SIST EN IEC 61753-071-02:2021/A1:2024

SLOVENSKI STANDARD
SIST EN IEC 61753-071-02:2021/A1:2024
01-junij-2024
Optični spojni elementi in pasivne komponente - Tehnični standard - 071-2. del:
Prostorska stikala brez konektorjev, 1 × 2 in 2 × 2, za enorodovna optična vlakna
za kategorijo C - Nadzorovana okolja - Dopolnilo A1 (IEC 61753-071-02/AMD1:2024)
Fibre optic interconnecting devices and passive components - Performance standard -
Part 071-02: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches
for category C - Controlled environments (IEC 61753-071-02/AMD1:2024)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
071-2: Nicht mit Steckverbindern versehene räumliche 1 x 2 und 2 x 2 Einmodenschalter
für die Kategorie C - Kontrollierte Umgebung (IEC 61753-071-02/AMD1:2024)
Dispositifs d’interconnexion et composants passifs fibroniques - Norme de performance -
Partie 071-02: Commutateurs spatiaux optiques unimodaux 1 x 2 et 2 x 2 non
connectorisés pour la catégorie C - Environnements contrôlés (IEC 61753-071-
02/AMD1:2024)
Ta slovenski standard je istoveten z: EN IEC 61753-071-02:2020/A1:2024
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
SIST EN IEC 61753-071-02:2021/A1:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61753-071-02:2021/A1:2024

---------------------- Page: 2 ----------------------
SIST EN IEC 61753-071-02:2021/A1:2024


EUROPEAN STANDARD EN IEC 61753-071-02:2020/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM April 2024
ICS 33.180.20

English Version
Fibre optic interconnecting devices and passive components -
Performance standard - Part 071-02: Non-connectorized single-
mode fibre optic 1 × 2 and 2 × 2 spatial switches for category C -
Controlled environments
(IEC 61753-071-02/AMD1:2024)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive
fibroniques - Norme de performance - Partie 071-02: Bauteile - Betriebsverhalten - Teil 071-2: Nicht mit
Commutateurs spatiaux optiques unimodaux 1 x 2 et 2 x 2 Steckverbindern versehene räumliche 1 x 2 und 2 x 2
non connectorisés pour la catégorie C - Environnements Einmodenschalter für die Kategorie C - Kontrollierte
contrôlés Umgebung
(IEC 61753-071-02/AMD1:2024) (IEC 61753-071-02/AMD1:2024)
This amendment A1 modifies the European Standard EN IEC 61753-071-02:2020; it was approved by CENELEC on 2024-03-29.
CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61753-071-02:2020/A1:2024 E

---------------------- Page: 3 ----------------------
SIST EN IEC 61753-071-02:2021/A1:2024
EN IEC 61753-071-02:2020/A1:2024 (E)
European foreword
The text of document 86B/4780/CDV, future IEC 61753-071-02/AMD1, prepared by SC 86B "Fibre
optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61753-071-02:2020/A1:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-12-29
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-03-29
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any o
...