SIST EN ISO 15083:2018

SLOVENSKI STANDARD
SIST EN ISO 15083:2018
01-december-2018
1DGRPHãþD
SIST EN ISO 15083:2004
0DODSORYLOD.DOXåQLVLVWHPLQDþROQLK,62
Small craft - Bilge-pumping systems (ISO 15083:2003)
Kleine Wasserfahrzeuge - Lenzeinrichtungen (ISO 15083:2003)
Petits navires - Systèmes de pompes de cale (ISO 15083:2003)
Ta slovenski standard je istoveten z: EN ISO 15083:2018
ICS:
47.080 ýROQL Small craft
SIST EN ISO 15083:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 15083:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 15083:2018


EN ISO 15083
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2018
EUROPÄISCHE NORM
ICS 47.080 Supersedes EN ISO 15083:2003
English Version

Small craft - Bilge-pumping systems (ISO 15083:2003)
Petits navires - Systèmes de pompes de cale (ISO Kleine Wasserfahrzeuge - Lenzeinrichtungen (ISO
15083:2003) 15083:2003)
This European Standard was approved by CEN on 16 April 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15083:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 15083:2018
EN ISO 15083:2018 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of Directive 2013/53/EU aimed to be covered . 4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 15083:2018
EN ISO 15083:2018 (E)
European foreword
The text of ISO 15083:2003 has been prepared by Technical Committee ISO/TC 188 “Small craft” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 15083:2018.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2019, and conflicting national standards shall be
withdrawn at the latest by March 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 15083:2003.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive 2013/53/EU.
For relationship with EU Directive 2013/53/EU, see informative Annex ZA, which is an integral part of
this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
the United Kingdom.
Endorsement notice
The text of ISO 15083:2003 has been approved by CEN as EN ISO 15083:2018 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 15083:2018
EN ISO 15083:2018 (E)
Annex ZA
(informative)

Relationship between this European Standard and the Essential
Requirements of Directive 2013/53/EU aimed to be covered
This European standard has been prepared under a Commission’s standardization request M/542
C(2015) 8736 final to provide one voluntary means of conforming to Essential Requirements of Directive
2013/53/EU.
Once this standard is cited in the Official Journal of the European Union under that Directive, compliance
with the normative clauses of this standard given in Table ZA.1 confers, within the limits of the scope of
this standard, a presumption of conformity with the corresponding Essential Requirements of that
Directive and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Annex I of Directive
2013/53/EU
Essential Requirements Clause(s)/sub- Remarks/Notes
of Directive clause(s) of this EN
2013/53/EU
Annex I, Part A, 3.5 - 4, 5, 6, 7 In respect of the requirements, design, construction
Flooding and installation of bilge pumping systems to remove
normal accumulations of bilge water only.
Annex I, Part A, 2.5 – 5.1.2, 5.1.3.2, 8, Annex A It should be noted that clauses 5.1.2 and 5.1.3.2 require
Owner’s manual the means of bailing to be specified in the owner’s
manual.
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.
4

---------------------- Page: 6 ----------------------

SIST EN ISO 15083:2018


INTERNATIONAL ISO
STANDARD 15083
First edition
2003-02-01


Small craft — Bilge-pumping systems
Petits navires — Systèmes de pompes de cale




Reference number
ISO 15083:2003(E)
©
ISO 2003

---------------------- Page: 7 ----------------------

SIST EN ISO 15083:2018
ISO 15083:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2003 — All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 15083:2018
ISO 15083:2003(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope. 1
2 Normative references. 1
3 Terms and definitions. 1
4 Symbols. 3
5 Requirements. 4
5.1 Type, number and location . 4
5.2 Summary of requirements. 5
5.3 Capacity. 5
6 Design and construction. 6
6.1 General. 6
6.2 Electrically operated pumps . 6
7 Installation. 6
8 Owner’s manual. 7
Annex A (normative) Information to be provided in the owner’s manual . 8


© ISO 2003 — All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 15083:2018
ISO 15083:2003(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 15083 was prepared by Technical Committee ISO/TC 188, Small craft.
iv © ISO 2003 — All rights reserved

---------------------- Page: 10 ----------------------

SIST EN ISO 15083:2018
ISO 15083:2003(E)
Introduction
Bilge-pumping systems as specified in this International Standard are limited to normal amounts of water in an
intact boat due to spray, rain, seepage, spillage, and occasional small amounts of water shipped from boat
movements in heavy weather.
This International Standard is not intended to enable flooding resulting from hull damage, to be dealt with.

© ISO 2003 — All rights reserved v

---------------------- Page: 11 ----------------------

SIST EN ISO 15083:2018

---------------------- Page: 12 ----------------------

SIST EN ISO 15083:2018
INTERNATIONAL STANDARD ISO 15083:2003(E)

Small craft — Bilge-pumping systems
1 Scope
This International Standard specifies requirements for pumping or alternative means designed to remove
normal accumulations of bilge water for small craft with a hull length, L , up to 24 m according to ISO 8666.
H
This International Standard does not set requirements for bilge pumps or bilge-pumping systems designed for
damage control.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 8666:2002, Small craft — Principal data
1)
ISO 8849:— , Small craft — Electrically operated bilge-pumps
ISO 9093 (all par
...