iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 420:2003/AC:2007

(Amendment)

Protective gloves - General requirements and test methods

Protective gloves - General requirements and test methods

CMC - Replace figures in Table C.1 (editorial error)

Schutzhandschuhe - Allgemeine Anforderungen und Prüfverfahren

Gants de protection - Exigences générales et méthodes d'essai

Varovalne rokavice - Splošne zahteve in preskusne metode

General Information

Status
Withdrawn
Publication Date
28-Feb-2007
Withdrawal Date
16-Nov-2009
ICS
13.340.40 - Hand and arm protection
Technical Committee
OVP - Personal protecting equipment
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
17-Nov-2009
Due Date
10-Dec-2009
Completion Date
17-Nov-2009
Directive
89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
93/68/EEC - Council Directive amending Dir. 87/404/EEC (simple pressure vessels), 88/378/EEC (safety of toys), 89/106/EEC (construction products), 89/336/EEC (electromagnetic compatibility), 89/392/EEC (machinery), 89/686/EEC (personal protective equipment), 90/384/EEC (automatic weighing instruments), 90/385/EEC (active implantable medicinal devices), 90/396/EEC (appliances burning gaseous fuels), 91/263/EEC (telecommunications terminal equipment), 92/42/EEC and 73/23/EEC
93/95/EEC - Personal protective equipment (Dir. 89/686/EEC amendment)
96/58/EC - Personal protective equipment (Dir. 89/686/EEC amendment)
Mandate
M/031 - Standardization mandate to CEN/CENELEC concerning standards for Personal Protective Equipment
Ref Project
EN 420:2003/AC:2006 - Protective gloves - General requirements and test methods

Relations

Consolidated By
SIST EN 420:2003+A1:2010 - Protective gloves - General requirements and test methods
Effective Date
18-Jan-2023
Consolidated By
SIST EN 420:2003+A1:2010 - Protective gloves - General requirements and test methods
Effective Date
19-Jan-2023
Consolidated By
SIST EN 420:2003+A1:2010 - Protective gloves - General requirements and test methods
Effective Date
01-Jan-2010
Corrects
SIST EN 420:2003 - Protective gloves - General requirements and test methods
Effective Date
22-Dec-2008

Buy Standard

EN 420:2003/AC:2007EN 420:2003/AC:2007
PreviousNext
Corrigendum
EN 420:2003/AC:2007
English and French language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Protective gloves - General requirements and test methodsVarovalne rokavice - Splošne zahteve in preskusne metodeGants de protection - Exigences générales et méthodes d'essaiSchutzhandschuhe - Allgemeine Anforderungen und PrüfverfahrenTa slovenski standard je istoveten z:EN 420:2003/AC:2006SIST EN 420:2003/AC:2007en,fr13.340.40Protective glovesICS:SLOVENSKI
STANDARDSIST EN 420:2003/AC:200701-marec-2007







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 420:2003/ACNovember 2006Novembre 2006November 2006ICS 13.340.40English versionVersion FrançaiseDeutsche FassungProtective gloves - General requirements and test methodsGants de protection - Exigences généraleset méthodes d'essaiSchutzhandschuhe - AllgemeineAnforderungen und PrüfverfahrenThis corrigendum becomes effective on 29 November 2006 for incorporation in the official Englishand French versions of the EN.Ce corrigendum prendra effet le 29 novembre 2006 pour incorporation d
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST-TP CEN ISO/TR 8546:2022(Main)
Hand protection - Guidance for selection and use (ISO/TR 8546:2022)
CEN ISO/TR 8546:2022

This document gives information on the selection and use of personal protective equipment for the hand protection. The application of this Technical Report requires that the risk assessment has been carried out and the hazards have been minimized accordingly through substitution and technical and organizational measures.
On this basis, this Technical Report contains information that supports employers in counteracting certain risks to hands that could not be sufficiently reduced by substitution and technical and organizational measures by selecting and using suitable protective gloves.
This Technical Report provides explanations on selection, usage and training applicable to protective gloves.  The explanations concerning specific hazards are provided in Annexes.  
This guide considers the following risks:
   mechanical,
   chemical,
   biological,
   thermal,
   electrostatic discharge.
   ionizing radiation
   radioactive contamination
This guide does not cover other risks, because pertinent international or national publications are available or because the relevant information was not available in ISO/TC 94/SC 13/WG 8. Risks not covered include e.g.:
   cuts and stabs by hand knives
   use of chain saws (covered by ISO 11393-4, Annex A)
   animal bites
   needlesticks
   electrocution
   optical radiation
   vibrations
   electric fault arcs
   firefighting (covered by ISO/TR 21808)
   sport.

  • Technical report
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 407:2020(Main)
Protective gloves and other hand protective equipments against thermal risks (heat and/or fire)
EN 407:2020

This European Standard specifies requirements, test methods, marking and information for protective gloves against heat and/or flame and hands protective equipment against domestic thermal risks.
It should be used for all gloves and hands protective equipment which protect the hands or part of the hand against heat and/or flame in one or more of the following forms: flame, contact heat, convective heat, radiant heat, small splashes or large quantities of molten metal.
This standard is only applicable in conjunction with EN 420.
There are other standards relevant to specific applications, as for example fire-fighting or welding.
Product tests may only give performance levels and not protection levels.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20320:2020(Main)
Protective clothing for use in Snowboarding - Wrist Protectors - Requirements and test methods (ISO 20320:2020)
EN ISO 20320:2020

This European Standard specifies the requirements and test methods for ergonomics,
innocuousness, comfort/sizing, restraint, strength, abrasion, impact performance, (bending)stiffness as well as
provisions for marking and instructions supplied by the manufacturer for wrist protectors (hereinafter referred
to as protectors) for all users of snowboard equipment.
lt does not apply to protectors used in roller sports as well as roller sports hockey or alpine skiing.
NOTE 1 The requirements of a clause take precedent over figures.
NOTE 2 The intent of this standard is to specify performance requirements of wrist protectors needed to
reduce the risk of direct injury to the wrist caused by contact of the ground within the protective zone of the
wrist protectors.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21420:2020(Main)
Protective gloves - General requirements and test methods (ISO 21420:2020)
EN ISO 21420:2020

This standard defines the general requirements and relevant test procedures for glove design and construction, resistance of glove materials to water penetration, innocuousness, comfort and efficiency, marking and information supplied by the manufacturer applicable to all protective gloves.
NOTE   It can also be applicable to arm protectors and gloves permanently incorporated in containment enclosures.
This European Standard does not address the protective properties of gloves and therefore should not be used alone but only in combination with the appropriate specific European Standard(s).
A non exhaustive list of these standards is given in the Bibliography.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 374-2:2020(Main)
Protective gloves against dangerous chemicals and micro-organisms - Part 2: Determination of resistance to penetration (ISO 374-2:2019)
EN ISO 374-2:2019

This Standard specifies a test method for the penetration resistance of gloves that protect against
dangerous chemicals and/or micro-organisms.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 374-4:2020(Main)
Protective gloves against dangerous chemicals and micro-organisms - Part 4: Determination of resistance to degradation by chemicals (ISO 374-4:2019)
EN ISO 374-4:2019

This document specifies the test method for the determination of the resistance of protective glove materials to Degradation by dangerous chemicals with continuous contact.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11393-4:2019(Main)
Protective clothing for users of hand-held chainsaws - Part 4: Performance requirements and test methods for protective gloves (ISO 11393-4:2018)
EN ISO 11393-4:2019

This part of ISO 11393 specifies the requirements and test methods for gloves that are intended to provide protection against cuts by a hand-held chain-saw, including requirements for identification, marking and information for the user. The method for measurement of protective coverage, the apparatus and the test method for assessing resistance to cutting, and the ergonomic assessment are specified. An informative
annex on risk analysis, glove ergonomics and glove selection is provided.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 388:2016+A1:2019(Main)
Protective gloves against mechanical risks
EN 388:2016+A1:2018

This European Standard specifies requirements, test methods, marking and information to be supplied for protective gloves against the mechanical risks of abrasion, blade cut, tear, puncture and, if applicable, impact.
This standard is intended to be used in conjunction with EN 420.
The test methods developed in this standard may also be applicable to arm protectors.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 374-1:2017/A1:2018(Amendment)
Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks - Amendment 1 (ISO 374-1:2016/Amd 1:2018)
EN ISO 374-1:2016/A1:2018

2021-01-12-JO-Formal Objection for the OJEU citation in support of the PPE Regulation

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 374-5:2017(Main)
Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements for micro-organisms risks (ISO 374-5:2016)
EN ISO 374-5:2016

This European Standard specifies a test method for the penetration resistance of gloves that protect against
micro-organisms.
NOTE If other protection features should be needed, e.g. chemical risks, mechanical risks , thermal risks ,
electrostatic dissipation etc., the appropriate specific performance standard, e.g. EN 374-1, EN 388, EN 407,
EN 16350 etc., should be used.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day