SIST EN 13286-49:2004

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ungebundene und hydraulisch gebundene Gemische - Teil 49: Beschleunigte Quellprüfung von mit Kalk und/oder hydraulischem Bindemittel behandeltem BodenMélanges traités et mélanges non traités aux liants hydrauliques - Partie 49: Essai de gonflement accéléré pour les sol traité a la chaux et/ou avec un liant hydrauliqueUnbound and hydraulically bound mixtures - Part 49: Accelerated swelling test for soil treated by lime and/or hydraulic binder93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 13286-49:2004SIST EN 13286-49:2004en01-september-2004SIST EN 13286-49:2004SLOVENSKI
STANDARD



SIST EN 13286-49:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13286-49March 2004ICS 93.080.20English versionUnbound and hydraulically bound mixtures - Part 49:Accelerated swelling test for soil treated by lime and/or hydraulicbinderMélanges non traités et mélanges à base de lianthydraulique - Partie 49: Essai de gonflement accéléré pourles sols traités à la chaux et/ou liant hydrauliqueUngebundene und hydraulisch gebundene Gemische - Teil49: Beschleunigte Quellprüfung von mit Kalk und/oderhydraulischem Bindemittel behandeltem BodenThis European Standard was approved by CEN on 9 January 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13286-49:2004: ESIST EN 13286-49:2004



EN 13286-49:2004 (E)2ContentspageForeword.31Scope.52Normative references.53Terms and definitions.54Principle.55Apparatus.56Procedure.66.1Production of the test specimens.66.2Storage of the test specimens.76.2.1Treatment with lime alone.76.2.2Treatment with a hydraulic binder or hydraulic binder in association with lime.76.3Measurement of the expansion of the test specimens.77Calculation and expression of the results.88Test report.9Annex A (informative)
Example of a test report.10Bibliography.11SIST EN 13286-49:2004



EN 13286-49:2004 (E)3ForewordThis document (EN 13286-49:2004) has been prepared by Technical Committee CEN/TC 227 “Roadmaterials”, the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identicaltest or by endorsement, at the latest by September 2004, and conflicting national standards shall bewithdrawn at the latest by December 2004.This European standard is one of a series of standards as listed below.EN 13286-1, Unbound and hydraulically bound mixtures — Part 1: Test methods for laboratory referencedensity and water content — Introduction, general requirements and sampling.prEN 13286-2, Unbound and hydraulically bound mixtures — Part 2: Test methods for laboratory referencedensity and moisture content — Proctor compaction.EN 13286-3, Unbound and hydraulically bound mixtures — Part 3: Test methods for laboratory referencedensity and water content — Vibrocompression with controlled parameters.EN 13286-4, Unbound and hydraulically bound mixtures — Part 4: Test methods for laboratory referencedensity and water content — Vibrating hammer.EN 13286-5, Unbound and hydraulically bound mixtures — Part 5: Test methods for laboratory referencedensity and water content — Vibrating table.EN 13286-7, Unbound and hydraulically bound mixtures — Test methods — Part 7: Cyclic load triaxial test forunbound mixtures.EN 13286-40, Unbound and hydraulically bound mixtures — Part 40: Test method for the determination of thedirect tensile strength of hydraulically bound mixtures.EN 13286-41, Unbound and hydraulically bound mixtures — Part 41: Test method for the determination of thecompressive strength of hydraulically bound mixtures.EN 13286-42, Unbound and hydraulically bound mixtures — Part 42: Test method for the determination of theindirect tensile strength of hydraulically bound mixtures.EN 13286-43, Unbound and hydraulically bound mixtures — Part 43: Test method for the determination of themodulus of elasticity of hydraulically bound mixtures.EN 13286-44, Unbound and hydraulically bound mixtures — Part 44: Test method for the determination of thealpha coefficient of vitrified blast furnace slag.EN 13286-45, Unbound and hydraulically bound mixtures — Part 45: Test method for the determination of theworkability period of hydraulically bound mixtures.EN 13286-46, Unbound and hydraulically bound mixtures — Part 46: Test method for the determination of themoisture condition value.EN 13286-47, Unbound and hydraulically bound mixtures — Part 47: Test method for the determination ofCalifornia bearing ratio, immediate bearing index and linear swelling.SIST EN 13286-49:2004



EN 13286-49:2004 (E)4prEN 13286-48, Unbound and hydraulically bound mixtures — Part 48: Test method for the determination ofdegree of pulverisation.EN 13286-49, Unbound and hydraulically bound mixtures — Part 49: Accelerated swelling test for soil treatedby lime and/or hydraulic binders.prEN 13286-50, Unbound and hydraulically bound mixtures — Part 50: Methods for making test specimensusing proctor equipment or vibrating table compaction.prEN 13286-51, Unbound and hydraulically bound mixtures — Part 51: Methods for making test specimensby vibrating hammer compaction.prEN 13286-52, Unbound and hydraulically bound mixtures — Methods for making test specimens — Part 52:Making specimens
by vibrocompression.prEN 13286-53, Unbound and hydraulically bound mixtures — Methods for making test specimens — Part 53:Making cylindrical specimens by axial compression.Annex A is informative.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerlandand United Kingdom.SIST EN 13286-49:2004



EN 13286-49:2004 (E)51 ScopeThis European Standard describes an accelerated swelling test for soil treated by lime and/or hydraulic binder.The test method is applicable to mixtures that have sufficient fines or cohesion to permit, immediately aftermanufacture, the extrusion of the specimen from the mould without damage.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications.These normative references are cited at the appropriate places in the text, and the publications are listedhereafter. For dated references, subsequent amendments to or revisions of any of these publications apply tothis European Standard only when incorporated in it by amendment or revision. For undated references thelatest edition of the publication referred to applies (including amendments).prEN 13286-2, Unbound an
...