Aerospace series - Aluminium alloy AL-P5052-O - Sheet and strip 0,3 mm ≤ a ≤ 6 mm

This standard specifies the requirements relating to:
Aluminium alloy AL-P5052-O - Sheet and strip 0,3 mm < a < 6 mm for aerospace applications.

Luft- und Raumfahrt - Aluminiumlegierung AL-P5052-O - Bleche und Bänder 0,3 mm ≤ a ≤ 6 mm

Diese Norm legt die Anforderungen an
Aluminiumlegierung AL P5052-O
Bleche und Bänder
0,3 mm ≤ a ≤ 6 mm
für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Alliage d'aluminium AL-P5052-O - Tôles et bandes 0,3 mm ≤ a ≤ 6 mm

Aeronavtika - Aluminijeva zlitina AL-P5052-O - Pločevina in trakovi 0,3 mm ≤ a ≤ 6 mm

General Information

Status
Published
Publication Date
14-Jan-2009
ICS
49.025.20 - Aluminium
Technical Committee
I13 - Imaginarni 13
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
08-Jan-2009
Due Date
15-Mar-2009
Completion Date
15-Jan-2009
Ref Project
EN 4005:2007 - Aerospace series - Aluminium alloy AL-P5052-O - Sheet and strip 0,3 mm ≤ a ≤ 6 mm

Overview

EN 4005:2007 (CEN) is a European aerospace material standard that defines requirements for aluminium alloy AL‑P5052‑O - sheet and strip with thicknesses 0.3 mm ≤ a ≤ 6 mm. Part of the Aerospace series of metallic material standards, EN 4005:2007 standardizes composition, form, production method, dimensional limits and basic mechanical property limits for this wrought aluminium alloy intended for aerospace applications.

Key topics and requirements

  • Material designation: Aluminium alloy AL‑P5052‑O (sheet and strip).
  • Form and production: Rolled sheet and strip; thickness range 0.3–6 mm.
  • Delivery condition: Specified as O (see EN 4400-2 for delivery/heat treatment details).
  • Chemical composition (maximums):
    • Si 0.25%, Fe 0.40%, Cu 0.10%, Mn 0.10%
    • Mg 2.8%, Cr 0.35%, Zn 0.10%
    • Other individual elements ≤ 0.05%, total others ≤ 0.15%
    • Aluminium balance (base).
  • Mechanical properties (ambient temperature):
    • Proof stress Rp0.2 ≥ 65 MPa for both thickness ranges
    • Tensile strength Rm = 170–215 MPa
    • Elongation A (A50 mm):
      • ≥ 16% for 0.3 ≤ a ≤ 0.8 mm
      • ≥ 19% for 0.8 < a ≤ 6 mm
  • Testing, inspection and sampling: Test specimens, test pieces and inspection procedures referenced to EN 4400‑2 (Aerospace aluminium technical specification).
  • Product qualification: Qualification programme to be agreed between manufacturer and purchaser.

Applications and users

  • Targeted for aerospace applications requiring AL‑P5052‑O in sheet and strip form within the specified thickness range.
  • Primary users:
    • Materials and metallurgical engineers specifying aluminium alloys for aerospace components
    • Aircraft manufacturers and suppliers producing rolled sheet and strip
    • Procurement and quality teams applying acceptance criteria and inspections
    • Certification and compliance specialists ensuring material conformity to aerospace standards

Related standards

  • EN 4400‑2: Technical specification for aluminium and aluminium alloy wrought products - Sheet and strip (referenced for testing and delivery requirements).
  • EN 4258: General organization of aerospace metallic material standards (series organization).
  • EN 4500‑2: Rules for drafting and presentation of aluminium alloy material standards (used for preparation).

EN 4005:2007 provides a concise, harmonized specification for AL‑P5052‑O sheet/strip in the aerospace supply chain, enabling consistent material selection, testing and contractual agreement between manufacturers and purchasers.

Frequently Asked Questions

SIST EN 4005:2009 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aerospace series - Aluminium alloy AL-P5052-O - Sheet and strip 0,3 mm ≤ a ≤ 6 mm". This standard covers: This standard specifies the requirements relating to: Aluminium alloy AL-P5052-O - Sheet and strip 0,3 mm < a < 6 mm for aerospace applications.

This standard specifies the requirements relating to: Aluminium alloy AL-P5052-O - Sheet and strip 0,3 mm < a < 6 mm for aerospace applications.

SIST EN 4005:2009 is classified under the following ICS (International Classification for Standards) categories: 49.025.20 - Aluminium. The ICS classification helps identify the subject area and facilitates finding related standards.

SIST EN 4005:2009 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.PPPP49.025.20AluminijAluminiumICS:Ta slovenski standard je istoveten z:EN 4005:2007SIST EN 4005:2009en,de01-marec-2009SIST EN 4005:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4005
March 2007 ICS 77.150.10 English Version
Aerospace series - Aluminium alloy AL-P5052-O - Sheet and strip 0,3 mm ≤
a ≤
6 mm
Série aérospatiale - Alliage d'aluminium AL-P5052-O - Tôles et bandes 0,3 mm ≤ a ≤ 6 mm
Luft- und Raumfahrt - Aluminiumlegierung AL-P5052-O - Bleche und Bänder 0,3 mm ≤ a ≤ 6 mm This European Standard was approved by CEN on 12 June 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4005:2007: ESIST EN 4005:2009
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...