parallel to the grain; compression strength parallel to the grain. In addition, the determination of dimensions, moisture content, and density are specified.

Holzbauwerke - Bauholz für tragende Zwecke und Brettschichtholz - Bestimmung einiger physikalischer und mechanischer Eigenschaften

Diese Norm beschreibt Prüfverfahren zur Bestimmung folgender Eigenschaften von Bauholz für tragende Zwecke und Brettschichtholz: Biege-Elastizitätsmodul;  Schubmodul; Biegefestigkeit; Zug-Elastizitätsmodul in Faserrichtung; Zugfestigkeit in Faserrichtung; Druck-Elastizitätsmodul in Faserrichtung; Druckfestigkeit in Faserrichtung. Zusätzlich wird die Bestimmung der Masse, der Holzfeuchte und der Rohdichte festgelegt.

Structures en bois - Bois massif et bois lamellé collé - Détermination de certaines propriétés physiques et mécaniques

La présente norme spécifie des méthodes de détermination des propriétés suivantes du bois massif et du bois lamellé-collé: module d'élasticité en flexion; module de cisaillement; résistance a la flexion; module d'élasticité en traction parallele aux fibres; résistance a la traction parallele aux fibres;  module d'élasticité en compression parallele aux fibres; résistance a la compression paralllele aux fibres. La détermination des dimensions, de l'humidité et de la masse volumique est également spécifiée.

Lesene konstrukcije - Konstrukcijski les in lepljen lameliran les - Ugotavljanje nekaterih fizikalnih in mehanskih lastnosti

General Information

Status
Withdrawn
Publication Date
31-Jul-1996
Withdrawal Date
31-Dec-2003
ICS
79.040 - Wood, sawlogs and sawn timber
91.080.20 - Timber structures
Technical Committee
KON - Structures
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Jan-2004
Due Date
01-Jan-2004
Completion Date
01-Jan-2004
Directive
89/106/EEC - Construction products
Mandate
M/BC/CEN/87/10 - Standardization request in the field of Construction products - timber
Ref Project
EN 408:1995 - Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties

Relations

Replaced By
SIST EN 408:2004 - Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties
Effective Date
01-Jan-2004

Buy Standard

EN 408:1996EN 408:1996
PreviousNext
Standard
EN 408:1996
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 408:1996
01-avgust-1996
Lesene konstrukcije - Konstrukcijski les in lepljen lameliran les - Ugotavljanje
nekaterih fizikalnih in mehanskih lastnosti
Timber structures - Structural timber and glued laminated timber - Determination of some
physical and mechanical properties
Holzbauwerke - Bauholz für tragende Zwecke und Brettschichtholz - Bestimmung einiger
physikalischer und mechanischer Eigenschaften
Structures en bois - Bois massif et bois lamellé collé - Détermination de certaines
propriétés physiques et mécaniques
Ta slovenski standard je istoveten z: EN 408:1995
ICS:
79.040 Les, hlodovina in žagan les Wood, sawlogs and sawn
timber
91.080.20 Lesene konstrukcije Timber structures
SIST EN 408:1996 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 408:1996

---------------------- Page: 2 ----------------------

SIST EN 408:1996

---------------------- Page: 3 ----------------------

SIST EN 408:1996

---------------------- Page: 4 ----------------------

SIST EN 408:1996

---------------------- Page: 5 ----------------------

SIST EN 408
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 14251:2004(Main)
Structural round timber - Test methods
EN 14251:2003

This standard applies for structural round wood timber other than specified in EN 12509.
This test standard specifies test methods for determining the following properties of structural round timber; the bending strength, modulus of elasticity in bending; the compressive strength parallel to the grain and modulus of elasticity in compression parallel to the grain.
In addition, the determination of dimensions, moisture content and density is specified. The methods apply to debarked round timber.
This standard is not intended for quality-control test purposes.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 14544:2006
Timber structures - Strength graded structural timber with round cross-section - Requirements
prEN 14544

This European Standard lays down the requirements for visual graded structural timber with round cross-sections, barked of unbarked and cut on length but otherwise not machined.
This standard specifies tolerances on sizes and identifies the characteristics for which, as a minimum, limits shall be given in visual grading rules. It also proposes two grades recommended where no national grades exist.
Structural timber treated against fire or biological attack is not covered in this standard.

  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14081-4:2005/kprA4:2008(Amendment)
Timber structures - Strength graded structural timber with rectangular cross section - Part 4: Machine grading - Grading machine settings for machine controlled systems
EN 14081-4:2005/prA4

Fourth amendment of new machine settings

  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14081-4:2005+A2:2007/oprA3:2007(Amendment)
Timber structures - Strength graded structural timber with rectangular cross section - Part 4: Machine grading - Grading machine settings for machine controlled systems
EN 14081-4:2005+A2:2007/prA3
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14081-2:2018+A1:2022(Main)
Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading; additional requirements for type testing
EN 14081-2:2018+A1:2022

This document specifies requirements, additional to those of EN 14081-1, for type testing of machine graded structural timber with rectangular cross-sections shaped by sawing, planning or other methods, and having deviations from the target sizes corresponding to EN 336. This includes requirements for strength grading machines.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 384:2016+A2:2022(Main)
Structural timber - Determination of characteristic values of mechanical properties and density
EN 384:2016+A2:2022

This European Standard gives a method for determining characteristic values of mechanical properties and density, for defined populations of visual grades and/or strength classes of machine graded structural timber. Additionally it covers the stages of sampling, testing, analysis and presentation of the data.
The standard provides methods to derive strength, stiffness and density properties for structural timber from tests with defect-free specimen.
The values determined in accordance with this standard for mechanical properties and density are suitable for assigning grades and species to the strength classes of EN 338.
NOTE 1   For assigning grades and species to the strength classes in EN 338 only three properties, i.e. bending or tension strength, modulus of elasticity parallel to grain in bending or tension and density need to be determined from test data, other properties can be calculated according to Table 2.
NOTE 2   EN 1912 gives examples of established visual grades assigned to strength classes.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14081-3:2022(Main)
Timber structures - Strength graded structural timber with rectangular cross section - Part 3: Machine grading; additional requirements for factory production control
EN 14081-3:2022

This document specifies requirements additional to those given in EN 14081-1 for factory production control of machine graded structural timber with rectangular cross-sections shaped by sawing, planing or other methods, and having deviations from the target sizes corresponding to EN 336.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14081-1:2016+A1:2019(Main)
Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements
EN 14081-1:2016+A1:2019

This European Standard specifies requirements for strength graded structural timber with rectangular cross-sections either visual or machine graded, shaped by sawing, planning or other methods and with cross-sectional dimensions complying with EN 336 (referred to as structural timber in the following clauses).
This European Standard includes provisions for test methods, Assessment and Verification of Constancy of Performance and marking of structural timber.
NOTE 1   For machine strength graded timber additional provisions for type testing (TT) are given in EN 14081-2 and for factory production control (FPC) in EN 14081-3.
NOTE 2   An acceptance procedure for verification of a lot is given in EN 14358 which may be used for a delivery of structural timber.
This European Standard identifies characteristics for which limits have to be given in visual grading standards.
This European Standard covers structural timber, untreated or treated against biological attack.
This European Standard does not cover:
-   timber treated by fire retardant products to improve its fire performance;
-   thermally and/or chemically modified timber;
-   structural finger jointed timber.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16485:2014(Main)
Round and sawn timber - Environmental Product Declarations - Product category rules for wood and wood-based products for use in construction
EN 16485:2014

EN 16485 provides general Product Category Rules (PCR) for Type III environmental declarations for wood and wood-based products for use in construction and related construction and in-service processes. This European Standard complements the core rules for the product category of construction products as defined in EN 15804 and is intended to be used in conjunction with EN 15804. The core PCR: - define the parameters to be declared and the way in which they are collated and reported; - describe which stages of a product’s life cycle are considered in the EPD and which processes are to be included in the life cycle stages; - define rules for the development of scenarios; - include the rules for calculating the Life Cycle Inventory and the Life Cycle Impact Assessment underlying the EPD, including the specification of the data quality to be applied; - include the rules for reporting predetermined, environmental and health information, that is not covered by LCA for a product, construction process and construction service where necessary; - define the conditions under which construction products can be compared based on the information provided by EPD. For the EPD of construction services, the same rules and requirements apply as for the EPD of construction products. Additionally to the common parts of EN 15804, this European Standard for wood and wood-based products: - defines the system boundaries; - defines the rules for modelling and assessment of material-specific characteristics such as carbon storage and energy content of wood; - defines allocation procedures for multi-output processes along the wood chain; - defines allocation procedures for reuse, recycling and energy recovery; - includes the rules for calculating the Life Cycle Inventory and the Life Cycle Impact Assessment underlying the EPD, including the assessment of carbon and energy content of wood; - provides guidance/specific rules for the determination of the Reference Service Life (RSL). This European Standard is intended to be used for cradle to gate or cradle to grave assessment, provided the intention is properly stated in the system boundary description.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 408:2010+A1:2012(Main)
Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties
EN 408:2010+A1:2012

This European Standard specifies test methods for determining the following properties of structural timber and glued laminated timber: modulus of elasticity in bending; shear modulus; bending strength; modulus of elasticity in tension parallel to the grain; tension strength parallel to the grain; modulus of elasticity in compression parallel to the grain; compression strength parallel to the grain; modulus of elasticity in tension perpendicular to the grain; tension strength perpendicular to the grain; modulus of elasticity in compression perpendicular to the grain; compression strength perpendicular to the grain and shear strength.
In addition, the determination of dimensions, moisture content, and density of test pieces are specified.
The methods apply to rectangular and circular shapes (of substantially constant cross section) of solid unjointed timber or finger-jointed timber and glued laminated timber unless stated otherwise.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day