iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 11688-1:1999

(Main)

Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)

Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)

This International Technical Report is an aid to understanding the basic concepts of noise control in machinery and equipment.  The recommended practice presented here is intended to assist the designer at any design stage control the noise of the final product. Methodical development of products was chosen as a basis for the structure of this document (see Clause 4).  The list of design rules given in this International Technical Report is not exhaustive. Other technical measures for reducing noise at the design stage may be used if their efficacy is identical or higher.  To solve problems going beyond the scope of this International Technical Report, the designer can be refer to the bibliography in Annex D, which presents the general state of accoustic handbooks at the time of publication. Furthermore, reference is made to the numerous tehnical publications dealing with acoustical problems.

Akustik - Richtlinien für die Konstruktion lärmarmer Maschinen und Geräte - Teil 1: Planung (ISO/TR 11688-1:1995)

Dieser Internationale Fachbericht unterstützt das Verständnis der Grundlagen der Lärmminderung bei Maschinen und Anlagen. Die hier vorgestellte Richtlinien sollen den Konstrukteur in allen Konstruktionsphasen bei der Lärmminderung am Endprodukt unterstützen. Das methodische Vorgehen bei der Produktenwicklung wurde als Grundlage für die Strukturierung dieses Dokumentes gewählt.

Acoustique - Pratique recommandée pour la conception de machines et d'équipements a bruit réduit - Partie 1: Planification (ISO/TR 11688-1:1995)

Akustika - Priporočila za konstruiranje tihih strojev in naprav - 1. del: Načrtovanje (ISO/TR 11688-1:1995)

General Information

Status
Withdrawn
Publication Date
31-Oct-1999
Withdrawal Date
27-Aug-2009
ICS
17.140.20 - Noise emitted by machines and equipment
21.020 - Characteristics and design of machines, apparatus, equipment
Technical Committee
AKU - Acoustics
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
28-Aug-2009
Due Date
20-Sep-2009
Completion Date
28-Aug-2009
Directive
98/37/EC - Machinery
Mandate
M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
Ref Project
EN ISO 11688-1:1998 - Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)

Relations

Corrected By
SIST EN ISO 11688-1:1999/AC:2004 - Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
Effective Date
22-Dec-2008
Replaced By
SIST EN ISO 11688-1:2009 - Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
Effective Date
01-Nov-2009
Replaced By
SIST EN ISO 11688-1:2009 - Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
Effective Date
08-Jun-2022
Corrected By
SIST EN ISO 11688-1:1999/AC:2004 - Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
Effective Date
08-Jun-2022

Buy Standard

EN ISO 11688-1:1999EN ISO 11688-1:1999
PreviousNext
Standard
EN ISO 11688-1:1999
English language
40 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11688-1:1999
01-november-1999
$NXVWLND3ULSRURþLOD]DNRQVWUXLUDQMHWLKLKVWURMHYLQQDSUDYGHO1DþUWRYDQMH
,6275
Acoustics - Recommended practice for the design of low-noise machinery and
equipment - Part 1: Planning (ISO/TR 11688-1:1995)
Akustik - Richtlinien für die Konstruktion lärmarmer Maschinen und Geräte - Teil 1:
Planung (ISO/TR 11688-1:1995)
Acoustique - Pratique recommandée pour la conception de machines et d'équipements a
bruit réduit - Partie 1: Planification (ISO/TR 11688-1:1995)
Ta slovenski standard je istoveten z: EN ISO 11688-1:1998
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
21.020 =QDþLOQRVWLLQQDþUWRYDQMH Characteristics and design of
VWURMHYDSDUDWRYRSUHPH machines, apparatus,
equipment
SIST EN ISO 11688-1:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11688-1:1999

---------------------- Page: 2 ----------------------

SIST EN ISO 11688-1:1999

---------------------- Page: 3 ----------------------

SIST EN ISO 11688-1:1999

---------------------- Page: 4 ----------------------

SIST EN ISO 11688-1:1999

---------------------- Page: 5 ----------------------

SIST EN ISO 11688-1:1999

---------------------- Page: 6 ----------------------

SIST EN ISO 11688-1:1999

---------------------- Page: 7 ----------------------

SIST EN ISO 11688-1:1999

---------------------- Page: 8 ----------------------

SIST EN ISO 11688-1:1999

---------------------- Page: 9 ----------------------

SIST EN ISO 11688-1:1999

---------------------- Page: 10 ----------------------

SIST EN ISO 11688-1:1999

---------------------- Page: 11 ----------------------

SIST EN ISO 11688-1:1999

---------------------- Page: 12 ----------------------

SIST EN ISO 11688-1:1999

---------------------- Page: 13 ----------------------

SIST EN ISO 11688-1:1999

---------------------- Page: 14 ----------------------

SIST EN ISO 11688-1:1999

---------------------- Page: 15 ----------------------

SIST EN ISO 11688-1:1999

---------------------- Page: 16 ----------------------

SIST EN ISO 11688-1:1999

---------------------- Page: 17 ----------------------

SIST EN ISO 11688-1:1999

----------------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 4871:2009(Main)
Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
EN ISO 4871:2009

This International Standard - gives information on the declaration of noise emission values, - describes acoustical and product information to be presented in technical documents for the purposes of noise emission declaration, and - specifies a method for verifying the noise emission declaration. It is applicable to machinery and equipment. The values to be used for the purposes of noise emission declaration are either declared singlenumber noise emission values, L,, or declared dualnumber noise emission values, L and K. L is a noise emission value determined directly from measurements and K is the uncertainty associated with those measurements. Ld is the sum of L and K and represents an upper limit which values from repeated measurements are unlikely to exceed at a given confidence level; Ld corresponds to the stated or labelled value, Lc, defined in IS0 7574-l. The two forms of noise declaration are alternative means of representing any or all of the A-weighted sound power level, &*, the A-weighted emission sound pressure level at specified positions, LpA, and the C-weighted peak emission sound pressure level at specified positions, Lpc peak. The choice as to which of the two forms is used'in a particular case depends upon the requirements to be fulfilled. This selection is made, and guidance on the values of K is given, in the appropriate noise test code. Guidelines for determining declared noise emission values are given in annex A.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11688-1:2009(Main)
Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
EN ISO 11688-1:2009

This International Technical Report is an aid to understanding the basic concepts of noise control in machinery and equipment. The recommended practice presented here is intended to assist the designer at any design stage to control the noise of the final product. Methodical development of products was chosen as a basis for the structure of this document (see Clause 4). The list of design rules given in this International Technical Report is not exhaustive. Other technical measures for reducing noise at the design stage may be used if their efficacy is identical or higher. To solve problems going beyond the scope of this International Technical Report, the designer can refer to
the bibliography in Annex D, which presents the general state of acoustic handbooks at the time of
publication. Furthermore, reference is made to the numerous technical publications dealing with acoustical problems.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11688-2:2001(Main)
Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998)
EN ISO 11688-2:2000

Migrated from Progress Sheet (TC Comment) (2000-07-10): BC/CEN/88/13.212 is covered by WI 36 and 37. ++ Selected as type'B' (comparison) in the one language experiment ++ The TC Secretary want to publish a European Standard based on a published Inter- ++ national Technical Report ISO/TR 11688-2:1998 (TA/981012)

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4871:2009(Main)
Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
EN ISO 4871:2009

This International Standard - gives information on the declaration of noise emission values, - describes acoustical and product information to be presented in technical documents for the purposes of noise emission declaration, and - specifies a method for verifying the noise emission declaration. It is applicable to machinery and equipment. The values to be used for the purposes of noise emission declaration are either declared singlenumber noise emission values, L,, or declared dualnumber noise emission values, L and K. L is a noise emission value determined directly from measurements and K is the uncertainty associated with those measurements. Ld is the sum of L and K and represents an upper limit which values from repeated measurements are unlikely to exceed at a given confidence level; Ld corresponds to the stated or labelled value, Lc, defined in IS0 7574-l. The two forms of noise declaration are alternative means of representing any or all of the A-weighted sound power level, &*, the A-weighted emission sound pressure level at specified positions, LpA, and the C-weighted peak emission sound pressure level at specified positions, Lpc peak. The choice as to which of the two forms is used'in a particular case depends upon the requirements to be fulfilled. This selection is made, and guidance on the values of K is given, in the appropriate noise test code. Guidelines for determining declared noise emission values are given in annex A.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11688-1:2009(Main)
Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
EN ISO 11688-1:2009

This International Technical Report is an aid to understanding the basic concepts of noise control in machinery and equipment. The recommended practice presented here is intended to assist the designer at any design stage to control the noise of the final product. Methodical development of products was chosen as a basis for the structure of this document (see Clause 4). The list of design rules given in this International Technical Report is not exhaustive. Other technical measures for reducing noise at the design stage may be used if their efficacy is identical or higher. To solve problems going beyond the scope of this International Technical Report, the designer can refer to
the bibliography in Annex D, which presents the general state of acoustic handbooks at the time of
publication. Furthermore, reference is made to the numerous technical publications dealing with acoustical problems.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11688-2:2001(Main)
Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998)
EN ISO 11688-2:2000

Migrated from Progress Sheet (TC Comment) (2000-07-10): BC/CEN/88/13.212 is covered by WI 36 and 37. ++ Selected as type'B' (comparison) in the one language experiment ++ The TC Secretary want to publish a European Standard based on a published Inter- ++ national Technical Report ISO/TR 11688-2:1998 (TA/981012)

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 12349:2023(Main)
Mechanical vibration - Guide to the health effects of vibration on the human body
CEN/TR 12349:2023

The aim of this CEN report is to provide information on the possible adverse health effects caused by exposure to vibration at work.  the report addresses manufacturers as well as employers and employees using vibrating machinery in order to improve their understanding of the possible health problems arising from occupational exposure to vibration.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80004-1:2023(Main)
Nanotechnologies - Vocabulary - Part 1: Core vocabulary (ISO 80004-1:2023)
EN ISO 80004-1:2023

This document defines core terms in the field of nanotechnology. This document is intended to facilitate communication between organizations and individuals in industry and those who interact with them.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-4:2023(Main)
Extenders - Specifications and methods of test - Part 4: Whiting (ISO 3262-4:2022)
EN ISO 3262-4:2023

This document specifies requirements and corresponding methods of test for whiting.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 1247-1:2023(Main)
Aluminium pigments for paints - Part 1: General aluminium pigments (ISO 1247-1:2021)
EN ISO 1247-1:2023

This document specifies the requirements and corresponding test methods for aluminium pigments suitable for use in paints including:
a) general, decorative and protective paints, and
b) special finishing paints.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day