SIST EN 12316-1:2000
(Main)Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of peel resistance of joints
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of peel resistance of joints
This European Standard specifies a test method for determining the resistance to peeling of joints between two adjacent sheets of the same bitumen-based roofing sheets. This European Standard is to be used for testing the joints in mechanically fastened single layer bitumen roofing. It is not designed for testing fully bonded or multilayer built up roofing.
Abdichtungsbahnen - Teil 1: Bitumenbahnen für Dachabdichtungen - Bestimmung des Schälwiderstandes der Fügenähte
Diese Europäische Norm legt ein Verfahren für die Bestimmung des Schälwiderstandes einer Fügenaht zwischen zwei angrenzenden Bitumen-Dachdichtungsbahnen gleichen Typs fest. Dieses Verfahren hat die Prüfung der Fügenähte mechanisch befestigter einlagiger Abdichtungen auf Bitumenbasis zum Gegenstand.
Feuilles souples d'étanchéité - Partie 1: Feuilles d'étanchéité de toiture bitumeuses - Détermination de la résistance au pelage des joints
Cette Norme Européenne décrit une méthode pour la détermination de la résistance au pelage des joints formés entre deux feuilles adjacentes, constituées du même type de feuilles bitumineuses. Cette méthode d'essai est destinée à être utilisée pour tester les joints des feuilles bitumineuses pour l'étanchéité de toiture appliquées en monocouche avec fixations mécaniques.
Hidroizolacijski trakovi - 1. del: Bitumenski trakovi za tesnjenje streh - Določevanje odpornosti proti razslojevanju spojev
General Information
- Status
- Published
- Publication Date
- 31-May-2000
- Technical Committee
- VLA - Water proofing
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Jun-2000
- Due Date
- 01-Jun-2000
- Completion Date
- 01-Jun-2000
- Directive
- 89/106/EEC - Construction products
Overview
SIST EN 12316-1:2000 is a European standard developed by CEN that specifies the method for determining the peel resistance of joints in bitumen sheets used for roof waterproofing. This test method is crucial for assessing the durability and integrity of joints between mechanically fastened single-layer bitumen-based roofing sheets. The standard does not cover testing for fully bonded or multilayer built-up roofing systems.
By providing a standardized approach, SIST EN 12316-1:2000 helps manufacturers, contractors, and quality inspectors ensure that the joints in bitumen roofing membranes meet essential performance criteria for peel resistance, which directly impacts the waterproofing reliability of roofs.
Key Topics
Scope of Application
The standard specifically applies to mechanically fastened single-layer bitumen sheets used in roofing waterproofing. It excludes multi-layer or fully adhered bitumen roofing membranes.Peel Resistance Testing
The core focus is on measuring the resistance to peeling forces at joints between two adjacent bitumen sheets. This is a critical factor affecting the sealing quality and longevity of roof waterproofing systems.Test Methodology
SIST EN 12316-1:2000 outlines a precise test procedure including sample preparation, testing conditions, and peel force measurement. This ensures reliable and repeatable results across different laboratories and installations.Materials Covered
The standard applies to flexible bitumen sheets designed for roof waterproofing purposes, classified under binders and sealing materials.
Applications
Roof Waterproofing Quality Control
Manufacturers and installers use this standard to verify that bitumen sheet joints have sufficient peel resistance to withstand environmental stresses such as wind uplift and thermal expansion.Product Development and Certification
Bitumen sheet producers rely on SIST EN 12316-1:2000 test results to develop products that comply with European waterproofing performance requirements and achieve certification.Construction and Maintenance
Building contractors and maintenance teams apply the standard to assess installed waterproofing membranes, thereby ensuring long-term roof durability and minimizing leakage risks.Regulatory Compliance
Compliance with SIST EN 12316-1:2000 may be required by local or European building codes relevant to roofing materials and methods, supporting harmonized construction standards.
Related Standards
EN 12311-1: Bitumen Sheets for Roofing – Determination of Tensile Properties
Addresses the tensile strength and elongation characteristics of bitumen sheets complementing joint resistance assessment.EN 13501-5: Fire Classification of Roofing Sheets
Provides standards related to fire performance of bitumen roofing membranes.EN 13707: Reinforced Bitumen Membranes
Details specifications for reinforced bitumen membranes typically used in multilayer roofing systems, for which SIST EN 12316-1:2000 is not applicable.ISO 9001: Quality Management Systems
Relevant for manufacturers ensuring consistent quality in waterproofing materials including bitumen sheets.
Keywords: SIST EN 12316-1:2000, bitumen sheets, roof waterproofing, peel resistance, joint testing, mechanically fastened roofing, waterproofing standards, European standard, roofing membranes, peel test method, waterproofing quality control.
Frequently Asked Questions
SIST EN 12316-1:2000 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of peel resistance of joints". This standard covers: This European Standard specifies a test method for determining the resistance to peeling of joints between two adjacent sheets of the same bitumen-based roofing sheets. This European Standard is to be used for testing the joints in mechanically fastened single layer bitumen roofing. It is not designed for testing fully bonded or multilayer built up roofing.
This European Standard specifies a test method for determining the resistance to peeling of joints between two adjacent sheets of the same bitumen-based roofing sheets. This European Standard is to be used for testing the joints in mechanically fastened single layer bitumen roofing. It is not designed for testing fully bonded or multilayer built up roofing.
SIST EN 12316-1:2000 is classified under the following ICS (International Classification for Standards) categories: 91.060.20 - Roofs; 91.100.50 - Binders. Sealing materials. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 12316-1:2000 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/102, M/124. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 12316-1:2000 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Abdichtungsbahnen - Teil 1: Bitumenbahnen für Dachabdichtungen - Bestimmung des Schälwiderstandes der FügenähteFeuilles souples d'étanchéité - Partie 1: Feuilles d'étanchéité de toiture bitumeuses - Détermination de la résistance au pelage des jointsFlexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - D
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...