SIST EN ISO 13337:2012
(Main)Spring-type straight pins - Slotted, light duty (ISO 13337:2009)
Spring-type straight pins - Slotted, light duty (ISO 13337:2009)
ISO 13337:2009 specifies the characteristics of slotted spring-type straight pins, made of steel or of austenitic or martensitic stainless steel, light duty, with nominal diameter from 2 mm to 50 mm inclusive.
Spannstifte (-hülsen) - Geschlitzt, leichte Ausführung (ISO 13337:2009)
Diese Internationale Norm legt die Eigenschaften von geschlitzten Spannstiften ( hülsen) aus Stahl oder aus austenitischem bzw. martensitischem nichtrostenden Stahl in leichter Ausführung mit einem Nenndurch-messer d1 von 2 mm bis einschließlich 50 mm fest.
ANMERKUNG Die Nenndurchmesser wurden so gewählt, dass die Spannstifte ineinander geschoben oder mit Spann¬stiften in schwerer Ausführung nach ISO 8752 verbunden werden können.
Goupilles cylindriques creuses, dites goupilles élastiques - Série mince (ISO 13337:2009)
L'ISO 13337:2009 spécifie les caractéristiques des goupilles cylindriques creuses, dites goupilles élastiques, en acier ou en acier inoxydable austénitique ou martensitique, série mince, de diamètre nominal compris entre 2 mm et 50 mm inclus.
Valjasto zviti vzmetni zatiči - Lahka izvedba (ISO 13337:2009)
Ta mednarodni standard določa značilnosti valjasto zvitih vzmetnih zatičev, izdelanih iz jekla ali iz avstenitnega ali martenzitnega nerjavečega jekla, lahke izvedbe, z nominalnim premerom, d1, od 2 mm do vključno 50 mm.
General Information
- Status
- Published
- Public Enquiry End Date
- 19-Mar-2008
- Publication Date
- 27-Nov-2011
- Technical Committee
- ISEL - Mechanical elements
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 24-Nov-2011
- Due Date
- 29-Jan-2012
- Completion Date
- 28-Nov-2011
Relations
- Effective Date
- 01-Jan-2012
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Overview
SIST EN ISO 13337:2012 establishes the standardized requirements for slotted spring-type straight pins - light duty. These mechanical fasteners are made from steel, austenitic, or martensitic stainless steel and are designed with a nominal diameter ranging from 2 mm to 50 mm. Developed by CEN and ISO Technical Committees focusing on fasteners, this international standard ensures consistent quality, interchangeability, and reliability for light duty applications. The document provides comprehensive guidelines on material selection, dimensions, performance characteristics, and acceptance criteria for these pins.
Key Topics
- Scope: Specifies slotted, spring-type straight pins for light-duty use, with coverage of nominal diameters from 2 mm to 50 mm.
- Material Specification: Covers requirements for plain carbon steel, silicon manganese steel, and both austenitic and martensitic stainless steels.
- Dimensions and Tolerances: Details pin diameters, lengths, slot dimensions, and tolerance classes for hole size (H12).
- Performance Criteria:
- Hardness requirements.
- Shear strength testing (in accordance with ISO 8749).
- Surface finish and treatment, including guidance to avoid hydrogen embrittlement.
- Manufacturing Quality: Pins must be free of burrs, irregularities, and surface defects, delivered in a natural finish unless otherwise agreed.
- Designation System: Standardized approach for identifying slotted spring-type pins, e.g.,
Spring pin ISO 13337-6×30-St.
Applications
Slotted, light-duty spring-type straight pins described in SIST EN ISO 13337:2012 are widely used in industries where precise positioning, alignment, and joining of components are required, but shear loads are moderate. Typical sectors and applications include:
- Automotive manufacturing - Alignment and securing of panels, covers, and lightweight assemblies.
- Machinery and equipment - Locating and retaining components subjected to vibration or light shear forces.
- Furniture production - Concealed joinery and assembly fixtures.
- Consumer electronics and appliances - Internal positioning of parts with minimal tool accessibility.
- Maintenance and repair - Replacement parts for standardized assemblies.
The use of standardized pins ensures compatibility, ease of replacement, and reliability in assembly operations across global supply chains. Fitment guidance provided ensures correct hole sizing and installation to guarantee functionality.
Related Standards
Several international standards complement SIST EN ISO 13337:2012 for comprehensive fastener selection and application:
- ISO 8752 - Spring-type straight pins - Slotted, heavy duty (for higher load capacities).
- ISO 3269 - Fasteners – Acceptance inspection (ensures conformance with quality requirements).
- ISO 4042 - Fasteners – Electroplated coatings (surface treatment and protection guidelines).
- ISO 6507-1 - Metallic materials – Vickers hardness test – Part 1: Test method (hardness verification).
- ISO 8749 - Pins and grooved pins – Shear test (test method for mechanical strength).
Referencing these related standards ensures all aspects of slotted spring pin selection, performance, and quality assurance are addressed for optimal usage and compliance with international norms.
Optimize your fastener selection and manufacturing processes by adhering to SIST EN ISO 13337:2012 for slotted, light-duty spring-type straight pins, ensuring interchangeability, safety, and global standardization.
Frequently Asked Questions
SIST EN ISO 13337:2012 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Spring-type straight pins - Slotted, light duty (ISO 13337:2009)". This standard covers: ISO 13337:2009 specifies the characteristics of slotted spring-type straight pins, made of steel or of austenitic or martensitic stainless steel, light duty, with nominal diameter from 2 mm to 50 mm inclusive.
ISO 13337:2009 specifies the characteristics of slotted spring-type straight pins, made of steel or of austenitic or martensitic stainless steel, light duty, with nominal diameter from 2 mm to 50 mm inclusive.
SIST EN ISO 13337:2012 is classified under the following ICS (International Classification for Standards) categories: 21.060.50 - Pins, nails. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN ISO 13337:2012 has the following relationships with other standards: It is inter standard links to SIST EN ISO 13337:2001, SIST EN 1337-2:2004, SIST EN 2589:2017, SIST EN 474-5:2007+A2:2012. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN ISO 13337:2012 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Spannstifte (-hülsen) - Geschlitzt, leichte Ausführung (ISO 13337:2009)Goupilles cylindriques creuses, dites goupilles élastiques - Série mince (ISO 13337:2009)Spring-type straight pins - Slotted, light duty (ISO 13337:2009)21.060.50Pins, nailsICS:Ta slovenski standard je istoveten z:EN ISO 13337:2009SIST EN ISO 13337:2012en,fr,de01-januar-2012SIST EN ISO 13337:2012SLOVENSKI
STANDARDSIST EN ISO 13337:20011DGRPHãþD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 13337June 2009ICS 21.060.50Supersedes EN ISO 13337:1997
English VersionSpring-type straight pins - Slotted, light duty (ISO 13337:2009)Goupilles cylindriques creuses, dites goupilles élastiques -Série mince (ISO 13337:2009)Spannstifte (-hülsen) - Geschlitzt, leichte Ausführung (ISO13337:2009)This European Standard was approved by CEN on 6 June 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 13337:2009: ESIST EN ISO 13337:2012
Reference numberISO 13337:2009(E)© ISO 2009
INTERNATIONAL STANDARD ISO13337Second edition2009-06-15Spring-type straight pins — Slotted, light duty Goupilles cylindriques creuses, dites goupilles élastiques — Série mince
ISO 13337:2009(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe’s licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe’s licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
©
ISO 2009 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii © ISO 2009 – All rights reserved
ISO 13337:2009(E) © ISO 2009 – All rights reserved iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 13337 was prepared by Technica
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...