SIST EN ISO 10545-11:1998
(Main)Ceramic tiles - Part 11: Determination of crazing resistance for glazed tiles (ISO 10545-11:1994)
Ceramic tiles - Part 11: Determination of crazing resistance for glazed tiles (ISO 10545-11:1994)
Defines a test method for determining the crazing resistance of all glazed ceramic tiles except when the crazing is an inherent decorative feature of the product.
Keramische Fliesen und Platten - Teil 11: Bestimmung der Widerstandsfähigkeit gegen Glasurrisse glasierter Fliesen und Platten (ISO 10545-11:1994)
Dieser Teil von ISO 10545 legt ein Prüfverfahren zur Bestimmung des Widerstandes gegen Glasurrisse für alle glasierten keramischen Fliesen und Platten fest, es sei denn, die Glasurrisse sind eine Eigentümlichkeit des Erzeugnisses. Anmerkung 1: ISO 13006: - Keramische Fliesen und Platten - Definitionen, Klassifizierung, Eigenschaften und Kennzeichnung (in Vorbereitung) enthält Anforderungen an die Eigenschaften von Fliesen und Platten und andere nützliche Informationen über diese Erzeugnisse.
Carreaux et dalles céramiques - Partie 11: Détermination de la résistance au tressaillage pour les carreaux émaillés (ISO 10545-11:1994)
La présente partie de l'ISO 10545 prescrit une méthode pour la détermination de la résistance au tressaillage pour tous les carreaux céramiques émaillés, sauf si le tressaillage est une caractéristique inhérente au produit.
NOTE 1 L'ISO 13006:--, Carreaux et dalles céramiques -- Définitions, classification, caractéristiques et marquage (à publier), prescrit les exigences requises pour les propriétés des carreaux et dalles céramiques et fournit d'autres informations utiles sur ces produits.
Keramične ploščice - 11. del: Ugotavljanje odpornosti lošča loščenih ploščic proti lasastim razpokam
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 10545-11:1998
01-april-1998
.HUDPLþQHSORãþLFHGHO 8JRWDYOMDQMHRGSRUQRVWLORãþDORãþHQLKSORãþLFSURWL
ODVDVWLPUD]SRNDP
Ceramic tiles - Part 11: Determination of crazing resistance for glazed tiles (ISO 10545-
11:1994)
Keramische Fliesen und Platten - Teil 11: Bestimmung der Widerstandsfähigkeit gegen
Glasurrisse glasierter Fliesen und Platten (ISO 10545-11:1994)
Carreaux et dalles céramiques - Partie 11: Détermination de la résistance au tressaillage
pour les carreaux émaillés (ISO 10545-11:1994)
Ta slovenski standard je istoveten z: EN ISO 10545-11:1996
ICS:
91.100.23 .HUDPLþQHSORãþLFH Ceramic tiles
SIST EN ISO 10545-11:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 10545-11:1998
---------------------- Page: 2 ----------------------
SIST EN ISO 10545-11:1998
---------------------- Page: 3 ----------------------
SIST EN ISO 10545-11:1998
---------------------- Page: 4 ----------------------
SIST EN ISO 10545-11:1998
INTERNATIONAL IS0
STANDARD 10545-l 1
First edition
1994-08-15
Ceramic tiles -
Part 11:
Determination of crazing resistance for glazed
tiles
Carreaux et dales cbramiques -
Partie 11: D&termination de la r&stance au tressaillage pour /es carreaux
6maiMs
Reference number
IS0 10545-11:1994(E)
---------------------- Page: 5 ----------------------
SIST EN ISO 10545-11:1998
IS0 10545-11:1994(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work
of preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an lnternationai
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard IS0 10545-I 1 was prepared by Tech
tee ISO/TC 189, Ceramic tile.
IS0 10545 consists of the following parts, under the genera
tiles:
- Part I: Sampling and basis for acceptance
- Part 2: Determination of dimensions and surface quality
- Part 3: Determination of water absorption, apparent porosity, appar-
ent relative density and bulk density
- Part 4: Determination of modulus of rupture and breaking strength
- Part 5: Determination of impact resistance by measurement of co-
efficient of restitution
- Part 6: Determination of resistance to deep abrasion for unglazed
tiles
- Part 7: Determination of resistance to surface abrasion for glazed
tiles
- Pit-t 8: Determination of linear thermal expansion
0 IS0 1994
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1211 Geneve 20 l Switzerland
Printed in Switzerland
---------------------- Page: 6 ----------------------
SIST EN ISO 10545-11:1998
Q IS0 IS0 10545-I 1:1994(E)
- Part 9: Determination of resistance to thermal shock
- Part 10: Determination of moisture expansion
A Part 11: Determination of crazing resistance for glazed tiles
- Part 12: Determination of frost resistance
- Part 13: Determination of chemical resistance
- Part 14: Determination of resistance to stains
- Part 15: Extraction of lead and cadmium from glazed tiles
- Part 16: Determination of co/our differences
- Part 17: Determination
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.