SIST EN 61754-24:2010

SLOVENSKI STANDARD
01-marec-2010
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH9PHVQLNL]DRSWLþQHNRQHNWRUMH
GHO6NXSLQDNRQHNWRUMHYWLSD6&5-,(&
Fibre optic interconnecting devices and passive components - Fibre optic connector
interfaces - Part 24: Type SC-RJ connector family (IEC 61754-24:2009)
Steckgesichter von Lichtwellenleiter-Steckverbindern - Teil 24: Steckverbinderfamilie der
Bauart SC-RJ (IEC 61754-24:2009)
Dispositifs d’interconnexion et composants passifs à fibres optiques - Interfaces de
connecteurs pour fibres optiques - Partie 24: Famille de connecteurs de type SC-RJ (CEI
61754-24:2009)
Ta slovenski standard je istoveten z: EN 61754-24:2010
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61754-24
NORME EUROPÉENNE
January 2010
EUROPÄISCHE NORM
ICS 33.180.20
English version
Fibre optic interconnecting devices and passive components -
Fibre optic connector interfaces -
Part 24: Type SC-RJ connector family
(IEC 61754-24:2009)
Dispositifs d’interconnexion  Lichtwellenleiter -
et composants passifs à fibres optiques - Verbindungselemente
Interfaces de connecteurs und passive Bauteile -
pour fibres optiques - Steckgesichter von Lichtwellenleiter-
Partie 24: Famille de connecteurs Steckverbindern -
de type SC-RJ Teil 24: Steckverbinderfamilie
(CEI 61754-24:2009) der Bauart SC-RJ
(IEC 61754-24:2009)
This European Standard was approved by CENELEC on 2009-12-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels

© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61754-24:2010 E
Foreword
The text of document 86B/2884/FDIS, future edition 1 of IEC 61754-24, prepared by SC 86B, Fibre optic
interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61754-24 on 2009-12-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-12-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61754-24:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60793-2-30 NOTE  Harmonized as EN 60793-2-30 (not modified).
IEC 60793-2-40 NOTE  Harmonized as EN 60793-2-40 (not modified).
IEC 61753 NOTE  Harmonized in EN 61753 series (not modified).
IEC 61754-1 NOTE  Harmonized as EN 61754-1 (not modified).
IEC 61755-1 NOTE  Harmonized as EN 61755-1 (not modified).
ISO 5456-2 NOTE  Harmonized as EN ISO 5456-2 (not modified).
__________
- 3 - EN 61754-24:2010
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60603-7-1 - Connectors for electronic equipment - EN 60603-7-1 -
Part 7-1: Detail specification for 8-way,
shielded free and fixed connectors

IEC 61076-3-106 - Connectors for electronic equipment - EN 61076-3-106 -
Product requirements -
Part 3-106: Rectangular connectors - Detail
specification for protective housings for use
with 8-way shielded and unshielded
connectors for industrial environments
incorporating the IEC 60603-7 series interface

IEC 61754-4 - Fibre optic connector interfaces - EN 61754-4 -
Part 4: Type SC connector family

IEC 61754-24 ®
Edition 1.0 2009-09
INTERNATIONAL
STANDARD
Fibre optic interconnecting devices and passive components – Fibre optic
connector interfaces –
Part 24: Type SC-RJ connector family

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
U
ICS 33.180.20 ISBN 2-8318-1062-8
– 2 – 61754-24 © IEC:2009(E)
CONTENTS
FOREWORD.4
INTRODUCTION.6
1 Scope.7
2 Normative references .7
3 Description .7
4 Interfaces .7
4.1 General .7
4.2 Plug connector interface PC .9
4.3 Plug connector interface APC 8° .12
4.4 Plug connector interface for A3c/A3d fibre.15
4.5 Plug connector interface for A4a*/A4d fibres .17
4.6 Adaptor connector interface .19
4.7 Active device interface .21
Annex A (normative) Colour / mechanical coding system .24
Annex B (normative) Cut out information.27
Bibliography.28

Figure 1 – Plug connector interface PC (SM fibre) .9
Figure 2 – Detail of spherically polished ferrule PC endface.11
Figure 3 – Plug connector interface APC 8° (SM fibre).12
Figure 4 – Detail of angled polished ferrule endface (APC) .14
Figure 5 – Plug connector interface for A3c/A3d fibre (HCS fibre type) .15
Figure 6 – Plug connector interface for A4a*/A4d fibres (POF).17
Figure 7 – Adaptor connector interface .19
Figure 8 – Active device interface .21
Figure 9 – Pin gauge for resilient alignment sleeve .23
Figure A.1 – Mechanical coding location with pin and clip .24
Figure A.2 – Mechanical disposition of the keys (pin and clip).25
Figure B.1 – Panel cut out information; mounting hole Ø 2,3, or groove for M2 .27

Table 1 – Title of the standard interfaces .8
Table 2 – Interchangeability.8
Table 3 – Dimensions of plug connector interface PC (SM fibre) .10
Table 4 – Dimensions of the spherically polished ferrule PC endface.11
Table 5 – Ferrule grades.11
Table 6 – Dimensions of plug connector interface APC 8° (SM fibre) .13
Table 7 – Dimensions of the angled polished ferrule endface (APC) .14
Table 8 – Ferrule grades.14
Table 9 – Dimensions of plug connector interface for A3c/A3d fibres .16
Table 10 – Ferrule grades.16
Table 11 – Dimensions of plug connector interface for A4a*/A4d fibres (POF) .18
Table 12 – Ferrule grade .18

61754-24 © IEC:2009(E) – 3 –
Table 13 – Dimensions of adaptor connector interface.20
Table 14 – Dimensions of active device interface.22
Table 15 – Dimensions of pin gauge .23
Table A.1 – Basic colours of the housing .24
Table A.2 – Coloured code of mechanical pin (key; adaptor) and clip (frame;
connector) .24
Table A.3 – Mechanical disposition of the keys (pin and clip).26
Table B.1 – Dimensions for mounting the fixed adaptor .27

– 4 – 61754-24 © IEC:2009(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
FIBRE OPTIC CONNECTOR INTERFACES –

Part 24: Type SC-RJ connector family

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
International Standard IEC 61754-24 has been prepared by subcommittee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
The text of this standard is based on the following documents:
FDIS Report on voting
86B/2884/FDIS 86B/2919/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 61754 series, published under the general title: Fibre optic
interconnecting devices and passive components – Fibre optic connector interfaces, can be found on
the IEC website.
61754-24 © IEC:2009(E) – 5 –
Future standards in this series will carry the new general title as cited above. Titles of existing
standards in this series will be updated at the time of the next edition.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

– 6 – 61754-24 © IEC:2009(E)
INTRODUCTION
Attention is drawn to the possibility that some of the elements of this document may be the
subject of patent rights. IEC shall not be held responsible for identifying any or all such patent
rights.
The International Electrotechnical Commission (IEC) draws attention to the fact that it is
claimed that compliance with this document may involve the use of a patent concerning a plug
connector interface, adaptor connector interface and active connector interface given in
Clause 4.
IEC takes no position concerning the evidence, validity and scope of this patent right.
The holder of this patent right has assured the IEC that he/she is willing to negotiate licences
under reasonable and non-discriminatory terms and conditions with applicants throughout the
world. In this respect, the statement of the holder of this patent right is registered with IEC.
Information may be obtained from:
Reichle & De-Massari AG, Dept. of Standardization & Patent, Binzstrasse 31 CH-8622
Wetzikon ZH, Switzerland
Attention is drawn to the possibility that some of the elements of this document may be the
subject of patent rights other than those identified above. IEC shall not be held responsible for
identifying any or all such patent rights.

61754-24 © IEC:2009(E) – 7 –
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
FIBRE OPTIC CONNECTOR INTERFACES –

Part 24: Type SC-RJ connector family

1 Scope
This part of IEC 61754 defines the standard interface dimensions for the type SC-RJ family of
connectors.
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (incl
...