SIST EN 302 435-2 V1.3.1:2010
(Main)Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices (SRD) - Technical characteristics for SRD equipment using Ultra WideBand technology (UWB) - Building Material Analysis and Classification equipment applications operating in the frequency band from 2,2 GHz to 8,5 GHz - Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
- Abstract
The present document specifies the requirements for Building Material Analysis and Classification (BMA) applications using UWB technology operating in all or part of the frequency band from 2,2 GHz to 8,5 GHz. Additionally it specifies reduced emissions in the ranges from 0,96 GHz to 2,2 GHz and 8,5 GHz to 10,6 GHz. Equipment covered by the present document operates in accordance with amended ECC Decision ECC/DEC(07)01 on specific Material Sensing devices using Ultra-Wideband (UWB) technology (amended 26 June 2009) [3] and Commission Decision of 21 April 2009 [i.5] amending Decision 2007/131/EC [2] on allowing the use of the radio spectrum for equipment using ultra-wideband technology in a harmonized manner in the Community (notified under document number C(2009) 2787) (2009/343/EC) [i.5].
The present document applies to:
UWB building material analysis and classification equipment for imaging and object detection applications;
equipment fitted with an integral antenna;
handheld devices.
The present document does not apply to:
UWB communication devices;
Ground penetrating radar devices; nor
Through-wall radar imaging devices;
as defined in ITU-R Recommendation SM.1754 [i.3].
The present document specifies the equipment which is designed to not radiate into the free space. It is designed to function only when positioned such that it radiates directly into the absorptive material such as walls and other building materials which absorb emissions. The present document does not necessarily include all the characteristics which may be required by a user, nor does it necessarily represent the optimum performance achievable. The present document is intended to cover the provisions of article 3.2 of Directive 1999/5/EC [i.2] (R&TTE Directive), which states that "... radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radiocommunications and orbital resources so as to avoid harmful interference".
- Status
- Published
- Publication Date
- 18-Jan-2010
- Technical Committee
- MOC - Mobile Communications
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 18-Dec-2009
- Due Date
- 22-Feb-2010
- Completion Date
- 19-Jan-2010
- Mandate
- M/329
Buy Documents
ETSI EN 302 435-2 V1.3.1 (2009-08) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Technical characteristics for SRD equipment using Ultra WideBand technology (UWB); Building Material Analysis and Classification equipment applications operating in the frequency band from 2,2 GHz to 8,5 GHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
ETSI EN 302 435-2 V1.3.1 (2009-12) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Technical characteristics for SRD equipment using Ultra WideBand technology (UWB); Building Material Analysis and Classification equipment applications operating in the frequency band from 2,2 GHz to 8,5 GHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
SIST EN 302 435-2 V1.3.1:2010 is the SIST adoption of ETSI EN 302 435-2 V1.3.1, a Harmonized European Standard from ETSI for Ultra WideBand (UWB) short range devices used in Building Material Analysis and Classification (BMA). It specifies the radio-spectrum and conformance requirements, together with the related test approach, for equipment used to image or detect objects in building materials and for demonstrating conformity under article 3.2 of the R&TTE Directive.
What does SIST EN 302 435-2 V1.3.1:2010 specify?
SIST EN 302 435-2 V1.3.1:2010 specifies requirements for BMA applications using UWB technology in all or part of the 2.2 GHz to 8.5 GHz band. It also sets reduced-emission requirements for the adjacent ranges from 0.96 GHz to 2.2 GHz and from 8.5 GHz to 10.6 GHz.
The standard applies to UWB BMA equipment for imaging and object detection, equipment with an integral antenna, and handheld devices. It is written for equipment intended to operate against absorptive materials such as walls and other building materials, rather than radiating freely into open space.
It does not apply to UWB communication devices, ground penetrating radar devices, or through-wall radar imaging devices as defined in ITU-R Recommendation SM.1754.
| Annex | What it covers |
|---|---|
| A | HS Requirements and conformance Test specifications Table (HS-RTT) |
| B | The EN title in the official languages |
| C | Bibliography |
The document is Part 2 of a multi-part deliverable. Part 1 provides the technical characteristics and test methods that Part 2 cross-references.
What are the key requirements of SIST EN 302 435-2 V1.3.1:2010?
Emissions limits and operating profile
Clause 4.1 requires the provider to declare an environmental profile, and the equipment must meet the technical requirements within that declared operating range. In practice, the manufacturer has to define the conditions under which the device is claimed to work and verify compliance there.
Clause 4.2.1 sets the transmitter requirements by referring to the detailed limits in EN 302 435-1. The main categories are Maximum Undesired UWB Emissions (UE), Maximum Other Emissions (OE), and Total Power spectral density (UE-TP).
For impulsive UWB technology, clause 4.2.1.4 adds a minimum pulse repetition frequency requirement and requires the related declaration from EN 302 435-1. This matters because some devices are only covered if they use that impulsive mode.
Design and access control
Clause 4.2.2.1 requires compliance with the design requirements in annex B of EN 302 435-1. That pushes the manufacturer to follow the companion standard’s design constraints, not only its emission limits.
Clause 4.2.2.2 covers Listen before Talk (LBT) receiver thresholds for equipment operating in bands where LBT applies. In practice, this means the device must check the channel in the way required before it transmits.
Testing and conformity mapping
Clause 5.1 requires testing at representative points within the declared environmental profile. Where performance changes with temperature or other conditions, testing has to cover enough of those conditions to support confidence in compliance.
Clause 5.2 identifies the essential radio test suites for UE, OE, UE-TP, and LBT by cross-reference to EN 302 435-1. Clause 5.3 says measurement results are interpreted according to clause 7 of EN 302 435-1.
Annex A is important for conformity work because it maps each requirement to its test specification and marks requirements as unconditional or conditional. It also shows which tests are part of the Essential Radio Test Suite, which helps labs and assessors decide what must be demonstrated for presumption of conformity.
What terms does SIST EN 302 435-2 V1.3.1:2010 define?
Clause 3 uses the definitions, symbols, and abbreviations from EN 302 435-1, so this part relies on the companion standard for the formal wording.
- BMA - Building Material Analysis and Classification, meaning UWB applications used to image or detect features in building materials.
- UWB - Ultra WideBand, the radio technology used by the equipment covered by this standard.
- UE - Maximum Undesired UWB Emissions, the limit category for unwanted UWB emissions.
- OE - Maximum Other Emissions, the limit category for emissions outside the intended UWB emission pattern.
- UE-TP - Total Power spectral density for undesired UWB emissions.
- LBT - Listen before Talk, a transmit-control method that checks the channel before use.
- HS-RTT - HS Requirements and conformance Test specifications Table, the cross-reference table in Annex A.
Who uses SIST EN 302 435-2 V1.3.1:2010?
Manufacturers and product engineers use this standard when designing UWB BMA equipment, especially handheld devices with integral antennas. They use it to set the operating profile, control emissions, and decide whether LBT or pulse-repetition requirements apply.
Test laboratories use it to build compliance test plans for transmitter emissions and LBT behavior. Conformity assessment teams and quality managers use Annex A to link requirements to tests and to prepare evidence for presumption of conformity.
It is also relevant to buyers and regulators who need to check whether a device really falls within the BMA UWB scope and not within the excluded radar or communication device categories.
What changed in SIST EN 302 435-2 V1.3.1:2010 from the previous edition?
This publication is V1.3.1. The document history shows V1.2.1 as the earlier version.
Which standards are used with SIST EN 302 435-2 V1.3.1:2010?
- ETSI EN 302 435-1 (V1.3.1) - supplies the technical characteristics, detailed limits, test methods, definitions, and measurement interpretation used throughout this part.
- Commission Decision 2007/131/EC - provides the EU spectrum-use framework for equipment using UWB technology.
- ECC/DEC/(07)01 - gives the ECC decision for specific material sensing devices using UWB technology, as amended on 26 June 2009.
- Commission Decision 2009/343/EC - amends Commission Decision 2007/131/EC for harmonized UWB use in the Community.
- ITU-R Recommendation SM.1754 - provides the definitions used to separate this scope from UWB communication, ground penetrating radar, and through-wall radar imaging devices.
What does the SIST EN 302 435-2 V1.3.1:2010 document contain?
SIST EN 302 435-2 V1.3.1:2010 contains the scope, references, definitions section, technical requirements, and compliance test clauses that map this harmonized standard to article 3.2 of the R&TTE Directive. Clause 4 sets the conformance requirements, and clause 5 mirrors them with the test suites used for compliance checking.
The document also includes Annex A, which is the main requirements-and-tests mapping table for conformity work. Annex B gives the title in official languages, and Annex C provides a short bibliography for background reading on UWB sensor applications and measurement uncertainty.
Buy Documents
ETSI EN 302 435-2 V1.3.1 (2009-08) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Technical characteristics for SRD equipment using Ultra WideBand technology (UWB); Building Material Analysis and Classification equipment applications operating in the frequency band from 2,2 GHz to 8,5 GHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
ETSI EN 302 435-2 V1.3.1 (2009-12) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Technical characteristics for SRD equipment using Ultra WideBand technology (UWB); Building Material Analysis and Classification equipment applications operating in the frequency band from 2,2 GHz to 8,5 GHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST EN 302 435-2 V1.3.1:2010 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices (SRD) - Technical characteristics for SRD equipment using Ultra WideBand technology (UWB) - Building Material Analysis and Classification equipment applications operating in the frequency band from 2,2 GHz to 8,5 GHz - Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive". This standard covers: The present document specifies the requirements for Building Material Analysis and Classification (BMA) applications using UWB technology operating in all or part of the frequency band from 2,2 GHz to 8,5 GHz. Additionally it specifies reduced emissions in the ranges from 0,96 GHz to 2,2 GHz and 8,5 GHz to 10,6 GHz. Equipment covered by the present document operates in accordance with amended ECC Decision ECC/DEC(07)01 on specific Material Sensing devices using Ultra-Wideband (UWB) technology (amended 26 June 2009) [3] and Commission Decision of 21 April 2009 [i.5] amending Decision 2007/131/EC [2] on allowing the use of the radio spectrum for equipment using ultra-wideband technology in a harmonized manner in the Community (notified under document number C(2009) 2787) (2009/343/EC) [i.5]. The present document applies to: UWB building material analysis and classification equipment for imaging and object detection applications; equipment fitted with an integral antenna; handheld devices. The present document does not apply to: UWB communication devices; Ground penetrating radar devices; nor Through-wall radar imaging devices; as defined in ITU-R Recommendation SM.1754 [i.3]. The present document specifies the equipment which is designed to not radiate into the free space. It is designed to function only when positioned such that it radiates directly into the absorptive material such as walls and other building materials which absorb emissions. The present document does not necessarily include all the characteristics which may be required by a user, nor does it necessarily represent the optimum performance achievable. The present document is intended to cover the provisions of article 3.2 of Directive 1999/5/EC [i.2] (R&TTE Directive), which states that "... radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radiocommunications and orbital resources so as to avoid harmful interference".
The present document specifies the requirements for Building Material Analysis and Classification (BMA) applications using UWB technology operating in all or part of the frequency band from 2,2 GHz to 8,5 GHz. Additionally it specifies reduced emissions in the ranges from 0,96 GHz to 2,2 GHz and 8,5 GHz to 10,6 GHz. Equipment covered by the present document operates in accordance with amended ECC Decision ECC/DEC(07)01 on specific Material Sensing devices using Ultra-Wideband (UWB) technology (amended 26 June 2009) [3] and Commission Decision of 21 April 2009 [i.5] amending Decision 2007/131/EC [2] on allowing the use of the radio spectrum for equipment using ultra-wideband technology in a harmonized manner in the Community (notified under document number C(2009) 2787) (2009/343/EC) [i.5]. The present document applies to: UWB building material analysis and classification equipment for imaging and object detection applications; equipment fitted with an integral antenna; handheld devices. The present document does not apply to: UWB communication devices; Ground penetrating radar devices; nor Through-wall radar imaging devices; as defined in ITU-R Recommendation SM.1754 [i.3]. The present document specifies the equipment which is designed to not radiate into the free space. It is designed to function only when positioned such that it radiates directly into the absorptive material such as walls and other building materials which absorb emissions. The present document does not necessarily include all the characteristics which may be required by a user, nor does it necessarily represent the optimum performance achievable. The present document is intended to cover the provisions of article 3.2 of Directive 1999/5/EC [i.2] (R&TTE Directive), which states that "... radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radiocommunications and orbital resources so as to avoid harmful interference".
SIST EN 302 435-2 V1.3.1:2010 is classified under the following ICS (International Classification for Standards) categories: 33.060.20 - Receiving and transmitting equipment; 33.100.01 - Electromagnetic compatibility in general. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 302 435-2 V1.3.1:2010 is associated with the following European legislation: EU Directives/Regulations: 1999/5/EC, TRRTP124; Standardization Mandates: M/329. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 302 435-2 V1.3.1:2010 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
Final draft ETSI EN 302 435-2 V1.3.1 (2009-08)
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Short Range Devices (SRD);
Technical characteristics for SRD equipment using
Ultra WideBand technology (UWB);
Building Material Analysis and Classification equipment applications
operating in the frequency band from 2,2 GHz to 8,5 GHz;
Part 2: Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive
2 Final draft ETSI EN 302 435-2 V1.3.1 (2009-08)
Reference
REN/ERM-TGUWB-006-2
Keywords
radio, SRD, UWB, testing, regulation
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2009.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 Final draft ETSI EN 302 435-2 V1.3.1 (2009-08)
Contents
Intellectual Property Rights . 4
Foreword . 4
Introduction . 4
1 Scope . 5
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definitions, symbols and abbreviations . 7
3.1 Definitions . 7
3.2 Symbols . 7
3.3 Abbreviations . 7
4 Technical requirements specifications . 7
4.1 Environmental profile . 7
4.2 Conformance requirements . 7
4.2.1 Transmitter requirements . 7
4.2.1.1 Maximum Undesired UWB Emissions (UE) . 7
4.2.1.2 Maximum Other Emissions (OE) . 7
4.2.1.3 Total Power spectral density (UE-TP) . 7
4.2.1.4 Minimum pulse repetition frequency . 7
4.2.2 Other equipment requirements . 7
4.2.2.1 Design requirements. 7
4.2.2.2 Listen before Talk . 8
5 Testing for compliance with technical requirements . 8
5.1 Environmental conditions for testing . 8
5.2 Essential radio test suites . 8
5.2.1 Transmitter test suites . 8
5.2.1.1 Maximum Undesired UWB Emissions (UE) . 8
5.2.1.2 Maximum Other Emissions (OE) . 8
5.2.1.3 Total Power spectral density (UE-TP) . 8
5.2.2 Other test suites . 8
5.2.2.1 Listen before Talk . 8
5.3 Interpretation of measurement results . 8
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 9
Annex B (informative): The EN title in the official languages . 11
Annex C (informative): Bibliography . 12
History . 13
ETSI
4 Final draft ETSI EN 302 435-2 V1.3.1 (2009-08)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM), and is now submitted for the ETSI standards One-
step Approval Procedure.
The present document is part 2 of a multi-part deliverable covering Ultra WideBand (UWB) Building Material
Analysis (BMA) and Classification equipment applications operating in the frequency band from 2,2 GHz to 8 GHz, as
identified below:
Part 1: "Technical characteristics and test methods";
Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive".
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [i.4] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [i.2] of the European Parliament
and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
Technical specifications relevant to Directive 1999/5/EC [i.2] are given in annex A.
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive. The modular
structure is shown in EG 201 399 [i.1].
ETSI
5 Final draft ETSI EN 302 435-2 V1.3.1 (2009-08)
1 Scope
The present document specifies the requirements for Building Material Analysis and Classification (BMA) applications
using UWB technology operating in all or part of the frequency band from 2,2 GHz to 8,5 GHz. Additionally it
specifies reduced emissions in the ranges from 0,96 GHz to 2,2 GHz and 8,5 GHz to 10,6 GHz.
Equipment covered by the present document operates in accordance with amended ECC Decision ECC/DEC(07)01 on
specific Material Sensing devices using Ultra-Wideband (UWB) technology (amended 26 June 2009) [3] and
Commission Decision of 21 April 2009 [i.5] amending Decision 2007/131/EC [2] on allowing the use of the radio
spectrum for equipment using ultra-wideband technology in a harmonized manner in the Community (notified under
document number C(2009) 2787) (2009/343/EC) [i.5].
Table 1: Radiocommunications service frequency bands
Radiocommunications service frequency bands
Transmit 2 200 MHz to 8 500 MHz
Receive 2 200 MHz to 8 500 MHz
The present document applies to:
• UWB building material analysis and classification equipment for imaging and object detection applications;
• equipment fitted with an integral antenna;
• handheld devices.
The present document does not apply to:
• UWB communication devices;
• Ground penetrating radar devices; nor
• Through-wall radar imaging devices;
as defined in ITU-R Recommendation SM.1754 [i.3].
The present document specifies the equipment which is designed to not radiate into the free space. It is designed to
function only when positioned such that it radiates directly into the absorptive material such
...
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Short Range Devices (SRD);
Technical characteristics for SRD equipment using
Ultra WideBand technology (UWB);
Building Material Analysis and Classification equipment applications
operating in the frequency band from 2,2 GHz to 8,5 GHz;
Part 2: Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive
2 ETSI EN 302 435-2 V1.3.1 (2009-12)
Reference
REN/ERM-TGUWB-006-2
Keywords
radio, SRD, UWB, testing, regulation
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2009.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 ETSI EN 302 435-2 V1.3.1 (2009-12)
Contents
Intellectual Property Rights . 4
Foreword . 4
Introduction . 4
1 Scope . 5
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definitions, symbols and abbreviations . 7
3.1 Definitions . 7
3.2 Symbols . 7
3.3 Abbreviations . 7
4 Technical requirements specifications . 7
4.1 Environmental profile . 7
4.2 Conformance requirements . 7
4.2.1 Transmitter requirements . 7
4.2.1.1 Maximum Undesired UWB Emissions (UE) . 7
4.2.1.2 Maximum Other Emissions (OE) . 7
4.2.1.3 Total Power spectral density (UE-TP) . 7
4.2.1.4 Minimum pulse repetition frequency . 7
4.2.2 Other equipment requirements . 7
4.2.2.1 Design requirements. 7
4.2.2.2 Listen before Talk . 8
5 Testing for compliance with technical requirements . 8
5.1 Environmental conditions for testing . 8
5.2 Essential radio test suites . 8
5.2.1 Transmitter test suites . 8
5.2.1.1 Maximum Undesired UWB Emissions (UE) . 8
5.2.1.2 Maximum Other Emissions (OE) . 8
5.2.1.3 Total Power spectral density (UE-TP) . 8
5.2.2 Other test suites . 8
5.2.2.1 Listen before Talk . 8
5.3 Interpretation of measurement results . 8
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 9
Annex B (informative): The EN title in the official languages . 11
Annex C (informative): Bibliography . 12
History . 13
ETSI
4 ETSI EN 302 435-2 V1.3.1 (2009-12)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document is part 2 of a multi-part deliverable covering Ultra WideBand (UWB) Building Material
Analysis (BMA) and Classification equipment applications operating in the frequency band from 2,2 GHz to 8 GHz, as
identified below:
Part 1: "Technical characteristics and test methods";
Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive".
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [i.4] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [i.2] of the European Parliament
and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
Technical specifications relevant to Directive 1999/5/EC [i.2] are given in annex A.
National transposition dates
Date of adoption of this EN: 7 December 2009
Date of latest announcement of this EN (doa): 31 March 2010
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 September 2010
Date of withdrawal of any conflicting National Standard (dow): 30 September 2011
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive. The modular
structure is shown in EG 201 399 [i.1].
ETSI
5 ETSI EN 302 435-2 V1.3.1 (2009-12)
1 Scope
The present document specifies the requirements for Building Material Analysis and Classification (BMA) applications
using UWB technology operating in all or part of the frequency band from 2,2 GHz to 8,5 GHz. Additionally it
specifies reduced emissions in the ranges from 0,96 GHz to 2,2 GHz and 8,5 GHz to 10,6 GHz.
Equipment covered by the present document operates in accordance with amended ECC Decision ECC/DEC(07)01 on
specific Material Sensing devices using Ultra-Wideband (UWB) technology (amended 26 June 2009) [3] and
Commission Decision of 21 April 2009 [i.5] amending Decision 2007/131/EC [2] on allowing the use of the radio
spectrum for equipment using ultra-wideband technology in a harmonized manner in the Community (notified under
document number C(2009) 2787) (2009/343/EC) [i.5].
Table 1: Radiocommunications service frequency bands
Radiocommunications service frequency bands
Transmit 2 200 MHz to 8 500 MHz
Receive 2 200 MHz to 8 500 MHz
The present document applies to:
• UWB building material analysis and classification equipment for imaging and object detection applications;
• equipment fitted with an integral antenna;
• handheld devices.
The present document does not apply to:
• UWB communication devices;
• Ground penetrating radar devices; nor
• Through-wall radar imaging devices;
as defined in ITU-R Recommendation SM.1754 [i.3].
The present document specifies the equipment which is designed to not radiate into the free space. It is designed to
function only when positioned such that it radiates directly into the absorptive material such as walls and other buildi
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.577(Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices (SRD) - Technical characteristics for SRD equipment using Ultra WideBand technology (UWB) - Building Material Analysis and Classification equipment applications operating in the frequency band from 2,2 GHz to 8,5 GHz - Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipmentICS:Ta slovenski standard je istoveten z:EN 302 435-2 Version 1.3.1SIST EN 302 435-2 V1.3.1:2010en01-februar-2010SIST EN 302 435-2 V1.3.1:2010SLOVENSKI
STANDARD
ETSI ETSI EN 302 435-2 V1.3.1 (2009-12) 2
Reference REN/ERM-TGUWB-006-2 Keywords radio, SRD, UWB, testing, regulation ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2009. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. LTE™ is a Trade Mark of ETSI currently being registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 302 435-2 V1.3.1:2010
ETSI ETSI EN 302 435-2 V1.3.1 (2009-12) 3 Contents Intellectual Property Rights . 4 Foreword . 4 Introduction . 4 1 Scope . 5 2 References . 6 2.1 Normative references . 6 2.2 Informative references . 6 3 Definitions, symbols and abbreviations . 7 3.1 Definitions . 7 3.2 Symbols . 7 3.3 Abbreviations . 7 4 Technical requirements specifications . 7 4.1 Environmental profile . 7 4.2 Conformance requirements . 7 4.2.1 Transmitter requirements . 7 4.2.1.1 Maximum Undesired UWB Emissions (UE) . 7 4.2.1.2 Maximum Other Emissions (OE) . 7 4.2.1.3 Total Power spectral density (UE-TP) . 7 4.2.1.4 Minimum pulse repetition frequency . 7 4.2.2 Other equipment requirements . 7 4.2.2.1 Design requirements. 7 4.2.2.2 Listen before Talk . 8 5 Testing for compliance with technical requirements . 8 5.1 Environmental conditions for testing . 8 5.2 Essential radio test suites . 8 5.2.1 Transmitter test suites . 8 5.2.1.1 Maximum Undesired UWB Emissions (UE) . 8 5.2.1.2 Maximum Other Emissions (OE) . 8 5.2.1.3 Total Power spectral density (UE-TP) . 8 5.2.2 Other test suites . 8 5.2.2.1 Listen before Talk . 8 5.3 Interpretation of measurement results . 8 Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) . 9 Annex B (informative): The EN title in the official languages . 11 Annex C (informative): Bibliography . 12 History . 13
ETSI ETSI EN 302 435-2 V1.3.1 (2009-12) 4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document is part 2 of a multi-part deliverable covering Ultra WideBand (UWB) Building Material Analysis (BMA) and Classification equipment applications operating in the frequency band from 2,2 GHz to 8 GHz, as identified below: Part 1: "Technical characteristics and test methods"; Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive". The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC [i.4] (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the Directive 1999/5/EC [i.2] of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity ("the R&TTE Directive"). Technical specifications relevant to Directive 1999/5/EC [i.2] are given in annex A.
National transposition dates Date of adoption of this EN: 7 December 2009 Date of latest announcement of this EN (doa): 31 March 2010 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
30 September 2010 Date of withdrawal of any conflicting National Standard (dow): 30 September 2011
Introduction The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive. The modular structure is shown in EG 201 399 [i.1]. SIST EN 302 435-2 V1.3.1:2010
ETSI ETSI EN 302 435-2 V1.3.1 (2009-12) 5 1 Scope The present document specifies the requirements for Building Material Analysis and Classification (BMA) applications using UWB technology operating in all or part of the frequency band from 2,2 GHz to 8,5 GHz. Additionally it specifies reduced emissions in the ranges from 0,96 GHz to 2,2 GHz and 8,5 GHz to 10,6 GHz.
Equipment covered by the present document operates in accordance with amended ECC Decision ECC/DEC(07)01 on specific Material Sensing devices using Ultra-Wideband (UWB) technology (amended 26 June 2009) [3] and Commission Decision of 21 April 2009 [i.5] amending Decision 2007/131/EC [2] on allowing the use of the radio spectrum for equipment using ultra-wideband technology in a harmonized manner in the Community (notified under document number C(2009) 2787) (2009/343/EC) [i.5]. Table 1: Radiocommunications service frequency bands
Radiocommunications service frequency bands Transmit 2 200 MHz to 8 500 MHz Receive 2 200 MHz to 8 500 MHz
The present document applies to: • UWB building material analysis and classification equipment for imaging and object dete
...