iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 50083-2:1999

(Main)

Cable networks for television signals, sound signals and interactive services -- Part 2: Electromagnetic compatibility for equipment

Cable networks for television signals, sound signals and interactive services -- Part 2: Electromagnetic compatibility for equipment

This standard - applies to the radiation characteristics and immunity to electromagnetic disturbances of active and passive equipment for the reception, processing and distribution of television and sound signals, as dealt with in the following parts of EN 50083 "Cabled distribution systems for television and sound signals" and with the extent from the headend respectively from the interface point to a signal source up to the system outlet or the terminal input, where no system outlet exists: - EN 50083-3: "Active coaxial wideband distribution equipment" - EN 50083-4: "Passive coaxial wideband distribution equipment" - EN 50083-5: "Headend equipment" - EN 50083-6: "Optical equipment" - covers the following frequency ranges: Disturbance voltage injected into the mains 9 kHz to 30 MHz Radiation from active equipment (5 MHz)* 30 MHz to 25 GHz Immunity of active equipment 150 kHz to 25 GHz Screening effectiveness of passive equipment (5 MHz)* 30 MHz to 1,75 GHz (25GHz)* - specifies requirements for maximum allowed radiation, minimum immunity and minimum screening effectiveness; - describes test methods for conformance testing. Coaxial cables for cabled distribution systems do not fall under the scope of this standard. Reference is made to the European Standard series EN 50117 "Coaxial cables used in cabled distribution networks". The standardization in the field of "Electromagnetic compatibility" for any user terminals (i.e. tuners, receivers, decoders, multimedia terminals etc.) is excluded from this standard. For this kind of equipment the European Standards EN 55013 and EN 55020:1994 apply. * For frequency limits given in brackets the values and/or methods of measurement in this standard are under consideration.

Kabelnetze für Fernsehsignale, Tonsignale und interaktive Dienste -- Teil 2: Elektromagnetische Verträglichkeit von Geräten

Réseaux de distribution par câbles pour signaux de télévision, signaux de radiodiffusion sonore et services interactifs -- Partie 2: Compatibilité électromagnétique pour les matériels

Cabled distribution systems for television, sound and interactive multimedia signals -- Part 2: Electromagnetic compatibility for equipment

General Information

Status
Withdrawn
Publication Date
31-Mar-1999
Withdrawal Date
28-Feb-2003
ICS
33.060.40 - Cabled distribution systems
33.100.01 - Electromagnetic compatibility in general
Technical Committee
AVM - Audio, video and multimedia systems and equipment
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Mar-2003
Due Date
01-Mar-2003
Completion Date
01-Mar-2003
Directive
89/336/EEC - Electromagnetic compatibility (EMC)
Mandate
BC/CLC/92-02 - BC/CLC/92-02
Ref Project
EN 50083-2:1995 - Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment

Relations

Amended By
SIST EN 50083-2:1999/A1:1999 - Cable networks for television signals, sound signals and interactive services -- Part 2: Electromagnetic compatibility for equipment
Effective Date
21-Sep-2010
Replaced By
SIST EN 50083-2:2003 - Cable networks for television signals, sound signals and interactive services -- Part 2: Electromagnetic compatibility for equipment
Effective Date
29-Jan-2023
Amended By
SIST EN 50083-2:1999/A1:1999 - Cable networks for television signals, sound signals and interactive services -- Part 2: Electromagnetic compatibility for equipment
Effective Date
29-Jan-2023
Amended By
SIST EN 50083-2:1999/A1:1999 - Cable networks for television signals, sound signals and interactive services -- Part 2: Electromagnetic compatibility for equipment
Effective Date
07-Jun-2022

Buy Standard

EN 50083-2:1999EN 50083-2:1999
PreviousNext
Standard
EN 50083-2:1999
English language
39 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50083-2:1999
01-april-1999
Cabled distribution systems for television, sound and interactive multimedia
signals -- Part 2: Electromagnetic compatibility for equipment
Cable networks for television signals, sound signals and interactive services -- Part 2:
Electromagnetic compatibility for equipment
Kabelnetze für Fernsehsignale, Tonsignale und interaktive Dienste -- Teil 2:
Elektromagnetische Verträglichkeit von Geräten
Réseaux de distribution par câbles pour signaux de télévision, signaux de radiodiffusion
sonore et services interactifs -- Partie 2: Compatibilité électromagnétique pour les
matériels
Ta slovenski standard je istoveten z: EN 50083-2:1995
ICS:
33.060.40 Kabelski razdelilni sistemi Cabled distribution systems
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 50083-2:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50083-2:1999

---------------------- Page: 2 ----------------------

SIST EN 50083-2:1999

---------------------- Page: 3 ----------------------

SIST EN 50083-2:1999

---------------------- Page: 4 ----------------------

SIST EN 50083-2:1999

---------------------- Page: 5 ----------------------

SIST EN 50083-2:1999

---------------------- Page: 6 ----------------------

SIST EN 50083-2:1999

---------------------- Page: 7 ----------------------

SIST EN 50083-2:1999

---------------------- Page: 8 ----------------------

SIST EN 50083-2:1999

---------------------- Page: 9 ----------------------

SIST EN 50083-2:1999

---------------------- Page: 10 ----------------------

SIST EN 50083-2:1999

---------------------- Page: 11 ----------------------

SIST EN 50083-2:1999

---------------------- Page: 12 ----------------------

SIST EN 50083-2:1999

---------------------- Page: 13 ----------------------

SIST EN 50083-2:1999

---------------------- Page: 14 ----------------------

SIST EN 50083-2:1999

---------------------- Page:
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 50083-2:2012/A1:2016(Amendment)
Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment
EN 50083-2:2012/A1:2015

2014-06-10 GVN: Tolerance allocated on Secretary's request (see tcminares on 2014-06-10).
D145/080: NWI approved

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50083-8:2014(Main)
Cable networks for television signals, sound signals and interactive services -- Part 8: Electromagnetic compatibility for networks
EN 50083-8:2013

EN 50083-8 applies to the radiation characteristics and immunity to electromagnetic disturbance of cable networks for television signals, sound signals and interactive services and covers the frequency range 0,15 MHz to 3,5 GHz. It should be noted that measurements below 30 MHz are not generally considered useful in the context of cable networks and are difficult to perform in practice. Application of the harmonized standard EN 50529-2 provides presumption of conformance to the EMC Directive. Therefore, to fulfil the requirements of EN 50529-2, it is necessary to use cable network equipment that satisfies the requirements of EN 50083-2 regarding limits of radiation and of immunity to external fields. This European Standard specifies methods of measurement and EMC performance requirements under operating conditions (in situ) to ensure the ongoing EMC integrity of cable networks. Cable networks beyond the system outlets (e.g. the receiver lead, in simplest terms) which begin at the system outlet and end at the input to the subscriber's terminal equipment are not covered by the standard EN 50083-8. Requirements for the electromagnetic compatibility of receiver leads are laid down in EN 60966-2-4, EN 60966-2-5 and EN 60966-2-6. Cable networks and a wide range of radio services have to coexist. These include for example the emergency services, safety of life, broadcasting, aeronautical, radio navigation services and also land mobile, amateur and cellular radio services. Frequency ranges of typical safety of life services are listed in Annex B. Additional protection for certain services may be required by national regulations.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50083-2:2012(Main)
Cable networks for television signals, sound signals and interactive services -- Part 2: Electromagnetic compatibility for equipment
EN 50083-2:2012

1.1   General
Standards of the EN 50083 and EN 60728 series deal with cable networks including equipment and associated methods of measurement for headend reception, processing and distribution of television signals, sound signals and their associated data signals and for processing, interfacing and transmitting all kinds of signals for interactive services using all applicable transmission media.
This includes
•   CATV-networks  ),
•   MATV-networks and SMATV-networks,
•   individual receiving networks
and all kinds of equipment, systems and installations installed in such networks.
The extent of this standardisation work is from the antennas and/or special signal source inputs to the headend or other interface points to the network up to the terminal input.
The standardisation of any user terminals (i.e., tuners, receivers, decoders, multimedia terminals, etc.) as well as of any coaxial, balanced and optical cables and accessories thereof is excluded.
1.2   Specific scope of EN 50083 2
This European Standard
•   applies to the radiation characteristics and immunity to electromagnetic disturbance of EM active equipment (active and passive equipment) for the reception, processing and distribution of television, sound and interactive multimedia signals as dealt with in the following parts of EN 50083 or EN 60728 series:
–   EN 60728-3   "Active wideband equipment for cable networks";
–   EN 60728-4   "Passive wideband equipment for coaxial cable networks";
–   EN 60728-5   "Headend equipment";
–   EN 60728-6   "Optical equipment";
•   covers the following frequency ranges:
disturbance voltage injected into the mains   150 kHz to 30 MHz;
radiation from active equipment    5 MHz to 25 GHz;
immunity of active equipment   150 kHz to 25 GHz  );
screening effectiveness of passive equipment   5 MHz to 3,5 GHz    (25 GHz)  );
•   specifies requirements for maximum allowed radiation, minimum immunity and minimum screening effectiveness;
•   describes test methods for conformance testing.

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    57 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50083-2:2012/oprA2:2019(Amendment)
Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment
EN 50083-2:2012/prA2

Amend EN 50083-2:2012 to tighten requirements regarding performance criteria in subclause 4.4 and update the normative references

  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50083-2:2012/A1:2016(Amendment)
Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment
EN 50083-2:2012/A1:2015

2014-06-10 GVN: Tolerance allocated on Secretary's request (see tcminares on 2014-06-10).
D145/080: NWI approved

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50083-8:2014(Main)
Cable networks for television signals, sound signals and interactive services -- Part 8: Electromagnetic compatibility for networks
EN 50083-8:2013

EN 50083-8 applies to the radiation characteristics and immunity to electromagnetic disturbance of cable networks for television signals, sound signals and interactive services and covers the frequency range 0,15 MHz to 3,5 GHz. It should be noted that measurements below 30 MHz are not generally considered useful in the context of cable networks and are difficult to perform in practice. Application of the harmonized standard EN 50529-2 provides presumption of conformance to the EMC Directive. Therefore, to fulfil the requirements of EN 50529-2, it is necessary to use cable network equipment that satisfies the requirements of EN 50083-2 regarding limits of radiation and of immunity to external fields. This European Standard specifies methods of measurement and EMC performance requirements under operating conditions (in situ) to ensure the ongoing EMC integrity of cable networks. Cable networks beyond the system outlets (e.g. the receiver lead, in simplest terms) which begin at the system outlet and end at the input to the subscriber's terminal equipment are not covered by the standard EN 50083-8. Requirements for the electromagnetic compatibility of receiver leads are laid down in EN 60966-2-4, EN 60966-2-5 and EN 60966-2-6. Cable networks and a wide range of radio services have to coexist. These include for example the emergency services, safety of life, broadcasting, aeronautical, radio navigation services and also land mobile, amateur and cellular radio services. Frequency ranges of typical safety of life services are listed in Annex B. Additional protection for certain services may be required by national regulations.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50083-2:2012(Main)
Cable networks for television signals, sound signals and interactive services -- Part 2: Electromagnetic compatibility for equipment
EN 50083-2:2012

1.1   General
Standards of the EN 50083 and EN 60728 series deal with cable networks including equipment and associated methods of measurement for headend reception, processing and distribution of television signals, sound signals and their associated data signals and for processing, interfacing and transmitting all kinds of signals for interactive services using all applicable transmission media.
This includes
•   CATV-networks  ),
•   MATV-networks and SMATV-networks,
•   individual receiving networks
and all kinds of equipment, systems and installations installed in such networks.
The extent of this standardisation work is from the antennas and/or special signal source inputs to the headend or other interface points to the network up to the terminal input.
The standardisation of any user terminals (i.e., tuners, receivers, decoders, multimedia terminals, etc.) as well as of any coaxial, balanced and optical cables and accessories thereof is excluded.
1.2   Specific scope of EN 50083 2
This European Standard
•   applies to the radiation characteristics and immunity to electromagnetic disturbance of EM active equipment (active and passive equipment) for the reception, processing and distribution of television, sound and interactive multimedia signals as dealt with in the following parts of EN 50083 or EN 60728 series:
–   EN 60728-3   "Active wideband equipment for cable networks";
–   EN 60728-4   "Passive wideband equipment for coaxial cable networks";
–   EN 60728-5   "Headend equipment";
–   EN 60728-6   "Optical equipment";
•   covers the following frequency ranges:
disturbance voltage injected into the mains   150 kHz to 30 MHz;
radiation from active equipment    5 MHz to 25 GHz;
immunity of active equipment   150 kHz to 25 GHz  );
screening effectiveness of passive equipment   5 MHz to 3,5 GHz    (25 GHz)  );
•   specifies requirements for maximum allowed radiation, minimum immunity and minimum screening effectiveness;
•   describes test methods for conformance testing.

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    57 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50083-2:2012/oprA2:2019(Amendment)
Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment
EN 50083-2:2012/prA2

Amend EN 50083-2:2012 to tighten requirements regarding performance criteria in subclause 4.4 and update the normative references

  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 12349:2023(Main)
Mechanical vibration - Guide to the health effects of vibration on the human body
CEN/TR 12349:2023

The aim of this CEN report is to provide information on the possible adverse health effects caused by exposure to vibration at work.  the report addresses manufacturers as well as employers and employees using vibrating machinery in order to improve their understanding of the possible health problems arising from occupational exposure to vibration.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80004-1:2023(Main)
Nanotechnologies - Vocabulary - Part 1: Core vocabulary (ISO 80004-1:2023)
EN ISO 80004-1:2023

This document defines core terms in the field of nanotechnology. This document is intended to facilitate communication between organizations and individuals in industry and those who interact with them.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day