SIST EN ISO 10750:2018

SLOVENSKI STANDARD
SIST EN ISO 10750:2018
01-november-2018
2EXWHY3UHVNXVQDPHWRGD]D]DGUJH7UGQRVWSULWUGLWYHNRQþQLNRYSUL]DGUJL
,62
Footwear - Test method for slide fasteners - Attachment strength of end stops (ISO
10750:2015)
Schuhe - Prüfverfahren für Reißverschlüsse - Bindungsfestigkeit von unteren
Begrenzungsteilen (ISO 10750:2015)
Chaussures - Méthode d'essai pour les fermetures à glissière - Résistance
d'attachement des extrémités (ISO 10750:2015)
Ta slovenski standard je istoveten z: EN ISO 10750:2018
ICS:
61.040 3RNULYDOD'RGDWNLN Headgear. Clothing
REODþLORP6SHQMDQMHREODþLO accessories. Fastening of
clothing
61.060 Obuvala Footwear
SIST EN ISO 10750:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10750:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 10750:2018


EN ISO 10750
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2018
EUROPÄISCHE NORM
ICS 61.060
English Version

Footwear - Test method for slide fasteners - Attachment
strength of end stops (ISO 10750:2015)
Chaussures - Méthode d'essai pour les fermetures à Schuhe - Prüfverfahren für Reißverschlüsse -
glissière - Résistance d'attachement des extrémités Abzugfestigkeit von Begrenzungsteilen (ISO
(ISO 10750:2015) 10750:2015)
This European Standard was approved by CEN on 15 July 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10750:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10750:2018
EN ISO 10750:2018 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 10750:2018
EN ISO 10750:2018 (E)
European foreword
The text of ISO 10750:2015 has been prepared by Technical Committee ISO/TC 216 "Footwear” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 10750:2018 by
Technical Committee CEN/TC 309 “Footwear” the secretariat of which is held by UNE.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2019, and conflicting national standards shall
be withdrawn at the latest by March 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10750:2015 has been approved by CEN as EN ISO 10750:2018 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 10750:2018

---------------------- Page: 6 ----------------------

SIST EN ISO 10750:2018
INTERNATIONAL ISO
STANDARD 10750
First edition
2015-06-15
Footwear — Test method for slide
fasteners — Attachment strength of
end stops
Chaussures — Méthode d’essai pour les fermetures à glissière —
Résistance d’attachement des extrémités
Reference number
ISO 10750:2015(E)
©
ISO 2015

---------------------- Page: 7 ----------------------

SIST EN ISO 10750:2018
ISO 10750:2015(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 10750:2018
ISO 10750:2015(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 3
4.1 General . 3
4.2 Method 1 — Top stop attachment strength . 3
4.3 Method 2 — Bottom stop attachment strength (Slider-stringer method) . 3
4.4 Method 3 — Bottom stop attachment strength (Stringer-stringer method) . 3
5 Apparatus and materials. 4
6 Test specimens. 5
7 Procedure. 5
7.1 Method 1 — Top stop attachment strength . 5
7.2 Method 2 — Bottom stop attachment strength (Stringer-slider method) . 6
7.3 Method 3 — Bottom stop attachment strength (Stringer-stringer method) . 6
8 Test report . 7
Bibliography . 8
© ISO 2015 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 10750:2018
ISO 10750:2015(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1.
...