SIST EN 16292:2013
(Main)Glass packaging - Screw finishes - Depressed threads
Glass packaging - Screw finishes - Depressed threads
This document specifies the profiles of thread for all the screw deck finishes for metallic, plastic and metalloplastic closures. The depressed threads could be used on continuous threads finishes to reduce the thread depth at and adjacent to the mould parting line.
Verpackungen aus Glas - Schraubmundstücke - Abgeflachte Gewinde
Dieses Dokument legt die Gewindeprofile für alle Schraubmundstücke für Metall-, Kunststoff- und Metall-Kunst¬stoff-Verschlüsse fest.
Die abgeflachten Gewinde könnten für Mundstücke mit durchgehendem Gewinde verwendet werden, um die Gewindetiefe an und neben der Formnaht zu verringern.
Emballage en verre - Bagues à vis - Depression de filet
La présente Norme européenne spécifie les profils de filets des bagues de col à vis destinées à recevoir des capsules en métal, en plastique ou des capsules constituées de métal et de plastique.
La dépression des filets peut être utilisée sur des bagues à filets continus pour réduire la profondeur de filet au niveau du joint de moule.
Les dépressions de filet ne sont utilisées que sur des bagues recevant des capsules aluminium à vis, à témoin d’effraction, ≥ 28 mm, lorsque la capsule est formée sur la bague.
Steklena embalaža - Grla z navojem - Ploščati navoj
Ta dokument določa profile za vse obloge navoja grla za kovinska, plastična in kovinskoplastična zapirala. Ploščate navoje je mogoče uporabljati na neprekinjenih navojih za zmanjšanje globine navoja na delilni črti pri vlivanju in ob njej.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Verpackungen aus Glas - Schraubmundstücke - Abgeflachte GewindeEmballage en verre - Bagues à vis - Depression de filetGlass packaging - Screw finishes - Depressed threads55.100Steklenice. Lonci. KozarciBottles. Pots. JarsICS:Ta slovenski standard je istoveten z:EN 16292:2013SIST EN 16292:2013en,fr,de01-maj-2013SIST EN 16292:2013SLOVENSKI
STANDARD
SIST EN 16292:2013
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16292
March 2013 ICS 55.100 English Version
Glass packaging - Screw finishes - Depressed threads
Emballage en verre - Bagues à vis - Dépression de filets
Verpackungen aus Glas - Schraubmundstücke - Abgeflachte Gewinde This European Standard was approved by CEN on 12 January 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16292:2013: ESIST EN 16292:2013
EN 16292:2013 (E) 2 Contents Page Foreword . 3 Introduction . 4 1 Scope . 5 2 Requirements . 5 Bibliography. 7
SIST EN 16292:2013
EN 16292:2013 (E) 3
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.