SIST EN ISO 10764:2016
(Main)Footwear - Test methods for slide fasteners - Lateral strength (ISO 10764:2016)
Footwear - Test methods for slide fasteners - Lateral strength (ISO 10764:2016)
This standard describes a method intended to assess the lateral strength of a closed slide fastener for footwear. The method is applicable to all types of slide fastener.
Schuhe - Prüfverfahren für Reißverschlüsse - Laterale Festigkeit (ISO 10764:2016)
Diese Norm beschreibt ein Verfahren zur Beurteilung der lateralen Festigkeit eines geschlossenen Reißverschlusses für Schuhe. Das Verfahren gilt für sämtliche Arten von Reißverschlüssen.
Chaussures - Méthodes d'essai pour les fermetures éclair - Résistance latérale (ISO 10764:2016)
ISO 10764:2016 décrit une méthode permettant d'évaluer la résistance latérale des fermetures à glissière fermées pour chaussures. Cette méthode s'applique à tous les types de fermetures à glissière.
Obutev - Preskusne metode za zadrge - Stranska trdnost (ISO 10764:2016)
Ta standard opisuje preskusno metodo za oceno stranske trdnosti zaprte zadrge pri obutvi. Ta metoda se uporablja se za vse vrste zadrg.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 10764:2016
01-julij-2016
Obutev - Preskusne metode za zadrge - Stranska trdnost (ISO 10764:2016)
Footwear - Test methods for slide fasteners - Lateral strength (ISO 10764:2016)
Schuhe - Prüfverfahren für Reißverschlüsse - Laterale Festigkeit (ISO 10764:2016)
Chaussures - Méthodes d'essai pour les fermetures éclair - Résistance latérale (ISO
10764:2016)
Ta slovenski standard je istoveten z: EN ISO 10764:2016
ICS:
61.040 3RNULYDOD'RGDWNLN Headgear. Clothing
REODþLORP6SHQMDQMHREODþLO accessories. Fastening of
clothing
61.060 Obuvala Footwear
SIST EN ISO 10764:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 10764:2016
---------------------- Page: 2 ----------------------
SIST EN ISO 10764:2016
EN ISO 10764
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2016
EUROPÄISCHE NORM
ICS 61.060
English Version
Footwear - Test methods for slide fasteners - Lateral
strength (ISO 10764:2016)
Chaussures - Méthodes d'essai des fermetures à Schuhe - Prüfverfahren für Reißverschlüsse - Laterale
glissières - Résistance latérale (ISO 10764:2016) Festigkeit (ISO 10764:2016)
This European Standard was approved by CEN on 15 April 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10764:2016 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 10764:2016
EN ISO 10764:2016 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 10764:2016
EN ISO 10764:2016 (E)
European foreword
This document (EN ISO 10764:2016) has been prepared by Technical Committee CEN/TC 309
“Footwear” the secretariat of which is held by AENOR, in collaboration with Technical Committee
ISO/TC 216 “Footwear”.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2016, and conflicting national standards
shall be withdrawn at the latest by November 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10764:2016 has been approved by CEN as EN ISO 10764:2016 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 10764:2016
---------------------- Page: 6 ----------------------
SIST EN ISO 10764:2016
INTERNATIONAL ISO
STANDARD 10764
First edition
2016-05-01
Footwear — Test methods for slide
fasteners — Lateral strength
Chaussures — Méthodes d’essai des fermetures à glissières —
Résistance latérale
Reference number
ISO 10764:2016(E)
©
ISO 2016
---------------------- Page: 7 ----------------------
SIST EN ISO 10764:2016
ISO 10764:2016(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 10764:2016
ISO 10764:2016(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Apparatus and materials. 3
5 Preparation of test specimens . 3
6 Procedure. 3
7 Test report . 4
© ISO 2016 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 10764:2016
ISO 10764:2016(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accor
...
SLOVENSKI STANDARD
kSIST prEN ISO 10764:2016
01-marec-2016
Obutev - Preskusne metode za zadrge - Stranska trdnost (ISO/FDIS 10764:2015)
Footwear - Test methods for slide fasteners - Lateral strength (ISO/FDIS 10764:2015)
Schuhe - Prüfverfahren für Reißverschlüsse - Laterale Festigkeit (ISO/FDIS 10764:2015)
Chaussures - Méthodes d'essai pour les fermetures éclair - Résistance latérale
(ISO/FDIS 10764:2015)
Ta slovenski standard je istoveten z: prEN ISO 10764
ICS:
61.040 3RNULYDOD'RGDWNLN Headgear. Clothing
REODþLORP6SHQMDQMHREODþLO accessories. Fastening of
clothing
61.060 Obuvala Footwear
kSIST prEN ISO 10764:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
kSIST prEN ISO 10764:2016
---------------------- Page: 2 ----------------------
kSIST prEN ISO 10764:2016
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 10764
ISO/TC 216
Footwear — Test methods for slide
Secretariat: AENOR
fasteners — Lateral strength
Voting begins on:
201601 14
Chaussures — Méthodes d’essai pour les fermetures éclair —
Résistance latérale
Voting terminates on:
201603 14
Please see the administrative notes on page iii
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
ISO/FDIS 10764:2015(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN
DARDS TO WHICH REFERENCE MAY BE MADE IN
©
NATIONAL REGULATIONS. ISO 2015
---------------------- Page: 3 ----------------------
kSIST prEN ISO 10764:2016
ISO/FDIS 10764:2015(E)
ISO/CEN PARALLEL PROCESSING
This final draft has been developed within the European Committee for Standardization (CEN), and processed
under the CEN-lead mode of collaboration as defined in the Vienna Agreement. The final draft was established
on the basis of comments received during a parallel enquiry on the draft.
This final draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel two-
month approval vote in ISO and two month formal vote in CEN.
Positive votes shall not be accompanied by comments.
Negative votes shall be accompanied by the relevant technical reasons.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved
---------------------- Page: 4 ----------------------
kSIST prEN ISO 10764:2016
ISO/FDIS 10764:2015(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Apparatus and materials. 3
5 Preparation of test specimens . 3
6 Procedure. 3
7 Test report . 4
Bibliography . 6
© ISO 2015 – All rights reserved iii
---------------------- Page: 5 ----------------------
kSIST prEN ISO 10764:2016
ISO/FDIS 10764:2015(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
ISO 10764 was prepared by the European Committee Standardization (CEN) Technical Committee
CEN/TC 309, Footwear, in collaboration with ISO Technical Committee TC 216, Footwear, in accordance
with the agreement on technical cooperation between ISO and CEN (Vienna Agreement).
iv © ISO 2015 – All rights reserved
---------------------- Page: 6 ----------------------
kSIST prEN ISO 10764
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.