SIST EN 300 113-2 V1.4.2:2010

Harmonized European Standard (Telecommunications series)

Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Land mobile service;
Radio equipment intended for the transmission
of data (and/or speech) using constant or non-constant
envelope modulation and having an antenna connector;
Part 2: Harmonized EN covering essential requirements
of article 3.2 of the R&TTE Directive

2 ETSI EN 300 113-2 V1.4.2 (2009-11)

Reference
REN/ERM-TGDMR-286-2
Keywords
antenna, data, mobile, radio, regulation, speech,
PMR, TDD, TDMA
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2009.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 ETSI EN 300 113-2 V1.4.2 (2009-11)
Contents
Intellectual Property Rights . 5
Foreword . 5
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 7
2.2 Informative references . 7
3 Definitions, symbols and abbreviations . 7
3.1 Definitions . 7
3.2 Symbols . 7
3.3 Abbreviations . 7
4 Technical requirements specifications . 8
4.1 Environmental profile . 8
4.2 Transmitter requirements . 8
4.2.1 Frequency error . 8
4.2.1.1 Definition . 8
4.2.1.2 Limit . 8
4.2.1.3 Conformance . 8
4.2.2 Transmitter power (conducted) . 8
4.2.2.1 Definition . 8
4.2.2.2 Limit . 8
4.2.2.3 Conformance . 8
4.2.3 Maximum effective radiated power . 8
4.2.3.1 Definition . 8
4.2.3.2 Limit . 8
4.2.3.3 Conformance . 8
4.2.4 Adjacent and alternate channel power . 9
4.2.4.1 Definition . 9
4.2.4.2 Limit . 9
4.2.4.3 Conformance . 9
4.2.5 Unwanted emissions in the spurious domain . 9
4.2.5.1 Definition . 9
4.2.5.2 Limit . 9
4.2.5.3 Conformance . 9
4.2.6 Intermodulation attenuation . 9
4.2.6.1 Definition . 9
4.2.6.2 Limit . 9
4.2.6.3 Conformance . 9
4.2.7 Transient frequency behaviour of the transmitter . 9
4.2.7.1 Definition . 9
4.2.7.2 Limit . 9
4.2.7.3 Conformance . 9
4.2.8 Transmitter timeout timer . 10
4.2.8.1 Definition . 10
4.2.8.2 Limit . 10
4.2.8.3 Conformance . 10
4.3 Receiver requirements . 10
4.3.1 Maximum usable receiver sensitivity . 10
4.3.1.1 Definition . 10
4.3.1.2 Limit . 10
4.3.1.3 Conformance . 10
4.3.2 Co-channel rejection . 10
4.3.2.1 Definition . 10
4.3.2.2 Limit . 10
ETSI
4 ETSI EN 300 113-2 V1.4.2 (2009-11)
4.3.2.3 Conformance . 10
4.3.3 Adjacent channel selectivity . 11
4.3.3.1 Definition . 11
4.3.3.2 Limit . 11
4.3.3.3 Conformance . 11
4.3.4 Spurious response rejection . 11
4.3.4.1 Definition . 11
4.3.4.2 Limit . 11
4.3.4.3 Conformance . 11
4.3.5 Intermodulation response rejection . 11
4.3.5.1 Definition . 11
4.3.5.2 Limit . 11
4.3.5.3 Conformance . 11
4.3.6 Blocking or desensitization . 11
4.3.6.1 Definition . 11
4.3.6.2 Limit . 12
4.3.6.3 Conformance . 12
4.3.7 Spurious radiations . 12
4.3.7.1 Definition . 12
4.3.7.2 Limit . 12
4.3.7.3 Conformance . 12
5 Testing for compliance with technical requirements . 12
5.1 Environmental conditions for testing . 12
5.1.1 Normal and extreme test-conditions . 12
5.1.2 Test power source . 12
5.1.3 Choice of samples for test suites . 12
5.2 Interpretation of the measurement results . 12
5.3 Essential radio test suites . 13
5.3.1 Frequency error . 13
5.3.2 Transmitter power (conducted) . 13
5.3.3 Maximum effective radiated power . 13
5.3.4 Adjacent and alternate channel power . 13
5.3.5 Unwanted emissions in the spurious domain . 13
5.3.6 Intermodulation attenuation . 13
5.3.7 Transient frequency behaviour of the transmitter . 13
5.3.8 Receiver Spurious radiations . 13
5.4 Other radio test suites . 14
5.4.1 Maximum usable receiver sensitivity . 14
5.4.2 Co-channel rejection . 14
5.4.3 Adjacent channel selectivity . 14
5.4.4 Spurious response rejection . 14
5.4.5 Intermodulation response rejection . 14
5.4.6 Receiver blocking or desensitization . 14
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 15
Annex B (informative): The EN title in the official languages . 17
Annex C (informative): Bibliography . 18
History . 19

ETSI
5 ETSI EN 300 113-2 V1.4.2 (2009-11)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [i.2] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [i.1] of the European Parliament
and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
Technical specifications relevant to Directive 1999/5/EC [i.1] are given in annex A.
The present document is part 2 of a multi-part deliverable covering the Electromagnetic compatibility and Radio
spectrum Matters (ERM); Land mobile service; Radio equipment intended for the transmission of data (and/or speech)
using constant or non-constant envelope modulation and having an antenna connector, as identified below:
Part 1: "Technical characteristics and methods of measurement";
Part 2: "Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive".

Proposed national transposition dates
Date of latest announcement of this EN (doa): 28 February 2010
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 August 2010
Date of withdrawal of any conflicting National Standard (dow): 31 August 2011

Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive. The modular
structure is shown in EG 201 399 [i.3].
ETSI
6 ETSI EN 300 113-2 V1.4.2 (2009-11)
1 Scope
The present document covers the technical requirements for radio transmitters and receivers used in stations in the
Private Mobile Radio (PMR) service.
It applies to use in the land mobile service, operating on radio frequencies in all or in any part of the frequencies as
given below, with channel separations of 12,5 kHz, 20 kHz and 25 kHz, intended for speech and/or data.
Table 1: Radiocommunications service frequency bands
Radiocommunications service frequency bands
Transmit 30 MHz to 1 000 MHz
Receive 30 MHz to 1 000 MHz
It applies to equipment for continuous and/or discontinuous transmission of data and/or digital speech.
The equipment comprises a transmitter and associated encoder and modulator and/or a receiver and associated
demodulator and decoder. The types of equipment covered by the present document are as follows:
• base station (equipment fitted with an antenna connector, intended for use in a fixed location);
• mobile station (equipment fitted with an antenna connector, normally used in a vehicle or as a transportable);
• and those hand portable stations:
a) fitted with an antenna socket; or
b) without an external antenna socket, but fitted with a permanent internal or a temporary internal 50 Ω
Radio Frequency (RF) connector which allows access to the transmitter output and the receiver input.
Hand
...