33.070.50 - Global System for Mobile Communication (GSM)

This document specifies the interoperability of common external power supplies for use with
data-enabled mobile telephones. It defines the common charging capability and specifies
interface requirements for the external power supply.
Safety and EMC aspects are not covered by this document. Safety is covered by IEC 60950-1
or IEC 62368-1 and EMC is covered by regional /national standards.
This document defines interoperability based on legacy USB technologies and does not cover
charging int...view more

The present document identifies the 3GPP Technical Specifications containing provisions relating to the use of GSM
for application on railway networks.
The present document is applicable to GSM communication systems embraced by the European Council Directives
2008/57/EC [i.1] and 2009/131/EC [i.2] on the interoperability of the rail system within the Community.

NEW!IEC 62684:2018 is available as IEC 62684:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62684:2018 specifies the interoperability of common external power supplies for use with data-enabled mobile telephones. It defines the common charging capability and specifies interface requirements for the external power supply. Safety and EMC aspects are not covered by this document. Safety is...view more

The present document contains requirements aiming to demonstrate that that radio equipment both effectively uses and
supports the efficient use of radio spectrum in order to avoid harmful interference.
In regards to interference to systems operating in adjacent bands guidance for single carrier BTS and multicarrier BTS
is provided in ECC Report 146 [i.3].

The present document specifies technical characteristics and methods of measurements for the following radio
equipment type:
- GSM mobile station.
This radio equipment type is for operation within the Digital cellular telecommunications system in the GSM 900
and/or GSM 1800 frequency bands as shown in table 1, with a channel separation of 200 kHz, utilizing constant
envelope modulation and carrying traffic channels according to the Time Division Multiple Access (TDMA) principle.
The presen...view more

REN/MSG-0019-RED

The present document applies to the following radio equipment types:
1) Repeaters for GSM.
This radio equipment type is capable of operating in all or any part of the frequency bands given in table 1-1.
NOTE 1: In some circumstances, for instance when an operator (or more than one operator who co-ordinate the use of repeaters), is not allocated a complete band as defined in table 1-1, it may be necessary to restrict the frequency range of operations of repeaters. In these circumstances, the t...view more

The present document applies to the following radio telecommunications terminal equipment types:
- GSM mobile station.
This radio equipment type is for operation within the Digital cellular telecommunications system in the GSM 900
and/or GSM 1800 frequency bands as shown in table 1, with a channel separation of 200 kHz, utilizing constant
envelope modulation and carrying traffic channels according to the Time Division Multiple Access (TDMA) principle.The present document is intended to cover...view more

The present document is intended to cover the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive), Article 3.2,
which states that "….. radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In regards to interference to systems operating in adjacent bands guidance for single carrier BTS and multicarrier BTS
is provided in ECC Report 146 [i.4].
In addit...view more

This European Standard defines the requirements for the provision, visibility, readability, maintenance and testing of a specific set of ERTMS trackside boards associated with the following DMI and ETCS track conditions:
-   ETCS stop marker;
-   ETCS location marker, the trackside ETCS signal to identify a specific location on the line;
-   level transition, corresponding to transitions between ETCS levels;
-   lower pantograph;
-   pantograph lowered;
-   raise pantograph;
-   neutral section announc...view more

The present document applies to the following radio equipment type:
1) GSM base stations.
The present document is intended to cover the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive), Article 3.2, which states that "….. radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In regards to interference to systems operating in adjacent bands guidance fo...view more

The present document applies to the following radio equipment type: GSM base stations. The present document is intended to cover the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive), Article 3.2, which states that "….. radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In regards to interference to systems operating in adjacent bands guidance for sin...view more

The present document applies to the following radio equipment types:
Repeaters for GSM. These radio equipment types are capable of operating in all or any part of the frequency bands given in table 1-1.
NOTE 1: In some circumstances, for instance when an operator (or more than one operator who co-ordinate the use of repeaters), is not allocated a complete band as defined in table 1-1, it may be necessary to restrict the frequency range of operations of repeaters. In these circumstances, the te...view more

This International Standard specifies the interoperability of common external power supplies for use with data enabled mobile telephones. It defines the common charging capability and specifies interface requirements for the the external power supply. Safety and EMC aspects are not covered by this International Standard. Safety is covered by IEC 60950-1 and EMC is covered by EN 301 489-34.

IEC 62684:2011 specifies the interoperability of common external power supplies for use with data enabled mobile telephones. It defines the common charging capability and specifies interface requirements for the the external power supply. Safety and EMC aspects are not covered by this International Standard. Safety is covered by IEC 60950-1 and EMC is covered by EN 301 489-34. The French version of this standard has not been voted upon.

The present document applies to the following {radio}{telecommunications terminal} equipment types:
1) GSM base stations.
The present document is intended to cover the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive), article 3.2, which states that "….. radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In regards to interference to systems operati...view more

The present document applies to the following radio equipment types:
1) Repeaters for GSM;
These radio equipment types are capable of operating in all or any part of the frequency bands given in table 1-1.
NOTE: In some circumstances, for instance when an operator (or more than one operator who co-ordinate the use of repeaters), is not allocated a complete band as defined in table 1-1, it may be necessary to restrict the frequency range of operations of repeaters. In these circumstances, the ...view more

To develop an ETSI candidate harmonised standard for the onboard aircraft GSM system. The candidate harmonised standard shall outline the essential requirements according to article 3.2 of the R&TTE directive for the system.  The GSM onboard system provides GSM access in the 1800 MHz band while inhibiting direct connectivity between onboard mobiles and terrestrial cellular networks.  The system will use elements from existing relevant harmonised standards (EN 301 502) where appropriate. Note: th...view more

The present document identifies the 3GPP Technical Specifications which contain provisions relating to the use of GSM for application on railway networks. The present document is applicable to GSM communication systems embraced by the European Council Directives 96/48/EC [1] and 2001/16/EC [2] on the interoperability of the trans-European high-speed and conventional rail system.

The present document, together with EN 301 489-1 [1], covers the assessment of radio equipment meeting Phase 1, Phase 2, and Phase 2+ GSM and DCS digital cellular mobile and portable radio equipment transmitting and receiving speech and/or data, and operating in digital cellular radio telecommunications systems, and associated ancillary equipment in respect of ElectroMagnetic Compatibility (EMC). Technical specifications related to the antenna port and emissions from the enclosure port of radio ...view more