SIST EN 15534-6:2015/oprA1:2017
(Amendment)Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements
Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements
This part of EN 15534 specifies the characteristics of fencing profiles and elements made from cellulose-based materials and thermoplastics, usually called wood-polymer composites (WPC) or natural fibre composites (NFC).
It is applicable to fencing profiles and elements for non-structural fencing systems.
The security systems, perimeter protections, handrails and load bearing applications are out of the scope of this part of EN 15534.
Any systems made from profiles in the scope of this part of EN 15534 that are affected by regulations are under the responsibility of the system supplier.
EN 15534 1 specifies some of the test methods relevant to this part of EN 15534.
NOTE For editorial reasons, in EN 15534 the abbreviation “WPC” is used for “composites made from cellulose-based materials and thermoplastics”.
Verbundwerkstoffe aus cellulosehaltigen Materialien und Thermoplasten (üblicherweise Holz-Polymer-Werkstoffe (WPC) oder Naturfaserverbundwerkstoffe (NFC) genannt) - Teil 6: Anforderungen an Zaunprofile und -elemente
Composites à base de matières cellulosiques et de thermoplastiques (communément appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle (NFC)) - Partie 6 : Spécifications relatives aux profiles et éléments pour clôture
Kompoziti iz materialov na osnovi celuloze in plastomerov (navadno imenovani lesno-polimerni kompoziti (WPC) ali kompoziti iz naravnih vlaken (NFC)) - 6. del: Specifikacije za profile ograj in elementov
General Information
- Status
- Not Published
- Public Enquiry End Date
- 31-Mar-2017
- Technical Committee
- IPMA - Polimer materials and products
- Current Stage
- 98 - Abandoned project (Adopted Project)
- Start Date
- 08-Oct-2019
- Due Date
- 13-Oct-2019
- Completion Date
- 08-Oct-2019
Relations
- Effective Date
- 30-Aug-2017
- Effective Date
- 20-Jul-2016
Overview
SIST EN 15534-6:2015/oprA1:2017 is a European standard developed by CEN that specifies the performance requirements and specifications for fencing profiles and elements made from composites of cellulose-based materials and thermoplastics. These composites are commonly known as wood-polymer composites (WPC) or natural fibre composites (NFC). This part 6 of the EN 15534 series focuses specifically on fencing products designed for non-structural fencing applications.
The standard excludes security systems, perimeter protection, handrails, and any load-bearing applications from its scope. It places responsibility on system suppliers to ensure compliance with applicable regulations when using profiles covered by this part of the standard. For relevant test methods, EN 15534-1 serves as a complementary reference.
Key Topics
Material Composition
Covers composites made from cellulose fibers combined with thermoplastic polymers to create durable, sustainable fencing profiles and elements.Specifications for Fencing Profiles
Defines requirements for physical characteristics, including dimensions, surface finish, and structural integrity suitable for non-load-bearing fencing applications.Testing Procedures and Methods
Outlines modifications to testing apparatus and procedures, such as radiant panel specifications and temperature control, to ensure consistent material performance evaluations.Bow and Cupping Measurement
Establishes protocols for measuring and assessing deformation (bow and cupping) after exposure to controlled irradiation, reflecting weathering and durability performance.Non-Structural Application Scope
Limits the application to standard fencing elements, excluding structural or security-related functions, ensuring focused standardization within this niche.
Applications
Residential and Commercial Fencing
Suitable for use in fencing systems around homes, gardens, parks, and commercial properties where non-load-bearing panels and profiles are required.Landscape and Decorative Fencing
Ideal for natural aesthetic fencing options incorporating sustainable materials that simulate the look and feel of wood while offering enhanced durability.Outdoor Building Elements
Includes use in gates, posts, slats, and panel components made from WPC or NFC, providing weather-resistant and low-maintenance alternatives to traditional wood products.Sustainable Construction Materials
Supports eco-friendly initiatives by utilizing natural fibers blended with plastics, promoting recyclability and reduced reliance on virgin timber.
Related Standards
EN 15534-1
Specifies the general test methods and procedures applicable to composites made from cellulose-based materials and thermoplastics, complementing Part 6.Other EN 15534 Parts
Cover different product types and applications using wood-polymer composites or natural fibre composites, providing a comprehensive framework for product standardization.Industry Regulations for Fencing Systems
While EN 15534-6 does not cover load-bearing or security aspects, users must comply with local building codes and safety requirements applicable to fencing installations.
By adhering to SIST EN 15534-6:2015/oprA1:2017, manufacturers and suppliers of WPC or NFC fencing profiles can ensure product reliability, durability, and consistent quality for non-structural fencing applications. This facilitates market acceptance, regulatory compliance, and consumer confidence in modern composite fencing solutions.
Frequently Asked Questions
SIST EN 15534-6:2015/oprA1:2017 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements". This standard covers: This part of EN 15534 specifies the characteristics of fencing profiles and elements made from cellulose-based materials and thermoplastics, usually called wood-polymer composites (WPC) or natural fibre composites (NFC). It is applicable to fencing profiles and elements for non-structural fencing systems. The security systems, perimeter protections, handrails and load bearing applications are out of the scope of this part of EN 15534. Any systems made from profiles in the scope of this part of EN 15534 that are affected by regulations are under the responsibility of the system supplier. EN 15534 1 specifies some of the test methods relevant to this part of EN 15534. NOTE For editorial reasons, in EN 15534 the abbreviation “WPC” is used for “composites made from cellulose-based materials and thermoplastics”.
This part of EN 15534 specifies the characteristics of fencing profiles and elements made from cellulose-based materials and thermoplastics, usually called wood-polymer composites (WPC) or natural fibre composites (NFC). It is applicable to fencing profiles and elements for non-structural fencing systems. The security systems, perimeter protections, handrails and load bearing applications are out of the scope of this part of EN 15534. Any systems made from profiles in the scope of this part of EN 15534 that are affected by regulations are under the responsibility of the system supplier. EN 15534 1 specifies some of the test methods relevant to this part of EN 15534. NOTE For editorial reasons, in EN 15534 the abbreviation “WPC” is used for “composites made from cellulose-based materials and thermoplastics”.
SIST EN 15534-6:2015/oprA1:2017 is classified under the following ICS (International Classification for Standards) categories: 79.080 - Semi-manufactures of timber; 83.140.99 - Other rubber and plastics products. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 15534-6:2015/oprA1:2017 has the following relationships with other standards: It is inter standard links to SIST EN 15534-6:2015+A1:2018, SIST EN 15534-6:2015. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 15534-6:2015/oprA1:2017 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2017
Kompoziti iz materialov na osnovi celuloze in plastomerov (navadno imenovani
lesno-polimerni kompoziti (WPC) ali kompoziti iz naravnih vlaken (NFC)) - 6. del:
Specifikacije za profile ograj in elementov
Composites made from cellulose-based materials and thermoplastics (usually called
wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6:
Specifications for fencing profiles and elements
Verbundwerkstoffe aus cellulosehaltigen Materialien und Thermoplasten (üblicherweise
Holz-Polymer-Werkstoffe (WPC) oder Naturfaserverbundwerkstoffe (NFC) genannt) -
Teil 6: Anforderungen an Zaunprofile und -elemente
Composites à base de matières cellulosiques et de thermoplastiques (communément
appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle
(NFC)) - Partie 6 : Spécifications relatives aux profiles et éléments pour clôture
Ta slovenski standard je istoveten z: EN 15534-6:2015/prA1
ICS:
79.080 Polizdelki iz lesa Semi-manufactures of timber
83.140.99 Drugi izdelki iz gume in Other rubber and plastics
polimernih materialov products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
EN 15534-6:2015
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
January 2017
ICS 79.080; 83.140.99
English Version
Composites made from cellulose-based materials and
thermoplastics (usually called wood-polymer composites
(WPC) or natural fibre composites (NFC)) - Part 6:
Specifications for fencing profiles and elements
Composites à base de matières cellulosiques et de Verbundwerkstoffe aus cellulosehaltigen Materialien
thermoplastiques (communément appelés composites und Thermoplasten (üblicherweise Holz-Polymer-
bois-polymères (WPC) ou composites fibres d'origine Werkstoffe (WPC) oder Naturfaserverbundwerkstoffe
naturelle (NFC)) - Partie 6 : Spécifications relatives aux (NFC) genannt) - Teil 6: Anforderungen an Zaunprofile
profiles et éléments pour clôture und -elemente
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 249.
This draft amendment A1, if approved, will modify the European Standard EN 15534-6:2015. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15534-6:2015/prA1:2017 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Modification to B.2, Apparatus . 4
2 Modifications to B.5, Procedure .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...