SIST EN 300 609-4 V9.2.1:2010

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Global System for Mobile communications (GSM) - Part 4: Harmonized EN for GSM Repeaters covering the essential requirements of article 3.2 of the R&TTE Directive33.070.50Globalni sistem za mobilno telekomunikacijo (GSM)Global System for Mobile Communication (GSM)ICS:Ta slovenski standard je istoveten z:EN 300 609-4 Version 9.2.1SIST EN 300 609-4 V9.2.1:2010en01-december-2010SIST EN 300 609-4 V9.2.1:2010SLOVENSKI

ETSI EN 300 609-4 V9.2.1 (2010-10)Harmonized European Standard (Telecommunications series) Global System for Mobile communications (GSM);Part 4: Harmonized EN for GSM Repeaterscovering the essential requirementsof article 3.2 of the R&TTE Directive SIST EN 300 609-4 V9.2.1:2010

Reference REN/MSG-00003 Keywords GSM, repeater ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE

Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88

Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.

DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. LTE™ is a Trade Mark of ETSI currently being registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 300 609-4 V9.2.1:2010

ETSI ETSI EN 300 609-4 V9.2.1 (2010-10) 3 Contents Intellectual Property Rights ................................................................................................................................ 5 Foreword ............................................................................................................................................................. 5 Introduction ........................................................................................................................................................ 5 1 Scope ........................................................................................................................................................ 6 2 References ................................................................................................................................................ 6 2.1 Normative references ......................................................................................................................................... 7 2.2 Informative references ........................................................................................................................................ 7 3 Definitions and abbreviations ................................................................................................................... 7 3.1 Definitions .......................................................................................................................................................... 7 3.2 Abbreviations ..................................................................................................................................................... 8 4 Technical requirements specifications ..................................................................................................... 8 4.1 Environmental profile ......................................................................................................................................... 8 4.2 Conformance requirements ................................................................................................................................ 8 4.2.1 Conducted spurious emissions ...................................................................................................................... 8 4.2.1.1 Definition ................................................................................................................................................ 8 4.2.1.2 Limit ........................................................................................................................................................ 8 4.2.1.3 Conformance ........................................................................................................................................... 9 4.2.2 Radiated spurious emissions ......................................................................................................................... 9 4.2.2.1 Definition ................................................................................................................................................ 9 4.2.2.2 Limit ........................................................................................................................................................ 9 4.2.2.3 Conformance ......................................................................................................................................... 10 4.2.3 Intermodulation attenuation ........................................................................................................................ 10 4.2.3.1 Definition .............................................................................................................................................. 10 4.2.3.2 Limit ...................................................................................................................................................... 10 4.2.3.3 Conformance ......................................................................................................................................... 10 4.2.4 Out-of-band gain ......................................................................................................................................... 10 4.2.4.1 Definition .............................................................................................................................................. 10 4.2.4.2 Limit ...................................................................................................................................................... 11 4.2.4.3 Conformance ......................................................................................................................................... 11 4.2.5 Frequency error ........................................................................................................................................... 11 4.2.5.1 Definition .............................................................................................................................................. 11 4.2.5.2 Limit ...................................................................................................................................................... 11 4.2.5.3 Conformance ......................................................................................................................................... 11 4.2.6 Modulation accuracy at GMSK modulation ............................................................................................... 11 4.2.6.1 Definition .............................................................................................................................................. 11 4.2.6.2 Limit ...................................................................................................................................................... 11 4.2.6.3 Conformance ......................................................................................................................................... 11 4.2.7 Modulation accuracy at 8-PSK, QPSK, 16-QAM or 32-QAM modulation ............................................... 12 4.2.7.1 Definition .............................................................................................................................................. 12 4.2.7.2 Limit ...................................................................................................................................................... 12 4.2.7.3 Conformance ......................................................................................................................................... 12 5 Testing for compliance with technical requirements .............................................................................. 12 5.1 Environmental conditions for testing ............................................................................................................... 12 5.2 Interpretation of the measurement results ........................................................................................................ 12 5.3 Essential radio test suites .................................................................................................................................. 13 5.3.1 Conducted spurious emissions .................................................................................................................... 13 5.3.1.1 Initial conditions ................................................................................................................................... 13 5.3.1.2 Procedures ............................................................................................................................................. 13 5.3.2 Radiated spurious emissions ....................................................................................................................... 14 5.3.2.1 Initial conditions ................................................................................................................................... 14 5.3.2.2 Procedures ............................................................................................................................................. 14 5.3.3 Intermodulation attenuation ........................................................................................................................ 14 5.3.3.1 Initial conditions ................................................................................................................................... 14 SIST EN 300 609-4 V9.2.1:2010

ETSI ETSI EN 300 609-4 V9.2.1 (2010-10) 4 5.3.3.2 Procedures ............................................................................................................................................. 14 5.3.4 Out-of-band gain ......................................................................................................................................... 15 5.3.4.1 Initial conditions ................................................................................................................................... 15 5.3.4.2 Procedures ............................................................................................................................................. 15 5.3.5 Frequency error ........................................................................................................................................... 16 5.3.5.1 Initial conditions ................................................................................................................................... 16 5.3.5.2 Procedures ............................................................................................................................................. 16 5.3.6 Modulation accuracy at GMSK modulation ............................................................................................... 16 5.3.6.1 Initial conditions ................................................................................................................................... 16 5.3.6.2 Procedures ............................................................................................................................................. 16 5.3.7 Modulation accuracy at 8-PSK, QPSK, 16-QAM or 32-QAM modulation ............................................... 17 5.3.7.1 Initial conditions ................................................................................................................................... 17 5.3.7.2 Procedures ............................................................................................................................................. 17 Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) ........................................................................................................ 18 Annex B (informative): Environmental profile specification ............................................................. 20 Annex C (informative): Testing of gain for part band repeaters ....................................................... 21 C.1 Rationale for this test .............................................................................................................................. 21 C.2 Gain outside pass band ........................................................................................................................... 21 C.2.1 Test purpose ..................................................................................................................................................... 21 C.2.2 Test case ........................................................................................................................................................... 21 C.2.3 Conformance requirement ................................................................................................................................ 21 Annex D (informative): The EN title in the official languages ........................................................... 22 Annex E (informative): Bibliography ................................................................................................... 23 History .............................................................................................................................................................. 24

ETSI ETSI EN 300 609-4 V9.2.1 (2010-10) 5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Mobile Standards Group (MSG). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC [i.1] (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the Directive 1999/5/EC [i.2] of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity ("the R&TTE Directive"). The requirements relevant to Directive 1999/5/EC [i.2] are summarized in annex A.

National transposition dates Date of adoption of this EN: 19 October 2010 Date of latest announcement of this EN (doa): 31 January 2011 Date of latest publication of new National Standard or endorsement of this EN (dop/e):

31 July 2011 Date of withdrawal of any conflicting National Standard (dow): 31 July 2012

Introduction The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.2]. The modular structure is shown in EG 201 399 [i.3]. SIST EN 300 609-4 V9.2.1:2010

ETSI ETSI EN 300 609-4 V9.2.1 (2010-10) 6 1 Scope The present document applies to the following radio equipment types: 1) Repeaters for GSM; These radio equipment types are capable of operating in all or any part of the frequency bands given in table 1-1. Table 1-1: GSM Repeater frequency bands

Direction of transmission GSM Repeater frequency bands P-GSM900 Downlink 935 MHz to 960 MHz Uplink 890 MHz to 915 MHz E-GSM900 Downlink 925 MHz to 960 MHz Uplink 880 MHz to 915 MHz R-GSM900 Downlink 921 MHz to 960 MHz Uplink 876 MHz to 915 MHz DCS1800 Downlink 1 805 MHz to 1 880 MHz Uplink 1 710 MHz to 1 785 MHz GSM450 Downlink 460,4 MHz to 467,6 MHz Uplink 450,4 MHz to 457,6 MHz GSM480 Downlink 488,8 MHz to 496 MHz Uplink 478,8 MHz to 486 MHz

NOTE: In some circumstances, for instance when an operator (or more than one operator who co-ordinate the use of repeaters), is not allocated a complete band as defined in table 1-1, it may be necessary to restrict the frequency range of operations of repeaters. In these circumstances, the test of "Gain outside operating band" in annex C may be used to verify the performance of the repeater. The present document covers requirements for GSM Repeaters for Release 8. The present document is intended to cover the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive), article 3.2, which states that "... radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [i.2] may apply to equipment within the scope of the present document. NOTE: A list of such ENs is included on the web site http://www.newapproach.org. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http://docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. SIST EN 300 609-4 V9.2.1:2010

ETSI ETSI EN 300 609-4 V9.2.1 (2010-10) 7 2.1 Normative references The following referenced documents are necessary for the application of the present document. [1] Void. [2] ETSI TS 151 026 (V8.3.0): "Digital cellular telecommunications system (Phase 2+); Base Station System (BSS) equipment specification; Part 4: Repeaters (3GPP TS 51.026 version 8.3.0 Release 8)". [3] ETSI TS 151 021 (V8.7.0): "Digital cellular telecommunications system (Phase 2+); Base Station System (BSS) equipment specification; Radio aspects (3GPP TS 51.021 version 8.7.0 Release 8)". [4] ITU-R Recommendation SM.329-10 (2003): "Unwanted emissions in the spurious domain". [5] ETSI TS 151 010-1 (V8.4.0): "Digital cellular telecommunications system (Phase 2+); Mobile Station (MS) conformance specification; Part 1: Conformance specification (3GPP TS 51.010-1 version 8.4.0 Release 8)". 2.2 Informative references The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. [i.1] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations. [i.2] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (R&TTE Directive). [i.3] ETSI EG 201 399: "Electromagnetic compatibility and Radio spectrum Matters (ERM); A guide to the production of candidate Harmonized Standards for application under the R&TTE Directive". [i.4] ETSI TR 102 215 (V1.3.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM); Recommended approach, and possible limits for measurement uncertainty for the measurement of radiated electromagnetic fields above 1 GHz". [i.5] ETSI TR 100 028 (all parts) (V1.4.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics". [i.6] ETSI TS 145 005 (V8.7.0): "Digital cellular telecommunications system (Phase 2+); Radio Transmission and reception (3GPP TS 45.005 version 8.7.0 Release 8)". 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: broadband repeater: repeater which is designed for operation on any combination of ARFCNs (up to a specified maximum number) within the operating band of the repeater channelized repeater: repeater which is designed for operation on a specified subset of ARFCNs within the operating band of the repeater NOTE: The subset of ARFCNs may be determined during the manufacture of the repeater, or may be programmable. pass band: repeater can have one or several pass bands SIST EN 300 609-4 V9.2.1:2010

ETSI ETSI EN 300 609-4 V9.2.1 (2010-10) 8 repeater: bi-directional Radio Frequency (RF) amplifier which can amplify and transmit a received Mobile Station (MS) signal in the GSM MS transmit band, simultaneously it can amplify and transmit a radiated or conducted received Base Transceiver Station (BTS) RF signal in the GSM BTS transmit band repeater system using frequency shift: repeater system consisting of two different elements, a master unit close to the BTS and at least one remote unit close to the area to be covered NOTE: The master unit amplifies the channels from the BTS and shifts them to different GSM channels. In the remote unit the shifted channels from the master unit will be transferred back to the original channels and amplified. This is valid for the downlink signals as well as for the uplink signals. 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: ARFCN Absolute Radio Frequency Channel Number BTS Base Transceiver Station EVM Error Vector Magnitude MS Mobile Station RF Radio Frequency 4 Technical requirements specifications 4.1 Environmental profile The technical requirements of the present document apply under the environmental profile for operation of the equipment, which shall be declared by the supplier. The equipment shall comply with all the technical requirements of the present document at all times when operating within the boundary limits of the declared operational environmental profile. For guidance on how a supplier can declare the environmental profile, see annex B. 4.2 Conformance requirements 4.2.1 Conducted spurious emissions

4.2.1.1 Definition This test measures the conducted spurious emissions at the antenna ports. 4.2.1.2 Limit This requirement applies to all antenna ports of the repeater, at maximum gain, and with the following input signals: • without any RF input signal; • with a continuous sinusoidal RF signal at a level which will result, when measured, in the maximum rated RF output power per channel, as declared by the manufacturer RF input signal. The measured power shall not exceed: • -36 dBm (250 nW) in the frequency band 9 kHz to 1 GHz; • -30 dBm (1µW) in the frequency band 1 GHz to 12,75 GHz. SIST EN 300 609-4 V9.2.1:2010

ETSI ETSI EN 300 609-4 V9.2.1 (2010-10) 9 Table 4.2.1.2-1: Measurement bandwidth for spurious emissions Band Frequency offset Measurement bandwidth

In the relevant BTS transmit Band or MS transmit band ≥ 100 kHz 3 kHz 100 kHz to 50 MHz - 10 kHz 50 MHz to 500 MHz outside the relevant transmit band (offset from edge of the relevant transmit band)

4.2.1.3 Conformance Conformance tests described in clause 5.3.1 shall be carried out. 4.2.2 Radiated spurious emissions 4.2.2.1 Definition This test measures the effective power of spurious emissions radiated by the cabinet and structure. 4.2.2.2 Limit This requirement applies to all antenna ports of the repeater, at maximum gain, and with the following input signals: • without any RF input signal; • with a continuous sinusoidal RF signal at a level which will result, when measured, in the maximum rated RF output power per channel, as declared by the manufacturer RF input signal. The effective radiated power shall not exceed: • -36 dBm (250 nW) in the frequency band 30 MHz to 1 GHz; • -30 dBm (1µW) in the frequency band 1 GHz to 12,75 GHz. SIST EN 300 609-4 V9.2.1:2010

ETSI ETSI EN 300 609-4 V9.2.1 (2010-10) 10 Table 4.2.2.2-1: Measurement bandwidth for spurious emissions Band Frequency offset Measurement bandwidth

In the relevant BTS transmit Band or MS transmit band ≥ 100 kHz 3 kHz 30 MHz to 50 MHz - 10 kHz 50 MHz to 500 MHz outside the relevant transmit band (offset from edge of the relevant transmit band)

4.2.2.3 Conformance Conformance tests described in clause 5.3.2 shall be carried out. 4.2.3 Intermodulation attenuation 4.2.3.1 Definition To verify that the level of intermodulation products, generated in non-linear elements of the repeater, in the presence of two RF input signals, do not exceed the specified limits. 4.2.3.2 Limit This requirement applies to all antenna ports of the repeater, at maximum gain, and with the following input signals: • with a continuous sinusoidal RF signal at a level which will result, when measured, in the maximum rated RF output power per channel, as declared by the manufacturer RF input signal; • with 10 dB increased continuous sinusoidal RF signals compared to the continuous sinusoidal RF signal at a level which will result, when measured, in the maximum rated RF output power per channel, as declared by the manufacturer RF input signal. The maximum level of intermodulation product shall be not greater than: • -36 dBm (250 nW) in the frequency band 9 kHz to 1 GHz; • -30 dBm (1µW) in the frequency band 1 GHz to 12,75 GHz. 4.2.3.3 Conformance Conformance tests described in clause 5.3.3 shall be carried out. 4.2.4 Out-of-band gain 4.2.4.1 Definition To test the net gain of the repeater outside the relevant MS or BTS transmit band.

This test shall also check the net gain at harmonic frequencies. SIST EN 300 609-4 V9.2.1:2010

ETSI ETSI EN 300 609-4 V9.2.1 (2010-10) 11 4.2.4.2 Limit This requirement applies to all antenna ports of the repeater, at maximum gain. The net gain in both directions through the repeater shall be less than: • 50 dB at 400 kHz offset and greater; • 40 dB at 600 kHz offset and greater; • 35 dB at 1 MHz offset and greater; • 25 dB at 5 MHz offset and greater; from the edges of the relevant MS or BTS transmit bands. 4.2.4.3 Conformance Conformance tests described in clause 5.3.4 shall be carried out. 4.2.5 Frequency error 4.2.5.1 Definition This clause applies only to repeater systems using frequency shift and describes the test of the frequency error. 4.2.5.2 Limit The average frequency error of the repeater system shall not exceed 0,1 ppm. If tested, the average frequency error of a single repeater shall not exceed 0,05 ppm. 4.2.5.3 Conformance Conformance tests described in clause 5.3.5 shall be carried out. 4.2.6 Modulation accuracy at GMSK modulation 4.2.6.1 Definition This clause applies only to repeater systems using frequency shift and describes the test of the phase error. 4.2.6.2 Limit The phase error of a complete repeater system shall not exceed: • 7° rms; • 28° peak. If tested, the phase error of a single repeater unit shall not exceed: • 6,1° rms; • 24,5° peak. 4.2.6.3 Confor