SIST EN 301 087 V8.2.1:2003
(Main)Digital cellular telecommunications system (Phase 2 and Phase 2+) (GSM); Base Station System (BSS) equipment specification; Radio aspects (GSM 11.21 version 8.2.1 Release 1999)
- Abstract
s31b 00-190 865/008.1.0 A122 1 R99 EDGE TX-test cases and uncertainties 8.2.0 00-190 868/00 8.1.0A123 1 R99 EDGE radio link management test cases 8.2.0 00-191 532/00 8.1.0A124 R99 Corrections of GSM 400 Spurious 8.2.0 00-190 869/00 8.1.0A125 2 R99 Changes in clause 7 due to EDGE and GSM850 8.2.0
- Status
- Published
- Publication Date
- 30-Nov-2003
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Dec-2003
- Due Date
- 01-Dec-2003
- Completion Date
- 01-Dec-2003
SIST EN 301 087 V8.2.1:2003 is the Slovenian adoption of the ETSI European Standard EN 301 087 V8.2.1 for GSM Base Station System (BSS) radio aspects. It specifies RF test methods and conformance requirements for GSM400, GSM850, GSM900, DCS1800, PCS1900, MXM850 and MXM1900 BSS equipment, for manufacturers, test laboratories, operators and approval bodies that need a common way to check radio performance.
What does SIST EN 301 087 V8.2.1:2003 specify?
SIST EN 301 087 V8.2.1:2003 specifies RF test methods and conformance requirements for BSS equipment in GSM Phase 2 and Phase 2+. It is built around two levels of conformance - essential conformance and complete conformance - so a reader can see what is enough for type approval and what is needed for fuller performance characterization.
The document is organized as follows:
- Clauses 1-4 cover scope, references, definitions, frequency bands, channels, and general test conditions.
- Clause 5 sets the test format and how to read the results.
- Clause 6 covers transmitter tests.
- Clause 7 covers receiver tests.
- Clause 8 covers radiated spurious emissions.
- Clause 9 covers radio link management.
| Annex | What it covers |
|---|---|
| Annex A | Testing of statistical parameters |
| Annex B | Description of special test equipment |
| Annex C | Number of samples needed for statistical testing |
| Annex D | Change history |
What are the key requirements of SIST EN 301 087 V8.2.1:2003?
Clause 4 requires the manufacturer to declare the supported frequency bands, the supported frequency range, whether Slow Frequency Hopping (SFH) and RF power control are supported, and the declared output power per TRX. In practice, these declarations set the test conditions and determine which measurements are applicable.
Clause 4 also defines how tests are run in normal and extreme environments, including temperature, humidity, pressure, vibration and power supply limits, and it ties pass/fail decisions to measurement uncertainty. In practice, the test report must show both the measured value and the uncertainty, so the result can be judged against the limit.
Clause 4.10 explains how to treat different BSS configurations such as receiver diversity, duplexers, ancillary RF amplifiers, antenna arrays and BTS supporting 8-PSK modulation. This matters because the test setup may need to follow the worst-case configuration or include extra network elements to reflect normal use.
Clause 6 covers transmitter performance. It checks static Layer 1 functions, modulation accuracy, mean transmitted RF carrier power, carrier power versus time, adjacent-channel power, conducted spurious emissions, intermodulation attenuation and intra-Base Station System intermodulation attenuation. In practice, these tests verify that the transmitter stays inside its intended spectrum, power and timing mask.
Clause 7 covers receiver performance. It includes static receiver functions, erroneous frame indication performance, reference sensitivity, multipath sensitivity, reference interference level, blocking, intermodulation, AM suppression and spurious emissions from the receiver antenna connector. In practice, this shows whether the receiver still works when wanted signals are weak or when other signals are present.
Clause 8 covers radiated spurious emissions, and clause 9 covers radio link management, including synchronization, frame structure, signal strength, signal quality, idle channel signal level and adaptive frame alignment. These clauses matter because they check on-air behavior, not just conducted RF performance at a connector.
What terms does SIST EN 301 087 V8.2.1:2003 define?
- BSS (Base Station System) - In this document, BSS applies to both BTS and integrated BSS equipment.
- BTS (Base Transceiver Station) - The radio station whose RF connector is the main measurement reference point in most tests.
- TRX (Transceiver) - The transmitter/receiver unit that is tested as part of the BSS configuration.
- BSSTE (Base Station System Test Equipment) - The dedicated test equipment described in Annex B.
- SFH (Slow Frequency Hopping) - A mode where the BSS changes RF channel on a timeslot-by-timeslot basis.
- GMSK (Gaussian Minimum Shift Keying) - The modulation type used in many transmitter and receiver tests.
- 8-PSK (8-phase shift keying) - The higher-order modulation type tested where the TRX supports it.
- ARFCN (Absolute Radio Frequency Channel Number) - The channel number used to identify the RF carrier under test.
Who uses SIST EN 301 087 V8.2.1:2003?
Manufacturers use SIST EN 301 087 V8.2.1:2003 to design and verify BSS radio performance before release. Test laboratories use it to run consistent conformance tests and document uncertainties, frequencies and configurations.
Operators use it when they need acceptance testing or need to agree which TRXs, bands and configurations should be checked. Approval and certification bodies use it to compare results across suppliers, especially for essential conformance and type approval decisions.
Which standards are used with SIST EN 301 087 V8.2.1:2003?
- GSM01.04 - gives the abbreviations and acronyms used in the document.
- GSM05.01, GSM05.02, GSM05.03, GSM05.04, GSM05.05, GSM05.08 and GSM05.10 - define the radio path, multiplexing, channel coding, modulation, transmission and reception, link control and synchronization used by the test requirements.
- GSM04.22 and GSM08.20 - support the data and rate adaptation aspects referred to in the scope and tests.
- ETR027 and ETR028 - provide measurement methods and measurement uncertainty guidance.
- ETS300019-1, IEC68-2 and IEC721 - provide the environmental test and classification framework.
- ETS300113 - provides technical characteristics and test conditions for radio equipment with an antenna connector.
What does the SIST EN 301 087 V8.2.1:2003 document contain?
The document is mainly a test specification with tables, procedures, limits and setup rules. Tables 1 and 2 define the GSM-related frequency bands and channel numbering, while later tables give power classes, power masks, spurious emission limits and receiver limits.
Figures 1a and 1b show test setups for receiver and transmitter testing with antenna arrays, and Figures 2, 2a, 3, 4 and 5 show timing and spectrum masks for power ramping and intermodulation tests. Annex A gives the statistical method behind sample-based testing, Annex B describes special equipment such as BSSTE and simulators, and Annex C gives sample counts for statistical testing.
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST EN 301 087 V8.2.1:2003 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Digital cellular telecommunications system (Phase 2 and Phase 2+) (GSM); Base Station System (BSS) equipment specification; Radio aspects (GSM 11.21 version 8.2.1 Release 1999)". This standard covers: s31b 00-190 865/008.1.0 A122 1 R99 EDGE TX-test cases and uncertainties 8.2.0 00-190 868/00 8.1.0A123 1 R99 EDGE radio link management test cases 8.2.0 00-191 532/00 8.1.0A124 R99 Corrections of GSM 400 Spurious 8.2.0 00-190 869/00 8.1.0A125 2 R99 Changes in clause 7 due to EDGE and GSM850 8.2.0
s31b 00-190 865/008.1.0 A122 1 R99 EDGE TX-test cases and uncertainties 8.2.0 00-190 868/00 8.1.0A123 1 R99 EDGE radio link management test cases 8.2.0 00-191 532/00 8.1.0A124 R99 Corrections of GSM 400 Spurious 8.2.0 00-190 869/00 8.1.0A125 2 R99 Changes in clause 7 due to EDGE and GSM850 8.2.0
SIST EN 301 087 V8.2.1:2003 is classified under the following ICS (International Classification for Standards) categories: 33.070.50 - Global System for Mobile Communication (GSM). The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 301 087 V8.2.1:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Digital cellular telecommunications system (Phase 2 and Phase 2+) (GSM); Base Station System (BSS) equipment specification; Radio aspects (GSM 11.21 version 8.2.1 Release 1999)33.070.50Globalni sistem za mobilno telekomunikacijo (GSM)Global System for Mobile Communication (GSM)ICS:Ta slovenski standard je istoveten z:EN 301 087 Version 8.2.1SIST EN 301 087 V8.2.1:2003en01-december-2003SIST EN 301 087 V8.2.1:2003SLOVENSKI
STANDARD
ETSIEN301087V8.2.1(2000-10)EuropeanStandard(Telecommunicationsseries)Digitalcellulartelecommunicationssystem(Phase2&Phase2+);BaseStationSystem(BSS)equipmentspecification;Radioaspects(GSM11.21version8.2.1Release1999)GLOBALSYSTEMFORMOBILECOMMUNICATIONSRSIST EN 301 087 V8.2.1:2003
ETSIETSIEN301087V8.2.1(2000-10)2(GSM11.21version8.2.1Release1999)ReferenceREN/SMG-021121Q8R1KeywordsDigitalcellulartelecommunicationssystem,GlobalSystemforMobilecommunications(GSM)ETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:+33492944200Fax:+33493654716SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://www.etsi.org/tb/status/Ifyoufinderrorsinthepresentdocument,sendyourcommentto:editor@etsi.frCopyrightNotificationNopartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2000.Allrightsreserved.SIST EN 301 087 V8.2.1:2003
ETSIETSIEN301087V8.2.1(2000-10)3(GSM11.21version8.2.1Release1999)ContentsIntellectualPropertyRights.8Foreword.81Scope.92References.103Definitions,abbreviations,frequencybandsandchannels.113.1Definitions.113.2Abbreviations.123.3Frequencybandsandchannels.123.3.1Frequencybands.123.3.2Channelsandchannelnumbering.134Generaltestconditionsanddeclarations.134.1Outputpoweranddeterminationofpowerclass.134.2Specifiedfrequencyrange.144.3Frequencyhopping.144.4RFpowercontrol.144.5Downlinkdiscontinuoustransmission(DTX).144.6Testenvironments.154.6.1Normaltestenvironment.154.6.2Extremetestenvironment.154.6.2.1Extremetemperature.154.6.3Vibration.164.6.4Powersupply.164.7Acceptableuncertaintyofmeasurementequipment.164.8Interpretationofmeasurementresults.204.9Selectionofconfigurationsfortesting.204.10BTSConfigurations.214.10.1Receiverdiversity.214.10.2Duplexers.214.10.3Powersupplyoptions.224.10.4AncillaryRFamplifiers.224.10.5BSSusingantennaarrays.234.10.6BTSsupporting8-PSKmodulation.245Formatandinterpretationoftests.246Transmitter.256.1StaticLayer1functions.256.1.1Testpurpose.256.1.2Testcase.256.1.3Essentialconformance.256.1.4Completeconformance.256.1.5Requirementreference.266.2Modulationaccuracy.266.2.1Testpurpose.266.2.2Testcase.266.2.3Essentialconformance.276.2.4Completeconformance.286.2.5Requirementreference.286.3MeantransmittedRFcarrierpower.286.3.1Testpurpose.286.3.2Testcase.286.3.3Essentialconformance.296.3.4Completeconformance.296.3.5Requirementreference.306.4TransmittedRFcarrierpowerversustime.30SIST EN 301 087 V8.2.1:2003
ETSIETSIEN301087V8.2.1(2000-10)4(GSM11.21version8.2.1Release1999)6.4.1Testpurpose.306.4.2Testcase.306.4.3Essentialconformance.316.4.4Completeconformance.316.4.5Requirementreference.336.5Adjacentchannelpower.336.5.1Spectrumduetomodulationandwidebandnoise.336.5.1.1Testpurpose.336.5.1.2Testcase.336.5.1.3EssentialConformance.346.5.1.4Completeconformance.366.5.1.5Requirementreference.366.5.2Switchingtransientsspectrum.366.5.2.1Testpurpose.366.5.2.2Testcase.366.5.2.3Essentialconformance.386.5.2.4Completeconformance.386.5.2.5Requirementreference.386.6Spuriousemissionsfromthetransmitterantennaconnector.386.6.1Conductedspuriousemissionsfromthetransmitterantennaconnector,insidetheBTStransmitband.396.6.1.1TestPurpose.396.6.1.2TestCase.396.6.1.3Essentialconformance.396.6.1.4Completeconformance.396.6.1.5RequirementReference.396.6.2Conductedspuriousemissionsfromthetransmitterantennaconnector,outsidetheBTStransmitband.396.6.2.1Applicability(Phase2).396.6.2.1.1TestPurpose.406.6.2.1.2TestCase.406.6.2.1.3Essentialconformance.416.6.2.1.4Completeconformance.416.6.2.1.5RequirementReference.416.6.2.2Applicability(Phase2+).416.6.2.2.1TestPurpose.416.6.2.2.2TestCase.426.6.2.2.3Essentialconformance.436.6.2.2.4Completeconformance.436.6.2.2.5RequirementReference.446.7Intermodulationattenuation.446.7.1Testpurpose.446.7.2Testcase.446.7.3EssentialConformance.456.7.4Completeconformance.466.7.5Requirementreference.476.8IntraBaseStationSystemintermodulationattenuation.476.8.1Testpurpose.476.8.2Testcase.476.8.3Essentialconformance.486.8.4Completeconformance.486.8.5Requirementreference.496.9IntraBaseStationSystemintermodulationattenuation,MXM850andMXM1900.496.9.1Testpurpose.496.9.2Testcase.496.9.3Essentialconformance.496.9.4Completeconformance.496.9.5Requirementreference.496.10IntraBaseStationSystemintermodulationattenuation,PCS1900andGSM850.506.10.1Testpurpose.506.10.2Testcase.506.10.3Essentialconformance.506.10.4Completeconformance.51SIST EN 301 087 V8.2.1:2003
ETSIETSIEN301087V8.2.1(2000-10)5(GSM11.21version8.2.1Release1999)6.10.5Requirementreference.517Receivers.517.1StaticLayer1receiverfunctions(nominalerrorratios).517.1.1TestPurpose.517.1.2TestCase.527.1.3Essentialconformance.537.1.4Completeconformance.537.1.5RequirementReference.547.2ErroneousFrameIndicationPerformance.547.2.1TestPurpose.547.2.2TestCase.547.2.3Essentialconformance.557.2.4Completeconformance.557.2.5Requirementreference.557.3StaticReferenceSensitivityLevel.557.3.1TestPurpose.557.3.2TestCase.557.3.3Essentialconformance.577.3.4Completeconformance.577.3.5RequirementsReference.587.4MultipathReferenceSensitivityLevel.597.4.1TestPurpose.597.4.2TestCase.597.4.3Essentialconformance.617.4.4Completeconformance.627.4.5RequirementReference.667.5Referenceinterferencelevel.667.5.1TestPurpose.667.5.2TestCase.667.5.3Essentialconformance.707.5.4Completeconformance.737.5.5RequirementsReference.787.6BlockingCharacteristics.787.6.1TestPurpose.787.6.2TestCase.787.6.3Essentialconformance.827.6.4Completeconformance.837.6.5Requirementsreference.837.7Intermodulationcharacteristics.837.7.1TestPurpose.837.7.2TestCase.837.7.3Essentialconformance.857.7.4Completeconformance.857.7.5RequirementReference.857.8AMsuppression.857.8.1TestPurpose.857.8.2TestCase.857.8.3Essentialconformance.877.8.4Completeconformance.877.8.5RequirementReference.877.9Spuriousemissionsfromthereceiverantennaconnector.877.9.1TestPurpose.877.9.2TestCase.877.9.3Essentialconformance.877.9.4Completeconformance.887.9.5RequirementReference.888Radiatedspuriousemissions.888.1TestPurpose.888.2TestCase.888.3Essentialconformance.89SIST EN 301 087 V8.2.1:2003
ETSIETSIEN301087V8.2.1(2000-10)6(GSM11.21version8.2.1Release1999)8.4Completeconformance.908.5Requirementreference.909Radiolinkmanagement.909.1General.909.2Synchronization.909.2.1TimingTolerance.919.2.1.1Testpurpose.919.2.1.2Testcase.919.2.1.3Essentialconformance.919.2.1.4Completeconformance.919.2.1.5Requirementreference.929.3Framestructure.929.3.1BCCHMultiframe.929.3.1.1Testpurpose.929.3.1.2Testcase.929.3.1.3Essentialconformance.929.3.1.4Completeconformance.929.3.1.5Requirementreference.929.3.2TDMA-framestructure.939.3.2.1Testpurpose.939.3.2.2Testcase.939.3.2.3Essentialconformance.939.3.2.4Completeconformance.939.3.2.5Requirementreference.939.4Radiolinkmeasurements.939.4.1SignalStrength.949.4.1.1MeasurementAccuracy.949.4.1.1.1Testpurpose.949.4.1.1.2Testcase.949.4.1.1.3Essentialconformance.949.4.1.1.4Completeconformance.949.4.1.2Selectivityofsignalstrengthmeasurements.959.4.1.2.1Testpurpose.959.4.1.2.2Testcase.959.4.1.2.3Essentialconformance.969.4.1.2.4Completeconformance.969.4.1.2.5Requirementreference.969.4.2Signalquality.979.4.2.1Testpurpose.979.4.2.2Testcase.979.4.2.3Essentialconformance.979.4.2.4Completeconformance.979.4.2.5Requirementreference.989.4.3Idlechannelsignallevel.989.4.3.1Testpurpose.989.4.3.2Testcase.989.4.3.3Essentialconformance.999.4.3.4Completeconformance.999.4.3.5Requirementreference.999.5Adaptiveframealignment.999.5.1Testpurpose.999.5.2Testcase.1009.5.3Essentialconformance.1009.5.4Completeconformance.1009.5.5Requirementreference.101SIST EN 301 087 V8.2.1:2003
ETSIETSIEN301087V8.2.1(2000-10)7(GSM11.21version8.2.1Release1999)AnnexA(informative):Testingofstatisticalparameters.102A.1Generaltheoreticalmethodology.102A.2Detailedtheoreticalmethodology.104A.3Limitationsandcorrectionstothetheoreticalmethodology.105A.3.1Independenterrors.105A.3.2Gaussiandistribution.105A.3.3Stationaryrandomprocesses.105A.3.4Lowerrorratios.106A.3.5Totalcorrections.106A.4Alternativeexperimentalmethodology.106A.5Detaileddefinitionoferrorevents.107AnnexB(informative):Descriptionofspecialtestequipment.108B.1BaseStationSystemTestEquipment(BSSTE).108B.1.1Fadingandmultipathpropagationsimulator.108B.2MeasurementsetupsforTXintermodulation.108B.2.1Testset-upforIntermodulationAttenuation(6.7.).108B.2.1.1RX-Band.109B.2.1.2OutsideRXBand.109B.2.2Testset-upforIntraBSSIntermodulationAttenuation(6.8.).110B.2.2.1RX-Band.110B.2.2.2TX-Band.110AnnexC(informative):Numberofsamplesneededforstatisticaltesting.111C.1GSM900;Numberofsamplesfortesting.111C.2DCS1800;NumberofSamplesforTesting.131AnnexD(informative):Changehistory.152History.154SIST EN 301 087 V8.2.1:2003
ETSIETSIEN301087V8.2.1(2000-10)8(GSM11.21version8.2.1Release1999)IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinETSISR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinETSISR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSITechnicalCommitteeSpecialMobileGroup(SMG).ThepresentdocumentspecifiestheRadioFrequency(RF)testmethodsandconformancerequirementsforGSM400,GSM900andDCS1800,PCS1900,MXM850andMXM1900BaseStationSystems(BSS)swithintheDigitalcellulartelecommunicationssystem(Phase2+).ThecontentsofthepresentdocumentmaybesubjecttocontinuingworkwithinSMGandmaychangefollowingformalSMGapproval.ShouldSMGmodifythecontentsofthepresentdocumentitwillthenbere-submittedforformalapprovalproceduresbyETSIwithanidentifyingchangeofreleasedateandanincreaseinversionnumberasfollows:Version8.x.ywhere:8GSMPhase2+Release1999.xtheseconddigitisincrementedforchangesofsubstance,i.e.technicalenhancements,corrections,updates,etc.;ythethirddigitisincrementedwheneditorialonlychangeshavebeenincorporatedinthespecification.NOTE:Thepresentdocumentcontainsbothessentialconformancerequirementsandcompleteconformancerequirements.Essentialconformancerequirementsarethoserequirementswhichmaybedeemedsufficientforradiotypeapprovalpurposes,completeconformancerequirementscoverallconformanceaspects.NationaltranspositiondatesDateofadoptionofthisEN:29September2000DateoflatestannouncementofthisEN(doa):31December2000DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):30June2001DateofwithdrawalofanyconflictingNationalStandard(dow):30June2001SIST EN 301 087 V8.2.1:2003
ETSIETSIEN301087V8.2.1(2000-10)9(GSM11.21version8.2.1Release1999)1ScopeThepresentdocumentspecifiestheRadioFrequency(RF)testmethodsandconformancerequirementsforGSM400,GSM900andDCS1800,PCS1900,GSM850,MXM850andMXM1900BaseStationSystems(BSS)s.Thesehavebeenderivedfrom,andareconsistentwith,thecoreGSMspecificationsspecifiedintherequirementsreferenceclauseofeachtestwiththeexceptionthatrequirementsexpressedasareferencetoregulatorydocuments(e.g.FCC)havenotbeenincludedinthepresentdocument.ThepresentdocumentisapplicabletoBSSmeetingtherequirementsofeitherGSMPhase2orGSMPhase2+.Unlessotherwisestated,alltestsareapplicabletoBSSmeetingPhase2and/orPhase2+GSMrequirements,becausetherequirementsofthePhase2andPhase2+coreGSMspecificationswhicharereferencedinthetestareconsistent.MostdifferencesbetweenPhase2andPhase2+requirementsrepresentPhase2+featureswhichareoptionalfortheBSStosupport.Foreachtest,twoconformancerequirementsarespecified:-essentialconformancerequirements;-completeconformancerequirements.Essentialconformancerequirementsarethosewhicharerequired:a)toensurecompatibilitybetweentheradiochannelsin
...