SIST EN ISO 11961:2019/A1:2020
(Main)Petroleum and natural gas industries - Steel drill pipe - Amendment 1 (ISO 11961:2018/Amd 1:2020)
Petroleum and natural gas industries - Steel drill pipe - Amendment 1 (ISO 11961:2018/Amd 1:2020)
Industries du pétrole et du gaz naturel - Tiges de forage en acier - Amendement 1 (ISO 11961:2018/Amd 1:2020)
Industrija nafte in zemeljskega plina - Jeklene vrtalne cevi - Dopolnilo A1 (ISO 11961:2018/Amd 1:2020)
General Information
Relations
Overview
SIST EN ISO 11961:2019/A1:2020 is an important amendment to the international standard governing steel drill pipes used in the petroleum and natural gas industries. Published by the European Committee for Standardization (CEN) and aligned with ISO technical committee ISO/TC 67, this amendment updates the specifications originally set in ISO 11961:2018. It focuses on enhancing the quality, safety, and performance standards for steel drill pipes, which are critical components in exploratory and extraction equipment for oil and gas drilling.
This standard is applicable throughout the European Union and CEN member countries, which include Austria, France, Germany, the United Kingdom, and many others. SIST EN ISO 11961:2019/A1:2020 must be adopted as a national standard by January 2021, ensuring consistency across jurisdictions while supporting the petroleum sector’s evolving technological requirements.
Key Topics
Steel Drill Pipe Specifications
The amendment refines the mechanical and chemical requirements for steel drill pipes, ensuring reliability and durability under high-pressure and high-stress environments encountered in drilling operations.Manufacturing and Quality Control
It emphasizes stringent manufacturing processes and quality assurance protocols, including enhanced material testing and inspection criteria, to reduce failure risks during operation.Technical Diagrams and Figures
This amendment includes updates to technical drawings and figures (such as the replacement of Figure B.14 c) Solid Barstock), which provide clearer guidance for manufacturers and engineers on correct drill pipe construction.Conformity and Compliance
The document highlights the need for conformity with national regulations and the avoidance of conflicting standards, facilitating smoother international trade and regulatory approvals.Patent and Intellectual Property Considerations
Users are notified of potential patent rights associated with some elements of the standard, reflecting the innovative nature of drilling technology.
Applications
Oil and Gas Drilling Operations
Steel drill pipes standardized under this amendment are essential for rotary drilling rigs, supporting deep well operations in both onshore and offshore environments.Exploration and Production Equipment
Ensures compatibility and performance of drill pipes with other extraction and exploration equipment, including casing and tubing.Safety and Operational Efficiency
Adhering to this standard minimizes the risk of equipment failure, thus protecting personnel, reducing downtime, and optimizing drilling efficiency.Manufacturing and Supply Chain
Manufacturers and suppliers utilize this updated standard to meet industry expectations for steel drill pipe quality, promoting competitiveness and compliance.
Related Standards
EN ISO 11961:2018 - The base document for steel drill pipes, providing the primary framework for pipe design and classification.
ISO/TC 67 Series - Other standards related to materials, equipment, and offshore structures for petroleum and natural gas industries.
CEN/CENELEC Regulations - General guidelines for the incorporation of amendments into national standards within Europe.
API Spec 5DP - American Petroleum Institute's standard specification for drill pipes, often used in conjunction with ISO standards for global operations.
Keywords: steel drill pipe standards, petroleum industries, natural gas drilling, EN ISO 11961 amendment, drill pipe manufacturing, quality assurance, drilling equipment standards, CEN regulations, petroleum extraction equipment.
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2020
Industrija nafte in zemeljskega plina - Jeklene vrtalne cevi - Dopolnilo A1 (ISO
11961:2018/Amd 1:2020)
Petroleum and natural gas industries - Steel drill pipe - Amendment 1 (ISO
11961:2018/Amd 1:2020)
Industries du pétrole et du gaz naturel - Tiges de forage en acier - Amendement 1 (ISO
11961:2018/Amd 1:2020)
Ta slovenski standard je istoveten z: EN ISO 11961:2018/A1:2020
ICS:
75.180.10 Oprema za raziskovanje, Exploratory, drilling and
vrtanje in odkopavanje extraction equipment
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 11961:2018/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2020
EUROPÄISCHE NORM
ICS 77.140.75
English Version
Petroleum and natural gas industries - Steel drill pipe -
Amendment 1 (ISO 11961:2018/Amd 1:2020)
Industries du pétrole et du gaz naturel - Tiges de forage
en acier - Amendement 1 (ISO 11961:2018/Amd
1:2020)
This amendment A1 modifies the European Standard EN ISO 11961:2018; it was approved by CEN on 8 July 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11961:2018/A1:2020 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 11961:2018/A1:2020) has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries"
in collaboration with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures
for petroleum, petrochemical and natural gas industries” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2021, and conflicting national standards shall
be withdrawn at the latest by January 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg
...
Frequently Asked Questions
SIST EN ISO 11961:2019/A1:2020 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Petroleum and natural gas industries - Steel drill pipe - Amendment 1 (ISO 11961:2018/Amd 1:2020)". This standard covers: Petroleum and natural gas industries - Steel drill pipe - Amendment 1 (ISO 11961:2018/Amd 1:2020)
Petroleum and natural gas industries - Steel drill pipe - Amendment 1 (ISO 11961:2018/Amd 1:2020)
SIST EN ISO 11961:2019/A1:2020 is classified under the following ICS (International Classification for Standards) categories: 75.180.10 - Exploratory, drilling and extraction equipment; 77.140.75 - Steel pipes and tubes for specific use. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN ISO 11961:2019/A1:2020 has the following relationships with other standards: It is inter standard links to SIST EN ISO 11961:2019. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase SIST EN ISO 11961:2019/A1:2020 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...