Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Plate - 6 mm < a ≤ 100 mm

This European Standard specifies the requirements relating to: Titanium alloy Ti-6Al-4V Annealed Plate 6 mm < a ≤ 100 mm for aerospace applications.

Luft- und Raumfahrt - Titanlegierung TI-P64001 (Ti-6Al-4V) - Geglüht - Platten - 6 mm < a ≤ 100 mm

Diese Norm legt die Anforderungen an
Titanlegierung Ti 6Al-4V
Geglüht
Platten
6 mm  a  100 mm
für die Anwendung in der Luft  und Raumfahrt fest.

Série aérospatiale - Alliage de titane TI-P64001 (Ti-6Al-4V) - Recuit - Plaques - 6 mm < a ≤ 100 mm

La présente norme spécifie les exigences relatives à :
Alliage de titane Ti-6Al-4V
Recuit
Plaques
6 mm  a  100 mm
pour les applications aérospatiales

Aeronavtika - Titanova zlitina TI-P64001 (Ti-6Al-4V) - Žarjeno - Plošče - 6 mm < a ≤ 100 mm

Ta evropski standard določa zahteve glede: titanove zlitine Ti-6Al-4V; žarjena; plošče 6 mm < a ≤ 100 mm; za uporabo v aeronavtiki.

General Information

Status
Published
Publication Date
10-Sep-2012
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
03-Sep-2012
Due Date
08-Nov-2012
Completion Date
11-Sep-2012

Relations

Buy Standard

Standard
EN 3464:2012
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.49.025.30TitanTitaniumICS:Ta slovenski standard je istoveten z:EN 3464:2012SIST EN 3464:2012en,fr,de01-oktober-2012SIST EN 3464:2012SLOVENSKI
STANDARDSIST EN 3464:20101DGRPHãþD



SIST EN 3464:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3464
August 2012 ICS 49.025.30 Supersedes EN 3464:2009English Version
Aerospace series - Titanium alloy Ti-6Al-4V - Annealed - Plate -6 mm < a ≤ 100 mm
Série aérospatiale - Alliage de titane Ti-6Al-4V - Recuit - Plaques - 6 mm < a ≤ 100 mm
Luft- und Raumfahrt - Titanlegierung Ti-6Al-4V - Geglüht - Platten - 6 mm < a ≤ 100 mm This European Standard was approved by CEN on 23 March 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3464:2012: ESIST EN 3464:2012



EN 3464:2012 (E) 2 Contents Page Foreword .3Introduction .31 Scope .42 Normative references .4 SIST EN 3464:2012



EN 3464:2012 (E) 3 Foreword This document (EN 3464:2012) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This document supersedes EN 3464:2009. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2013, and conflicting national standards shall be withdrawn at the latest by February 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Introduction This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.