SIST EN ISO 15874-3:2013/A1:2018
(Amendment)Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 1 (ISO 15874-3:2013/Amd 1:2018)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 1 (ISO 15874-3:2013/Amd 1:2018)
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polypropylen (PP) - Teil 3: Formstücke (ISO 15874-3:2013/Amd 1:2018)
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polypropylène (PP) - Partie 3: Raccords - Amendement 1 (ISO 15874-3:2013/Amd 1:2018)
Cevni sistemi iz polimernih materialov za napeljave z vročo in hladno vodo - Polipropilen (PP) - 3. del: Fitingi - Dopolnilo A1 (ISO 15874-3:2013/Amd 1:2018)
General Information
- Status
- Published
- Public Enquiry End Date
- 04-Sep-2017
- Publication Date
- 10-Oct-2018
- Technical Committee
- PCV - Plastic pipes, fittings and valves
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 20-Aug-2018
- Due Date
- 25-Oct-2018
- Completion Date
- 11-Oct-2018
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 01-Nov-2018
Overview
SIST EN ISO 15874-3:2013/A1:2018 is an important amendment to the international standard for plastics piping systems used in hot and cold water installations. Specifically, it focuses on polypropylene (PP) fittings, which are critical components in plumbing and water supply systems. This amendment (Amendment 1) was approved in 2018 by the European Committee for Standardization (CEN) and aligns with ISO’s global framework, ensuring compatibility and safety in plastic piping applications.
This standard defines technical requirements and specifications for polypropylene fittings in water installations, enhancing system performance, reliability, and longevity. As a harmonized document, SIST EN ISO 15874-3:2013/A1:2018 must be adopted without modification by member countries of CEN, making it a cornerstone for consistent manufacturing and testing practices across Europe and beyond.
Key Topics
Scope of Application
Applies to polypropylene (PP) piping fittings used in both hot and cold water installations. It covers dimensions, material properties, and fitting performance to ensure safe and effective fluid transport.Technical Amendments
The Amendment 1 notably updates the socket dimensions for electrofusion fittings, extending the nominal diameters up to 250 mm while retaining previous specifications for diameters from 16 mm to 160 mm. This facilitates broader applicability for larger system designs.Socket Dimensions for Electrofusion Fittings
Detailed tables provide precise dimensions such as nominal diameter, depth of penetration, and fusion zone length ensuring standardized jointing and welding procedures. This results in secure, leak-proof connections critical in pressurized water systems.Harmonization and Compliance
SIST EN ISO 15874-3:2013/A1:2018 ensures conformity with both ISO and CEN regulations. National standards bodies in multiple European countries are mandated to implement this standard, promoting uniformity for manufacturers and installers.Patent and Usage Considerations
Users should be aware of possible patent rights associated with certain elements of the standard. The document does not endorse specific trade names but provides a neutral technical foundation for industry adoption.
Applications
Domestic and Commercial Hot & Cold Water Systems
The polypropylene fittings defined in this standard are widely used in building water supply systems, from residential plumbing to commercial infrastructure, ensuring durable and safe delivery of potable water.Industrial Fluid Transport
While focused on water installations, the standardized fittings can also be employed in light industrial settings where corrosion resistance, temperature stability, and hygiene are critical.Electrofusion Jointing Systems
The updated socket dimensions enable reliable electrofusion connections, crucial for automated and consistent welding processes in modern pipe installation and repair.Infrastructure Projects
The extended range of fitting sizes supports larger diameter piping systems used in municipal water supply networks or large buildings, improving scalability and design flexibility.
Related Standards
EN ISO 15874 Series
The overall EN ISO 15874 comprises several parts covering pipes, fittings, valves, and testing methods for polypropylene piping systems in hot and cold water setups.ISO/TC 138 and CEN/TC 155
These technical committees oversee the development and maintenance of plastics piping standards, ensuring up-to-date technical guidance reflecting industry advances.EN 12201
This standard addresses polyethylene (PE) piping systems, often used alongside polypropylene systems in water installations.ISO 15874-2
Specifies pipes for polypropylene systems, complementing the fittings standard to guarantee compatible system components.
By adhering to SIST EN ISO 15874-3:2013/A1:2018, manufacturers, installers, and engineers benefit from a harmonized and comprehensive standard that promotes safety, quality, and interoperability of polypropylene hot and cold water piping systems on an international scale. This structured approach minimizes installation errors and enhances system durability, optimizing plumbing solutions worldwide.
Frequently Asked Questions
SIST EN ISO 15874-3:2013/A1:2018 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 1 (ISO 15874-3:2013/Amd 1:2018)". This standard covers: Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 1 (ISO 15874-3:2013/Amd 1:2018)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 1 (ISO 15874-3:2013/Amd 1:2018)
SIST EN ISO 15874-3:2013/A1:2018 is classified under the following ICS (International Classification for Standards) categories: 23.040.45 - Plastics fittings; 91.140.60 - Water supply systems. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN ISO 15874-3:2013/A1:2018 has the following relationships with other standards: It is inter standard links to SIST EN ISO 15874-3:2013. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN ISO 15874-3:2013/A1:2018 is associated with the following European legislation: EU Directives/Regulations: 89/106/EEC; Standardization Mandates: M/131. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN ISO 15874-3:2013/A1:2018 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2018
&HYQLVLVWHPLL]SROLPHUQLKPDWHULDORY]DQDSHOMDYH]YURþRLQKODGQRYRGR
3ROLSURSLOHQ 33 GHO )LWLQJL'RSROQLOR$ ,62 $PG
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3:
Fittings - Amendment 1 (ISO 15874-3:2013/Amd 1:2018)
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polypropylen
(PP) - Teil 3: Formstücke (ISO 15874-3:2013/Amd 1:2018)
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide -
Polypropylène (PP) - Partie 3: Raccords - Amendement 1 (ISO 15874-3:2013/Amd
1:2018)
Ta slovenski standard je istoveten z: EN ISO 15874-3:2013/A1:2018
ICS:
23.040.45 Fitingi iz polimernih Plastics fittings
materialov
91.140.60 Sistemi za oskrbo z vodo Water supply systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 15874-3:2013/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2018
EUROPÄISCHE NORM
ICS 23.040.45; 91.140.60
English Version
Plastics piping systems for hot and cold water installations
- Polypropylene (PP) - Part 3: Fittings - Amendment 1 (ISO
15874-3:2013/Amd 1:2018)
Systèmes de canalisations en plastique pour les Kunststoff-Rohrleitungssysteme für die Warm- und
installations d'eau chaude et froide - Polypropylène Kaltwasserinstallation - Polypropylen (PP) - Teil 3:
(PP) - Partie 3: Raccords - Amendement 1 (ISO 15874- Formstücke - Änderung 1 (ISO 15874-3:2013/Amd
3:2013/Amd 1:2018) 1:2018)
This amendment A1 modifies the European Standard EN ISO 15874-3:2013; it was approved by CEN on 28 June 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15874-3:2013/A1:2018 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 15874-3:2013/A1:2018) has been prepared by Technical Committee ISO/TC
138 "Plastics pipes, fittings and valves for the transport of fluids" in collaboration with Technical
Committee CEN/TC 155 “Plastics piping systems and ducting systems” the secretariat of which is held
by NEN.
This Amendment to the European Standard EN ISO 15874-3:2013 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by February 2019,
and conflicting national standards shall be withdrawn at the latest by February 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Endorsement notice
The text of ISO 15874-3:2013/Amd 1:2018 has been approved by CEN as EN ISO 15874-
3:2013/A1:2018 without any modifica
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...