SIST EN IEC 60684-3-116:2024
(Main)Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 116 and 117: Extruded polychloroprene, general purpose (IEC 60684-3-116:2024)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 116 and 117: Extruded polychloroprene, general purpose (IEC 60684-3-116:2024)
IEC 60684-3-116:2024 is available as IEC 60684-3-116:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60684-3-116:2024 gives the requirements for non-heat-shrinkable sleeving, extruded from compounds based on polychloroprene elastomer. This sleeving has been found suitable for temperatures up to 95 °C. Sleeving of this type is normally available with internal diameters up to 25 mm, and in the following opaque colours: black, brown, red, orange, yellow, green, blue, violet, grey, white and pink. Sizes or colours other than those specifically listed in this document can possibly be available as custom items. These items are considered to comply with this document if they comply with the other property requirements listed in Table 2. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application will be based on the actual requirements necessary for adequate performance in the application and not based on the specification alone. This fourth edition cancels and replaces the third edition published in 2010 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) update of clause references in Table 2;
b) addition of resistance to fluids test.
Isolierschläuche - Teil 3: Anforderungen für einzelne Schlauchtypen - Blätter 116 und 117: Extrudierte Polychloroprenschläuche, Standardtyp (IEC 60684-3-116:2024)
Gaines isolantes souples - Partie 3: Spécifications pour types particuliers de gaines - Feuilles 116 à 117: Polychloroprène extrudé, utilisation générale (IEC 60684-3-116:2024)
IEC 60684-3-116:2024 est disponible sous forme de IEC 60684-3-116:2024 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.
L'IEC 60684-3-116:2024 fournit les exigences relatives aux gaines non thermorétractables, extrudées à partir de composés à base d'élastomère polychloroprène. Ces gaines se sont révélées être adaptées à des températures jusqu'à 95 °C. Les gaines de ce type sont généralement proposées avec des diamètres intérieurs jusqu'à 25 mm et dans les couleurs opaques suivantes: noir, brun, rouge, orange, jaune, vert, bleu, violet, gris, blanc et rose. D'autres dimensions et d'autres couleurs que celles spécifiquement indiquées dans le présent document peuvent être proposées comme articles spéciaux. Ces articles sont considérés comme conformes au présent document s'ils sont conformes aux autres exigences relatives aux propriétés indiquées dans le Tableau 2. Les matériaux conformes à la présente spécification satisfont à des niveaux établis de performance. Toutefois, l'utilisateur choisit le matériau destiné à une application spécifique en se fondant sur les exigences réelles nécessaires pour assurer des performances adéquates dans le cadre de l'application considérée et non sur la spécification seule. Cette quatrième édition annule et remplace la troisième édition parue en 2010, dont elle constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) mise à jour des références aux articles dans le Tableau 2;
b) ajout de l'essai de résistance aux fluides.
Gibke izolacijske cevi - 3. del: Specifikacije za posamezne vrste cevi - 116. in 117. list: Ekstrudirani polipropilen za splošne namene (IEC 60684-3-116:2024)
Ta del standarda IEC 60684 podaja zahteve za toplotno neskrčljive cevi, ekstrudirane iz spojin na osnovi polikloroprenskega elastomera. Take cevi so dokazano primerne za temperature do 95 °C.
Tovrstne cevi so običajno na voljo z notranjim premerom do 25 mm in v naslednjih neprozornih barvah: črna, rjava, rdeča, oranžna, rumena, zelena, modra, vijoličasta, siva, bela in rožnata. Velikosti ali barve, ki niso navedene v tem dokumentu, so lahko na voljo na zahtevo. Ti elementi so skladni s tem dokumentom, če izpolnjujejo druge zahteve glede lastnosti, navedene v preglednici 2.
Materiali, ki so skladni s to specifikacijo, ustrezajo določenim ravnem delovanja. Vendar mora uporabnik material za določeno uporabo izbrati na podlagi dejanskih zahtev za ustrezno delovanje pri taki uporabi, ne le na podlagi same specifikacije.
General Information
Relations
Overview
EN IEC 60684-3-116:2024 - Flexible insulating sleeving (Sheets 116 & 117) specifies requirements for non‑heat‑shrinkable, extruded sleeving made from polychloroprene elastomer for general‑purpose electrical insulation. This fourth edition (replacing the 2010 edition) is harmonized with IEC 60684-3-116:2024 and is published by CLC/CENELEC. The standard covers thin‑wall (Sheet 116) and thick‑wall (Sheet 117) extruded polychloroprene sleeving, normally supplied in internal diameters up to 25 mm and a range of opaque colours.
Key topics and technical requirements
- Material and type: Extruded, non‑heat‑shrinkable sleeving based on polychloroprene elastomer (general purpose).
- Temperature rating: Suitable for service temperatures up to 95 °C.
- Dimensional requirements: Internal diameters and wall thickness limits are specified (see Table 1 of the standard); measurements to nearest 0.05 mm. Non‑standard diameters must meet wall‑thickness rules referenced in the document.
- Colours: Standard opaque colours include black, brown, red, orange, yellow, green, blue, violet, grey, white and pink. Custom colours/sizes may be accepted if they meet the property requirements in Table 2. Colour designation follows IEC 60757 where applicable.
- Performance properties: Property requirements and test criteria are set out (Table 2), including mechanical and physical characteristics specific to the sleeving type.
- Resistance to fluids: This edition adds a resistance to selected fluids test (Table 3), expanding assessment for real‑world contamination exposure. Sample dimensions for this test are in Table 4.
- Conformance & testing: Product qualification is normally based on test results from 10 mm internal diameter sleeving; colour and colour fastness to light are qualified for all colours.
Applications
- Insulation and protection of wires, cables and harnesses in electrical and electronic assemblies.
- General‑purpose protective sleeving where flexible, extruded elastomeric insulation is required up to 95 °C.
- Environments requiring defined dimensional tolerances and fluid resistance (automotive, industrial equipment, consumer appliances, wiring looms).
Who should use this standard
- Manufacturers of insulating sleeving and elastomeric tubing.
- Component and harness OEMs specifying sleeving for assemblies.
- Test laboratories and quality assurance teams performing compliance checks.
- Procurement and compliance officers ensuring supplied parts meet IEC/CENELEC requirements.
Related standards
- IEC 60684-1 (Definitions & general requirements)
- IEC 60684-2 (Methods of test)
- IEC 60068-2-74 (Environmental testing - Fluid contamination)
- IEC 60757 (Code for designation of colours)
- ISO 1817 (Effect of liquids on rubber)
Keywords: EN IEC 60684-3-116:2024, flexible insulating sleeving, extruded polychloroprene, sleeving specifications, electrical insulation, temperature rating, fluid resistance, dimensional requirements.
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2024
Gibke izolacijske cevi - 3. del: Specifikacije za posamezne vrste cevi - 116. in 117.
list: Ekstrudirani polipropilen za splošne namene (IEC 60684-3-116:2024)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving -
Sheets 116 and 117: Extruded polychloroprene, general purpose (IEC 60684-3-
116:2024)
Isolierschläuche - Teil 3: Anforderungen für einzelne Schlauchtypen - Blätter 116 und
117: Extrudierte Polychloroprenschläuche, Standardtyp (IEC 60684-3-116:2024)
Gaines isolantes souples - Partie 3: Spécifications pour types particuliers de gaines -
Feuilles 116 à 117: Polychloroprène extrudé, utilisation générale (IEC 60684-3-
116:2024)
Ta slovenski standard je istoveten z: EN IEC 60684-3-116:2024
ICS:
29.035.20 Plastični in gumeni izolacijski Plastics and rubber insulating
materiali materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 60684-3-116
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2024
ICS 29.035.20 Supersedes EN 60684-3-116:2011
English Version
Flexible insulating sleeving - Part 3: Specifications for individual
types of sleeving - Sheets 116 and 117: Extruded
polychloroprene, general purpose
(IEC 60684-3-116:2024)
Gaines isolantes souples - Partie 3: Spécifications pour Isolierschläuche - Teil 3: Anforderungen für einzelne
types particuliers de gaines - Feuilles 116 et 117: Schlauchtypen - Blätter 116 und 117: Extrudierte
Polychloroprène extrudé, utilisation générale Polychloroprenschläuche, Standardtyp
(IEC 60684-3-116:2024) (IEC 60684-3-116:2024)
This European Standard was approved by CENELEC on 2024-05-01. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60684-3-116:2024 E
European foreword
The text of document 15/1005/CDV, future edition 4 of IEC 60684-3-116, prepared by IEC/TC 15
"Solid electrical insulating materials" was submitted to the IEC-CENELEC parallel vote and approved
by CENELEC as EN IEC 60684-3-116:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-02-01
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-05-01
document have to be withdrawn
This document supersedes EN 60684-3-116:2011 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60684-3-116:2024 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60684-3 series NOTE Approved as EN 60684-3-420 to 422 series
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60684-1 - Flexible insulating sleeving_- Part_1: - -
Definitions and general requirements
IEC 60684-2 2011 Flexible insulating sleeving - Part 2: EN 60684-2 2011
Methods of test
IEC 60068-2-74 1999 Environmental testing - Part 2: Tests - Test EN 60068-2-74 1999
Xc: Fluid contamination
+ A1 2018 + A1 2018
IEC 60757 1983 Code for designation of colours HD 457 S1 1985
ISO 1817 - - -
IEC 60684-3-116 ®
Edition 4.0 2024-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Flexible insulating sleeving –
Part 3: Specifications for individual types of sleeving – Sheets 116 and 117:
Extruded polychloroprene, general purpose
Gaines isolantes souples –
Partie 3: Spécifications pour types particuliers de gaines – Feuilles 116 et 117:
Polychloroprène extrudé, utilisation générale
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.035.20 ISBN 978-2-8322-8515-2
– 2 – IEC 60684-3-116:2024 © IEC 2024
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Designation . 7
5 Requirements . 7
6 Sleeving conformance . 7
Bibliography . 12
Table 1 – Dimensional requirements . 8
Table 2 – Property requirements . 9
Table 3 – Resistance to selected fluids . 10
Table 4 – Sample dimensions for resistance to fluids test . 11
IEC 60684-3-116:2024 © IEC 2024 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FLEXIBLE INSULATING SLEEVING –
Part 3: Specifications for individual types of sleeving –
Sheets 116 and 117: Extruded polychloroprene, general purpose
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) IEC draws attent
...
Frequently Asked Questions
SIST EN IEC 60684-3-116:2024 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 116 and 117: Extruded polychloroprene, general purpose (IEC 60684-3-116:2024)". This standard covers: <!-- NEW! -->IEC 60684-3-116:2024 is available as <a href="https://webstore.iec.ch/publication/93637">IEC 60684-3-116:2024 RLV</a> which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.</br></br>IEC 60684-3-116:2024 gives the requirements for non-heat-shrinkable sleeving, extruded from compounds based on polychloroprene elastomer. This sleeving has been found suitable for temperatures up to 95 °C. Sleeving of this type is normally available with internal diameters up to 25 mm, and in the following opaque colours: black, brown, red, orange, yellow, green, blue, violet, grey, white and pink. Sizes or colours other than those specifically listed in this document can possibly be available as custom items. These items are considered to comply with this document if they comply with the other property requirements listed in Table 2. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application will be based on the actual requirements necessary for adequate performance in the application and not based on the specification alone. This fourth edition cancels and replaces the third edition published in 2010 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) update of clause references in Table 2; b) addition of resistance to fluids test.
<!-- NEW! -->IEC 60684-3-116:2024 is available as <a href="https://webstore.iec.ch/publication/93637">IEC 60684-3-116:2024 RLV</a> which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.</br></br>IEC 60684-3-116:2024 gives the requirements for non-heat-shrinkable sleeving, extruded from compounds based on polychloroprene elastomer. This sleeving has been found suitable for temperatures up to 95 °C. Sleeving of this type is normally available with internal diameters up to 25 mm, and in the following opaque colours: black, brown, red, orange, yellow, green, blue, violet, grey, white and pink. Sizes or colours other than those specifically listed in this document can possibly be available as custom items. These items are considered to comply with this document if they comply with the other property requirements listed in Table 2. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application will be based on the actual requirements necessary for adequate performance in the application and not based on the specification alone. This fourth edition cancels and replaces the third edition published in 2010 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) update of clause references in Table 2; b) addition of resistance to fluids test.
SIST EN IEC 60684-3-116:2024 is classified under the following ICS (International Classification for Standards) categories: 29.035.20 - Plastics and rubber insulating materials. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN IEC 60684-3-116:2024 has the following relationships with other standards: It is inter standard links to SIST EN 60684-3-116:2012. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase SIST EN IEC 60684-3-116:2024 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...