SIST EN 300 910 V7.4.1:2003
(Main)Digital cellular telecommunications system (Phase 2+) (GSM); Radio transmission and reception (GSM 05.05 version 7.4.1 Release 1998)
- Abstract
05.05; s31b; CR: A246; R98; 7.3.0; 7.4.0; Conforming requirements for LMUs containing a control mobile station
- Status
- Published
- Publication Date
- 30-Nov-2003
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Dec-2003
- Due Date
- 01-Dec-2003
- Completion Date
- 01-Dec-2003
SIST EN 300 910 V7.4.1:2003 is the Slovenian adoption of ETSI EN 300 910 Version 7.4.1. It specifies radio transmission and reception requirements for GSM Phase 2+ equipment in the GSM900, DCS1800 and PCS1900 bands, for Mobile Station (MS) and Base Station System (BSS) equipment, plus related repeaters and special conformance cases.
What does SIST EN 300 910 V7.4.1:2003 specify?
SIST EN 300 910 V7.4.1:2003 sets the RF characteristics that GSM equipment has to meet for compatibility between radio channels, compatibility with other systems in adjacent bands, and the transmission quality of the system. It applies to MS and BSS equipment, with annexes extending the requirements to repeaters, antenna feeder loss compensators, Location Measurement Units (LMU) and E-OTD MS requirements.
The main body is organized around frequency bands and channel arrangement, the radio reference configuration, transmitter characteristics, receiver characteristics, and combined transmitter/receiver performance. Unless stated otherwise, the requirements apply across the environmental conditions in Annex D.
| Annex | What it covers |
|---|---|
| A | Informative spectrum characteristics for modulation |
| B | Normative transmitted power level versus time |
| C | Normative propagation conditions and channel models |
| D | Normative environmental conditions |
| E | Normative repeater characteristics |
| F | Normative Antenna Feeder Loss Compensator characteristics |
| H | Normative requirements on LMU |
| I | Normative E-OTD Mobile Station requirements |
What are the key requirements of SIST EN 300 910 V7.4.1:2003?
Transmitter requirements
Clause 4 defines output power, output RF spectrum, spurious emissions, radiofrequency tolerance, dynamic output-level operation, phase accuracy and intermodulation attenuation. In practice, this is the part manufacturers use to set power classes, burst shaping and transmitter limits before type approval or conformance testing.
SIST EN 300 910 V7.4.1:2003 gives power-class limits for MS and BTS equipment in each band, and it also allows power-control steps so the network can adapt coverage and interference. For PCS1900 MS, the document also ties the radiated power to the applicable FCC EIRP limit.
The spectrum limits are split into modulation noise and switching transients. That matters because a transmitter can meet average power but still leak energy outside its channel during burst edges, which can disturb neighboring channels or other services.
Receiver and performance requirements
Clause 5 covers blocking, AM suppression, intermodulation and spurious emissions. These requirements tell test labs how well the receiver keeps working when strong unwanted signals, nearby carriers or receiver-generated emissions are present.
Clause 6 sets the combined transmitter/receiver performance. SIST EN 300 910 V7.4.1:2003 uses Named Error Rate and channel-specific measures such as frame erasure rate, bit error rate and residual bit error rate for speech, control and packet channels under static, TU, RA and HT propagation conditions from Annex C.
The document also covers frequency hopping, discontinuous transmission (DTX), discontinuous reception (DRX) and slow frequency hopping (SFH). In practice, this means the equipment has to meet the same core performance whether the network uses continuous operation or these power-saving and interference-mitigation modes.
Special equipment and special cases
Annex E sets repeater requirements, including spurious emissions, intermodulation products, out-of-band gain, frequency error and phase error. Annex F does the same for Antenna Feeder Loss Compensator (AFLC) devices, with separate checks for transmitting and receiving paths.
Annex H gives LMU requirements for Time-of-Arrival (TOA) and E-OTD measurement performance, including blocking, AM suppression, intermodulation and multipath behavior. Annex I adds E-OTD Mobile Station requirements for sensitivity and interference performance.
What terms does SIST EN 300 910 V7.4.1:2003 define?
- Mobile Station (MS) - the user equipment that transmits and receives in the GSM bands.
- Base Station System (BSS) - the network-side radio equipment covered by the transmitter and receiver requirements.
- Base Transceiver Station (BTS) - the transmitting and receiving radio part of the BSS that is tested for power, spectrum and receiver performance.
- Absolute Radio Frequency Channel Number (ARFCN) - the channel numbering used to identify the carrier frequency.
- Discontinuous Transmission (DTX) - a mode where the transmitter does not send continuously, so burst timing and residual power remain important.
- Slow Frequency Hopping (SFH) - a mode where the carrier changes in a controlled way, so performance is checked under hopping as well as non-hopping conditions.
- Location Measurement Unit (LMU) - equipment covered in Annex H for arrival-time and E-OTD measurements.
Who uses SIST EN 300 910 V7.4.1:2003?
Manufacturers of GSM MS, BTS, repeaters, AFLC devices and LMU equipment use this standard when designing RF hardware and defining test plans. Test laboratories use it for conformance and type testing, especially because it points to GSM11.10 and GSM11.20 for measurement methods.
Network operators and system integrators use it when they specify equipment, mix equipment classes, or plan multiband networks. Quality managers and buyers use it to check whether a product is intended for GSM900, DCS1800, PCS1900, or several of these bands at once.
Which standards are used with SIST EN 300 910 V7.4.1:2003?
- GSM01.04 - provides the abbreviations and acronyms used in the document.
- GSM02.06 - defines the types of MS, including multiband MS and power-class context.
- GSM05.01 - gives the radio subsystem reference configuration.
- GSM05.04 - defines the modulation used for phase accuracy and burst-related checks.
- GSM05.08 - provides link control, including adaptive power control timing and related behavior.
- GSM05.10 - defines radiofrequency tolerance and burst timing.
- GSM11.10 and GSM11.20 - specify the measurement methods used for the RF conformance tests.
- GSM04.14 - defines the loopback facility used for performance assessment.
- ETS 300 019-1-3 and ETS 300 019-1-4 - provide environmental condition classes for stationary telecom equipment.
- ANSIT1.610 (1990) - is referenced for PCS1900 wideband PCS EIRP limits.
What does the SIST EN 300 910 V7.4.1:2003 document contain?
The document contains power tables, spectrum masks, timing masks, propagation models and performance tables that are used for design verification and conformance testing. Annex B gives transmitted power versus time masks for normal and access bursts, while Annex C gives the channel models and Doppler spectra used in sensitivity and interference tests.
It also contains detailed receiver and transmitter test conditions, including measurement bandwidths, offsets from carrier, burst averaging rules and permitted exceptions. Annex D defines environmental conditions for MS and BSS equipment, and Annex E and Annex F add device-specific RF test requirements for repeaters and AFLC devices.
The performance clauses include tables for reference sensitivity and reference interference under static, TU, RA and HT conditions, plus packet-service and speech-channel cases. Annex H and Annex I extend the same testing style to LMU and E-OTD MS requirements, so the standard can be used for RF characterization, certification and factory acceptance testing.
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST EN 300 910 V7.4.1:2003 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Digital cellular telecommunications system (Phase 2+) (GSM); Radio transmission and reception (GSM 05.05 version 7.4.1 Release 1998)". This standard covers: 05.05; s31b; CR: A246; R98; 7.3.0; 7.4.0; Conforming requirements for LMUs containing a control mobile station
05.05; s31b; CR: A246; R98; 7.3.0; 7.4.0; Conforming requirements for LMUs containing a control mobile station
SIST EN 300 910 V7.4.1:2003 is classified under the following ICS (International Classification for Standards) categories: 33.070.50 - Global System for Mobile Communication (GSM). The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 300 910 V7.4.1:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Digital cellular telecommunications system (Phase 2+) (GSM); Radio transmission and reception (GSM 05.05 version 7.4.1 Release 1998)33.070.50Globalni sistem za mobilno telekomunikacijo (GSM)Global System for Mobile Communication (GSM)ICS:Ta slovenski standard je istoveten z:EN 300 910 Version 7.4.1SIST EN 300 910 V7.4.1:2003en01-december-2003SIST EN 300 910 V7.4.1:2003SLOVENSKI
STANDARD
ETSIEN300910V7.4.1(2000-10)EuropeanStandard(Telecommunicationsseries)Digitalcellulartelecommunicationssystem(Phase2+);Radiotransmissionandreception(GSM05.05version7.4.1Release1998)GLOBALSYSTEMFORMOBILECOMMUNICATIONSRSIST EN 300 910 V7.4.1:2003
ETSIETSIEN300910V7.4.1(2000-10)2(GSM05.05version7.4.1Release1998)ReferenceREN/SMG-020505Q7R2KeywordsDigitalcellulartelecommunicationssystem,GlobalSystemforMobilecommunications(GSM)ETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:+33492944200Fax:+33493654716SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://www.etsi.org/tb/status/Ifyoufinderrorsinthepresentdocument,sendyourcommentto:editor@etsi.frCopyrightNotificationNopartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2000.Allrightsreserved.SIST EN 300 910 V7.4.1:2003
ETSIETSIEN300910V7.4.1(2000-10)3(GSM05.05version7.4.1Release1998)ContentsIntellectualPropertyRights.6Foreword.61Scope.71.1References.71.2Abbreviations.82Frequencybandsandchannelarrangement.83Referenceconfiguration.94Transmittercharacteristics.104.1Outputpower.104.1.1MobileStation.104.1.2Basestation.124.1.2.1AdditionalrequirementsforPCS1900Basestations(PCS1900).134.2OutputRFspectrum.134.2.1Spectrumduetothemodulationandwidebandnoise.144.2.2Spectrumduetoswitchingtransients.174.3Spuriousemissions.184.3.1Principleofthespecification.184.3.2BaseTransceiverStation.194.3.3MobileStation.204.3.3.1MobileStationGSM900andDCS1800.204.3.3.2MobileStationPCS1900.204.4Radiofrequencytolerance.214.5Outputleveldynamicoperation.214.5.1BaseTransceiverStation.214.5.2MobileStation.214.6Phaseaccuracy.224.7Intermodulationattenuation.224.7.1Basetransceiverstation.224.7.2IntraBTSintermodulationattenuation.224.7.3IntermodulationbetweenMS(DCS1800&PCS1900only).234.7.4MobilePBX(GSM900only).235Receivercharacteristics.235.1Blockingcharacteristics.235.2AMsuppressioncharacteristics.255.3Intermodulationcharacteristics.265.4Spuriousemissions.266Transmitter/receiverperformance.266.1NominalErrorRates(NER).276.2Referencesensitivitylevel.276.3Referenceinterferencelevel.296.4Erroneousframeindicationperformance.306.5Randomaccessandpagingperformanceathighinputlevels.316.6Frequencyhoppingperformanceunderinterferenceconditions.31SIST EN 300 910 V7.4.1:2003
ETSIETSIEN300910V7.4.1(2000-10)4(GSM05.05version7.4.1Release1998)AnnexA(informative):Spectrumcharacteristics(spectrumduetothemodulation).43AnnexB(normative):Transmittedpowerlevelversustime.49AnnexC(normative):Propagationconditions.52C.1Simplewidebandpropagationmodel.52C.2Dopplerspectrumtypes.52C.3Propagationmodels.53C.3.1Typicalcaseforruralarea(RAx):(6tapsetting).53C.3.2Typicalcaseforhillyterrain(HTx):(12tapsetting).53C.3.3Typicalcaseforurbanarea(TUx):(12tapsetting).54C.3.4Profileforequalizationtest(EQx):(6tapsetting).54C.3.5Typicalcaseforverysmallcells(TIx):(2tapsetting).54AnnexD(normative):Environmentalconditions.55D.1General.55D.2EnvironmentalrequirementsfortheMSs.55D.2.1Temperature(GSM900andDCS1800).55D.2.1.1EnvironmentalConditions(PCS1900).55D.2.2Voltage.55D.2.3Vibration(GSM900andDCS1800).56D.2.3.1Vibration(PCS1900).56D.3EnvironmentalrequirementsfortheBSSequipment.56D.3.1EnvironmentalrequirementsfortheBSSequipment.57AnnexE(normative):Repeatercharacteristics(GSM900andDCS1800).58E.1Introduction.58E.2Spuriousemissions.58E.3Intermodulationproducts.59E.4Outofbandgain.59E.5Frequencyerrorandphaseerror.59AnnexF(normative):AntennaFeederLossCompensatorCharacteristics(GSM900andDCS1800).60F.1Introduction.60F.2Transmittingpath.60F.2.1Maximumoutputpower.60F.2.2Gain.60F.2.3Bursttransmissioncharacteristics.61F.2.4Phaseerror.61F.2.5Frequencyerror.62F.2.6Groupdelay.62F.2.7Spuriousemissions.62F.2.8VSWR.63F.2.9Stability.63F.3Receivingpath.63F.3.1Gain.63F.3.2Noisefigure.63F.3.3Groupdelay.63F.3.4Intermodulationperformance.63F.3.5VSWR.63F.3.6Stability.63SIST EN 300 910 V7.4.1:2003
ETSIETSIEN300910V7.4.1(2000-10)5(GSM05.05version7.4.1Release1998)F.4Guidelines(informative).64AnnexG:NotUsed.65AnnexH(normative):RequirementsonLocationMeasurementUnit.66H.1TOALMURequirements.66H.1.1Void.66H.1.2LMUcharacteristics.66H.1.2.1Blockingcharacteristics.66H.1.2.2AMsuppressioncharacteristics.66H.1.2.3Intermodulationcharacteristics.67H.1.2.4Spuriousemissions.67H.1.3Time-of-ArrivalMeasurementPerformance.67H.1.3.1SensitivityPerformance.67H.1.3.2InterferencePerformance.68H.1.3.3MultipathPerformance.69H.1.4RadioInterfaceTimingMeasurementPerformance.69H.2E-OTDLMURequirements.69H.2.1LMUCharacteristics.70H.2.1.1Blockingcharacteristics.70H.2.1.2AMsuppressioncharacteristics.70H.2.1.3Intermodulationcharacteristics.70H.2.2SensitivityandInterferencePerformance.70H.2.2.1SensitivityPerformance.70H.2.2.2InterferencePerformance.71H.2.2.3MultipathPerformance.72AnnexI(normative):E-OTDMobileStationRequirements.73I.1Introduction.73I.2SensitivityandInterferencePerformance.73I.2.1SensitivityPerformance.73I.2.2InterferencePerformance.74I.2.3MultipathPerformance.74AnnexL(informative):Changecontrolhistory.75History.76SIST EN 300 910 V7.4.1:2003
ETSIETSIEN300910V7.4.1(2000-10)6(GSM05.05version7.4.1Release1998)IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinETSISR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinETSISR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSITechnicalCommitteeSpecialMobileGroup(SMG).Thepresentdocumentdefinestherequirementsforthetransceiverofthedigitalmobilecellularandpersonalcommunicationsystemsoperatinginthe900MHz(P-GSM,E-GSMandR-GSM)and1800MHzband(GSM900andDCS1800).ThecontentsofthepresentdocumentmaybesubjecttocontinuingworkwithinSMGandmaychangefollowingformalSMGapproval.ShouldSMGmodifythecontentsofthepresentdocumentitwillthenbere-submittedforformalapprovalproceduresbyETSIwithanidentifyingchangeofreleasedateandanincreaseinversionnumberasfollows:Version7.x.ywhere:7GSMPhase2+Release1998.xtheseconddigitisincrementedforchangesofsubstance,i.e.technicalenhancements,corrections,updates,etc.;ythethirddigitisincrementedwheneditorialonlychangeshavebeenincorporatedinthespecification.NationaltranspositiondatesDateofadoptionofthisEN:29September2000DateoflatestannouncementofthisEN(doa):31December2000DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):30June2001DateofwithdrawalofanyconflictingNationalStandard(dow):30June2001SIST EN 300 910 V7.4.1:2003
ETSIETSIEN300910V7.4.1(2000-10)7(GSM05.05version7.4.1Release1998)1ScopeThepresentdocumentdefinestherequirementsforthetransceiverofthepan-EuropeandigitalmobilecellularandpersonalcommunicationsystemsoperatingintheGSM900MHzand1800MHzband(GSM900andDCS1800),andinthePCS1900MHzband.Requirementsaredefinedfortwocategoriesofparameters:-thosethatarerequiredtoprovidecompatibilitybetweentheradiochannels,connectedeithertoseparateorcommonantennas,thatareusedinthesystem.Thiscategoryalsoincludesparametersprovidingcompatibilitywithexistingsystemsinthesameoradjacentfrequencybands;-thosethatdefinethetransmissionqualityofthesystem.ThepresentdocumentdefinesRFcharacteristicsfortheMobileStation(MS)andBaseStationSystem(BSS).TheBSSwillcontaineitherBaseTransceiverStations(BTS)ormicrocellbasetransceiverstations(micro-BTS).TheprecisemeasurementmethodsarespecifiedinGSM11.10andGSM11.20.Unlessotherwisestated,therequirementsdefinedinthepresentdocumentapplytothefullrangeofenvironmentalconditionsspecifiedfortheequipment(seeannexD).Inthepresentdocumentsomerelaxation'sareintroducedforGSM900MSswhichfulfilthefollowingconditions:-pertaintopowerclass4or5(seesubclause4.1.1);-notdesignedtobevehiclemounted(seeGSM02.06).InthepresentdocumenttheseMobileStationsarereferredtoas"smallMS".NOTE:Inthepresentdocument,ahandheldwhichcanbeconnectedtoacarkitisnotconsideredtobevehiclemounted.MSsmayoperateonmorethanoneofthefrequencybandsspecifiedinclause2.TheseMSs,definedinGSM02.06,arereferredtoas"MultibandMSs"inthepresentdocument.MultibandMSsshallmeetallrequirementsforeachofthebandssupported.TherelaxationonGSM900fora"smallMS"arealsovalidforamultibandMSifitcomplieswiththedefinitionofasmallMS.TheRFcharacteristicsofrepeatersaredefinedinannexEofthepresentdocument.AnnexesDandEaretheonlyclausesofthepresentdocumentapplicabletorepeaters.AnnexEdoesnotapplytotheMSorBSS.1.1ReferencesThefollowingdocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsofthepresentdocument.• Referencesareeitherspecific(identifiedbydateofpublication,editionnumber,versionnumber,etc.)ornon-specific.• Foraspecificreference,subsequentrevisionsdonotapply.• Foranon-specificreference,thelatestversionapplies.• Anon-specificreferencetoanETSshallalsobetakentorefertolaterversionspublishedasanENwiththesamenumber.• ForthisRelease1998document,referencestoGSMdocumentsareforRelease1998versions(version7.x.y).[1]GSM01.04:"Digitalcellulartelecommunicationssystem(Phase2+);Abbreviationsandacronyms".[2]GSM02.06:"Digitalcellulartelecommunicationssystem(Phase2+);TypesofMobileStations(MS)".SIST EN 300 910 V7.4.1:2003
ETSIETSIEN300910V7.4.1(2000-10)8(GSM05.05version7.4.1Release1998)[3]GSM03.64:"Digitalcellulartelecommunicationssystem(Phase2+);GeneralPacketRadioService(GPRS);GPRSRadioInterfaceStage2".[4]GSM05.01:"Digitalcellulartelecommunicationssystem(Phase2+);PhysicallayerontheradiopathGeneraldescription".[5]GSM05.04:"Digitalcellulartelecommunicationssystem(Phase2+);Modulation".[6]GSM05.08:"Digitalcellulartelecommunicationssystem(Phase2+);Radiosubsystemlinkcontrol".[7]GSM05.10:"Digitalcellulartelecommunicationssystem(Phase2+);Radiosubsystemsynchronization".[8]GSM11.10:"Digitalcellulartelecommunicationssystem(Phase2+);MobileStation(MS)conformityspecification".[9]GSM11.11:"Digitalcellulartelecommunicationssystem(Phase2+);SpecificationoftheSubscriberIdentityModule-MobileEquipment(SIM-ME)interface".[10]ITU-TRecommendationO.153:"Basicparametersforthemeasurementoferrorperformanceatbitratesbelowtheprimaryrate".[11]ETS300019-1-3:"EquipmentEngineering(EE);Environmentalconditionsandenvironmentaltestsfortelecommunicationsequipment;Part1-3:ClassificationofenvironmentalconditionsStationaryuseatweatherprotectedlocations".[12]ETS300019-1-4:"EquipmentEngineering(EE);Environmentalconditionsandenvironmentaltestsfortelecommunicationsequipment;Part1-4:ClassificationofenvironmentalconditionsStationaryuseatnon-weatherprotectedlocations".[13]GSM04.14:"Digitalcellulartelecommunicationssystem(Phase2+);Individualequipmenttyperequirementsandinterworking;Specialconformancetestingfunctions".[14]ANSIT1.610(1990):"GenericProceduresforSupplementaryServices".[15]GSM03.52:"Digitalcellulartelecommunicationssystem(Phase2+);GSMCordlessTelephonySystem(CTS);LowerlayersoftheCTSradiointerface;Stage2".1.2AbbreviationsAbbreviationsusedinthepresentdocumentarelistedinGSM01.04.2Frequencybandsandchannelarrangementi)StandardorprimaryGSM900Band,P-GSM:-forStandardGSM900band,thesystemisrequiredtooperateinthefollowingfrequencyband:-890MHzto915MHz:mobiletransmit,basereceive;-935MHzto960MHz:basetransmit,mobilereceive.ii)ExtendedGSM900Band,E-GSM(includesStandardGSM900band):-forExtendedGSM900band,thesystemisrequiredtooperateinthefollowingfrequencyband:-880MHzto915MHz:mobiletransmit,basereceive;-925MHzto960MHz:basetransmit,mobilereceive.SIST EN 300 910 V7.4.1:2003
ETSIETSIEN300910V7.4.1(2000-10)9(GSM05.05version7.4.1Release1998)iii)RailwaysGSM900Band,R-GSM(includesStandardandExtendedGSM900Band);-forRailwaysGSM900band,thesystemisrequiredtooperateinthefollowingfrequencyband:-876MHzto915MHz:mobiletransmit,basereceive;-921MHzto960MHz:basetransmit,mobilereceive.iv)DCS1800Band:-forDCS1800,thesystemisrequiredtooperateinthefollowingband:-1710MHzto1785MHz:mobiletransmit,basereceive;-1805MHzto1880MHz:basetransmit,mobilereceive.v)PCS1900Band:-forPCS1900,thesystemisrequiredtooperateinthefollowingband:-1850MHzto1910MHz:mobiletransmit,basereceive;-1930MHzto1990MHzbasetransmit,mobilereceive.NOTE1:ThetermGSM900isusedforanyGSMsystemwhichoperatesinany900MHzband.NOTE2:TheBTSmaycoverthecompleteband,ortheBTScapabilitiesmayberestrictedtoasubsetonly,dependingontheoperatorneeds.OperatorsmayimplementnetworkswhichoperatesonacombinationofthefrequencybandsabovetosupportmultibandmobileterminalswhicharedefinedinGSM02.06.Thecarrierspacingis200kHz.Thecarrierfrequencyisdesignatedbytheabsoluteradiofrequencychannelnumber(ARFCN).IfwecallFl(n)thefrequencyvalueofthecarrierARFCNninthelowerband,andFu(n)thecorrespondingfrequencyvalueintheupperband,wehave:P-GSM900Fl(n)=890+0.2*n1≤n≤124Fu(n)=Fl(n)+45E-GSM900Fl(n)=890+0.2*n0≤n≤124Fu(n)=Fl(n)+45Fl(n)=890+0.2*(n-1024)975≤n≤1023R-GSM900Fl(n)=890+0.2*n0≤n≤124Fu(n)=Fl(n)+45Fl(n)=890+0.2*(n-1024)955≤n≤1023DCS1800Fl(n)=1710.2+0.2*(n-512)512≤n≤885Fu(n)=Fl(n)+95PCS1900FI(n)=1850.2+.2*(n-512)512≤n≤810Fu(n)=FI(n)+80FrequenciesareinMHz.3ReferenceconfigurationThereferenceconfigurationfortheradiosubsystemisdescribedinGSM05.01.Themicro-BTSisdifferentfromanormalBTSintwoways.Firstly,therangerequirementsaremuchreducedwhilstthecloseproximityrequirementsaremorestringent.Secondly,themicro-BTSisrequiredtobesmallandcheaptoallowexternalstreetdeploymentinlargenumbers.Becauseofthesedifferencesthemicro-BTSneedsadifferentsetofRFparameterstobespecified.WheretheRFparametersarenotdifferentforthemicro-BTSthenormalBTSparametersshallapply.Thepico-BTSisanextensionofthemicro-BTSconcepttotheindoorenvironments.Theverylowdelayspread,lowspeed,andsmallcellsizesgiverisetoaneedforadifferentsetofRFparameterstobespecified.SIST EN 300 910 V7.4.1:2003
ETSIETSIEN300910V7.4.1(2000-10)10(GSM05.05version7.4.1Release1998)4TransmittercharacteristicsThroughoutthisclause,unlessotherwisestated,requirementsaregivenintermsofpowerlevelsattheantennaconnectoroftheequipment.Forequipmentwithintegralantennaonly,areferenceantennawith0dBigainshallbeassumed.Thetermoutputpowerreferstothemeasureofthepowerwhenaveragedovertheusefulpartoftheburst(seeannexB).Thetermpeakholdreferstoameasurementwherethemaximumistakenoverasufficienttimethatthelevelwouldnotsignificantlyincreaseiftheholdingtimewerelonger.4.1Outputpower4.1.1MobileStationTheMSmaximumoutputpowerandlowestpowercontrollevelshallbe,accordingtoitsclass,asdefinedinthefollowingtable(seealsoGSM02.06).PowerGSM900DCS1800PCS1900Tolerance(dB)classNominalMaximumoutputNominalMaximumoutputNominalMaximumoutputforconditionspowerpowerpowernormalextreme1------1W(30dBm)1W(30dBm)±2±2.528W(39dBm)0.25W(24dBm)0.25W(24dBm)±2±2.535W(37dBm)4W(36dBm)2W(33dBm)±2±2.542W(33dBm)±2±2.550.8W(29dBm)±2±2.5NOTE:ThelowestnominaloutputpowerforallclassesofGSM900MSis5dBmandforallclassesofDCS1800andPCS1900MSis0dBm.AmultibandMShasacombinationofthepowerclassineachbandofoperationfromthetableabove.Anycombinationmaybeused.ThePCS1900MS,includingitsactualantennagain,shallnotexceedamaximumof2Watts(+33dBm)EIRPpertheapplicableFCCrulesforwidebandPCSservices[ANSIT1.610(1990):"GenericProceduresforSupplementaryServices"].PowerClass3isrestrictedtotransportableorvehicularmountedunits.Thedifferentpowercontrollevelsneededforadaptivepowercontrol(seeGSM05.08)shallhavethenominaloutputpowerasdefinedinthetablebelow,startingfromthepowercontrollevelforthelowestnominaloutputpoweruptothepowercontrollevelforthemaximumnominaloutputpowercorrespondingtotheclassoftheparticularMSasdefinedinthetableabove.WheneverapowercontrollevelcommandstheMStouseanominaloutputpowerequaltoorgreaterthanthemaximumnominaloutputpowerforthepowerclassoftheMS,thenominaloutputpowertransmittedshallbethemaximumnominaloutputpowerfortheMSclass,andthetoleranceof±2or2,5dB(seetableabove)shallapply.SIST EN 300 910 V7.4.1:2003
ETSIETSIEN300910V7.4.1(2000-10)11(GSM05.05version7.4.1Release1998)GSM900PowercontrollevelNominalOutputpower(dBm)Tolerance(dB)forconditionsnormalextreme0-239±2±2,5337±3±4435±3±4533±3±4631±3±4729±3±4827±3±4925±3±41023±3±41121±3±41219±3±41317±3±41415±3±41513±3±41611±5±6179±5±6187±5±619-315±5±6DCS1800PowercontrollevelNominalOutputpower(dBm)Tolerance(dB)forconditionsnormalextreme2936±2±2,53034±3±43132±3±4030±3±4128±3±4226±3±4324±3±4422±3±4520±3±4618±3±4716±3±4814±3±4912±4±51010±4±5118±4±5126±4±5134±4±5142±5±615-280±5±6NOTE1:ForDCS1800,thepowercontrollevels29,30and31arenotusedwhentransmittingtheparameterMS_TXPWR_MAX_CCHonBCCH,forcrossphasecompatibilityreasons.Iflevelsgreaterthan30dBmarerequiredfromtheMSduringarandomaccessattempt,thentheseshallbedecodedfromparametersbroadcastontheBCCHasdescribedinGSM05.08.Furthermore,thedifferenceinoutputpoweractuallytransmittedbytheMSbetweentwopowercontrollevelswherethedifferenceinnominaloutputpowerindicatesanincreaseof2dB(takingintoaccounttherestrictionsduetopowerclass),shallbe+2±1,5dB.Similarly,ifthedifferenceinoutputpoweractuallytransmittedbytheMSbetweentwopowercontrollevelswherethedifferenceinnominaloutputpowerindicatesandecreaseof2dB(takingintoaccounttherestrictionsduetopowerclass),shallbe-2±1,5dB.NOTE2:A2dBnominaldifferenceinoutputpowercanexistfornon-adjacentpowercontrollevelse.g.powercontrollevels18and22forGSM900;powercontrollevels31and0forclass3DCS1800andpowercontrollevels3and6forclass4GSM900.SIST EN 300 910 V7.4.1:2003
ETSIETSIEN300910V7.4.1(2000-10)12(GSM05.05version7.4.1Release1998)Achangefromanypowercontrolleveltoanypowercontrollevelmayberequiredbythebasetransmitter.ThemaximumtimetoexecutethischangeisspecifiedinGSM05.08.PCS1900PowerControlLevelOutputPower(dBm)Tolerance(dB)forconditionsNormalExtreme22-29ReservedReserved Reserved 3033±2dB±2,5dB3132±2dB±2,5dB030±3dB1±4dB1128±3dB±4dB226±3dB±4dB324±3dB1±4dB1422±3dB±4dB520±3dB±4dB618±3dB±4dB716±3dB±4dB814±3dB±4dB912±4dB±5dB1010±4dB±5dB118±4dB±5dB126±4dB±5dB134±4dB±5dB142±5dB±6dB150±5dB±6dB16-21ReservedReservedReservedNOTE:ToleranceforMSPowerClasses1and2is±2dBnormaland±2,5dBextremeatPowerControlLevels0and3respectively.TheoutputpoweractuallytransmittedbytheMSateachofthepowercontrollevelsshallformamonotonicsequence,andtheintervalbetweenpowerstepsshallbe2dB± 1,5dBexceptforthestepbetweenpowercontrollevels30and31wheretheintervalis1dB± 1dB.TheMStransmittermaybecommandedbytheBTStochangefromanypowercontrolleveltoanyotherpowercontrollevel.ThemaximumtimetoexecutethischangeisspecifiedinGSM05.08.ForCTStransmission,thenominalmaximumoutputpoweroftheMSshallberestrictedto:-11dBm(0,015W)inGSM900i.e.powercontrollevel16;-12dBm(0,016W)inDCS1800i.e.powercontrollevel9.4.1.2BasestationTheBaseStationTransmittermaximumoutputpower,measuredattheinputoftheBSSTxcombiner,shallbe,accordingtoitsclass,asdefinedinthefollowingtables:GSM900DCS1800&PCS1900TRXMaximumTRXMaximumpowerclassoutputpowerpowerclassoutputpower1320-(<640)W120-(<40)W2160-(<320)W210-(<20)W380-(<160)W35-(<10)W440-(<80)W42.5-(<5)W520-(<40)W610-(<20)W75-(<10)W82.5-(<5)WSIST EN 300 910 V7.4.1:2003
ETSIETSIEN300910V7.4.1(2000-10)13(GSM05.05version7.4.1Release1998)Themicro-BTSmaximumoutputpowerpercarriermeasuredattheantennaconnectorafterallstagesofcombiningshallbe,accordingtoitsclass,definedinthefollowingtable.GSM900microandpico-BTSDCS1800&PCS1900microandpico-BTSTRXpowerclassMaximumoutputpowerTRXpowerclassMaximumoutputpowerMicroMicroM1(>19)-24dBmM1(>27)-32dBmM2(>14)-19dBmM2(>22)-27dBmM3(>9)-14dBmM3(>17)-22dBmPicoPicoP1(>13)-20dBmP1(>16)-23dBmThetoleranceoftheactualmaximumoutputpoweroftheBTSshallbe±2dBundernormalconditionsand±2,5dBunderextremeconditions.Settingsshallbeprovidedtoallowtheoutputpowertobereducedfromitsmaximumlevelinatleastsixstepsofnominally2dBwithanaccuracyof±1dBtoallowafineadjustmentofthecoveragebythenetworkoperator.Inaddition,theactualabsoluteoutputpowerateachstaticRFpowerstep(N)shallbe2*NdBbelowtheabsoluteoutputpoweratstaticRFpowerstep0withatoleranceof±3dBundernormalconditionsand±4dBunderextremeconditions.ThestaticRFpowerstep0shallbetheactualoutputpoweraccordingtotheTRXpowerclass.AsanoptiontheBSScanutilizedownlinkRFpowercontrol.InadditiontothestaticRFpowerstepsdescribedabove,theBSSmaythenutilizeupto15stepsofpowercontrollevelswithastepsizeof2dB±1,5dB,inadditiontheactualabsoluteoutputpowerateachpowercontrollevel(N)shallbe2*NdBbelowtheabsoluteoutputpoweratpowercontrollevel0withatoleranceof±3dBundernormalconditionsand±4dBunderextremeconditions.Thepowercontrollevel0shallbethesetoutputpoweraccordingtotheTRXpowerclassandthesixpowersettingsdefinedabove.NetworkoperatorsormanufacturersmayalsospecifytheBTSoutputpowerincludinganyTxcombiner,accordingtotheirneeds.4.1.2.1AdditionalrequirementsforPCS1900Basestations(PCS1900)TheBTStransmittermaximumratedoutputpowerpercarrier,measuredattheinputofthetransmittercombiner,shallbe,accordingtoitsTRXpowerclass,asdefinedinthetableabove.Thebasestationoutputpowermayalsobespecifiedbythemanufacturerorsystemoperatoratadifferentreferencepoint(e.g.aftertransmittercombining).ThemaximumradiatedpowerfromtheBTS,includingitsantennasystem,shallnotexceedamaximumof1640WEIRP,equivalentto1000WERP,pertheapplicableFCCrulesforwidebandPCSservices[14].4.2OutputRFspectrumThespecificationscontainedinthissubclauseapplytobothBTSandMS,infrequencyhoppingaswellasinnonfrequencyhoppingmode,exceptthatbeyond1800kHzoffsetfromthecarriertheBTSisnottestedinfrequencyhoppingmode.Duetotheburstynatureofthesignal,theoutputRFspectrumresultsfromtwoeffects:-themodulationprocess;-thepowerrampingupanddown(switchingtransients).Thetwoeffectsarespecifiedseparately;themeasurementmethodusedtoanalyseseparatelythosetwoeffectsisspecifiedinGSM11.10and11.20.Itisbasedonthe"ringingeffect"duringthetransients,andisameasurementinthetimedomain,ateachpointinfrequency.Thelimitsspecifiedthereunderarebasedona5-polesynchronouslytunedmeasurementfilter.Unlessotherwisestated,fortheBTS,onlyonetransmitterisactiveforthetestsofthissubclause.SIST EN 300 910 V7.4.1:2003
ETSIETSIEN300910V7.4.1(2000-10)14(GSM05.05version7.4.1Release1998)4.2.1SpectrumduetothemodulationandwidebandnoiseTheoutputRFmodulationspectrumisspecifiedinthefollowingtables.AmaskrepresentationofthisspecificationisshowninannexA.ThisspecificationappliesforallRFchannelssupportedbytheequipment.Thespecificationappliestotheentireoftherelevanttransmitbandandupto2MHzeitherside.Thespecificationshallbemetunderthefollowingmeasurementconditions:-forBTSupto1800kHzfromthecarrierandforMSinallcases:-zerofrequencyscan,filterbandwidthandvideobandwidthof30kHzupto1800kHzfromthecarrierand100kHzat1800kHzandabovefromthecarrier,withaveragingdoneover50%to90%oftheusefulpartofthetransmittedbursts,excludingthemidamble,andthenaveragedoveratleast200suchburstmeasurements.Above1800kHzfromthecarrieronlymeasurementscentredon200kHzmultiplesaretakenwithaveragingover50bursts.-forBTSat1800kHzandabovefromthecarrier:-sweptmeasurementwithfilterandvideobandwidthof100kHz,minimumsweeptimeof75ms,averagingover200sweeps.Allslotsactive,frequencyhoppingdisabled.-whentestsaredoneinfrequencyhoppingmode,theaveragingshallincludeonlyburststransmittedwhenthehoppingcarriercorrespondstothenominalcarrierofthemeasurement.Thespecificationsthenapplytothemeasurementresultsforanyofthehoppingfrequencies.Thefiguresintablesa)andb)below,attheverticallylistedpowerlevel(dBm)andatthehorizontallylistedfrequencyoffsetfromthecarrier(kHz),arethenthemaximumallowedlevel(dB)relativetoameasurementin30kHzonthecarrier.NOTE:Thisapproachofspecificationhasbeenchosenforconvenienceandspeedoftesting.Itdoeshoweverrequirecarefulinterpretationifthereisaneedtoconvertfiguresinthefollowingtablesintospectraldensityvalues,inthatonlypartofthepowerofthecarrierisusedastherelativereference,andinadditiondifferentmeasurementbandwidthsareappliedatdifferentoffsetsfromthecarrier.AppropriateconversionfactorsforthispurposearegiveninGSM05.50.FortheBTS,thepowerlevelisthe"actualabsoluteoutputpower"definedinsubclause4.1.2.Ifthepowerlevelfallsbetweentwoofthevaluesinthetable,therequirementshallbedeterminedbylinearinterpolation.SIST EN 300 910 V7.4.1:2003
ETSIETSIEN300910V7.4.1(2000-10)15(GSM05.05version7.4.1Release1998)a1)GSM900MS:100200250400≥600≥1800≥3000≥6000<1800<3000<6000≥39+0,5-30-33-60-66-69-71-7737+0,5-30-33-60-64-67-69-7535+0,5-30-33-60-62-65-67-73≤33+0,5-30-33-60-60-63-65-71a2)GSM900normalBTS:100200250400≥600≥1200≥1800≥6000<1200<1800<6000≥43+0,5-30-33-60-70-73-75-8041+0,5-30-33-60-68-71-73-8039+0,5-30-33-60-66-69-71-8037+0,5-30-33-60-64-67-69-8035+0,5-30-33-60-62-65-67-80≤33+0,5-30-33-60-60-63-65-80a3)GSM900micro-BTS:100200250400≥600≥1200≥1800<1200<1800≤33+0,5-30-33-60-60-63-70a4)GSM900pico-BTS:100200250400≥600≥1200≥1800≥6000<1200<1800<6000≤20+0,5-30-33-60-60-63-70-80b1)DCS1800MS:100200250400≥600≥1800≥6000<1800<6000≥36+0,5-30-33-60-60-71-7934+0,5-30-33-60-60-69-7732+0,5-30-33-60-60-67-7530+0,5-30-33-60-60-65-7328+0,5-30-33-60-60-63-7126+0,5-30-33-60-60-61-69≤24+0,5[tdb]-33-60-60-59-67b2)DCS1800normalBTS:100200250400≥600≥1200≥1800≥6000<1200<1800<6000≥43+0,5-30-33-60-70-73-75-8041+0,5-30-33-60-68-71-73-8039+0,5-30-33-60-66-69-71-8037+0,5-30-33-60-64-67-69-8035+0,5-30-33-60-62-65-67-80≤33+0,5-30-33-60-60-63-65-80SIST EN 300 910 V7.4.1:2003
ETSIETSIEN300910V7.4.1(2000-10)16(GSM05.05version7.4.1Release1998)b3)DCS1800micro-BTS:100200250400≥600≥1200≥1800<1200<180035+0,5-30-33-60-62-65-76≤33+0,5-30-33-60-60-63-76b4)DCS1800pico-BTS:100200250400≥600≥1200≥1800≥6000<1200<1800<6000≤23+0,5-30-33-60-60-63-76-80c1)PCS1900MS:100200250400≥600≥1200≥1800≥6000<1200<1800<6000≥33+0,5-30-33-60-60-60-68-7632+0,5-30-33-60-60-60-67-7530+0,5-30-33-60-60-60-65-7328+0,5-30-33-60-60-60-63-7126+0,5-30-33-60-60-60-61-69≤24+0,5-30-33-60-60-60-59-67c2)PCS1900normalBTS:100200250400≥600≥1200≥1800≥6000<1200<1800<6000≥43+0,5-30-33-60-70-73-75-8041+0,5-30-33-60-68-71-73-8039+0,5-30-33-60-66-69-71-8037+0,5-30-33-60-64-67-69-8035+0,5-30-33-60-62-65-67-80≤33+0,5-30-33-60-60-63-65-80c3)PCS1900micro-BTS.ThePCS1900micro-BTSspectrumduetomodulationandnoiseatallfrequencyoffsetsgreaterthan1.8MHzfromcarriershallbe-76dBforallmicro-BTSclasses.Theseareaveragelevelsinameasurementbandwidthof100kHzrelativetoameasurementin30kHzoncarrier.Themeasurementwillbemadeinnon-frequencyhoppingmodeundertheconditionsspecifiedforthenormalBTS.Thefollowingexceptionsshallapply,usingthesamemeasurementconditionsasspecifiedabove:i)inthecombinedrange600kHzto6MHzaboveandbelowthecarrier,inuptothreebandsof200kHzwidthcentredonafrequencywhichisanintegermultipleof200kHz,exceptionsatupto-36dBmareallowed;ii)above6MHzoffsetfromthecarrierinupto12bandsof200kHzwidthcentredonafrequencywhichisanintegermultipleof200kHz,exceptionsatupto-36dBmareallowed.FortheBTSonlyonetransmitterisactiveforthistest.Usingthesamemeasurementconditionsasspecifiedabove,ifarequirementintablesa)andb)istighterthanthelimitgiveninthefollowing,thelattershallbeappliedinstead.iii)ForMS:FrequencyoffsetfromthecarrierGSM900DCS1800&PCS1900<600kHz-36dBm-36dBm≥600kHz,<1800kHz-51dBm-56dBm≥1800kHz-46dBm-51dBmSIST EN 300 910 V7.4.1:2003
ETSIETSIEN300910V7.4.1(2000-10)17(GSM05.05version7.4.1Release1998)iv)FornormalBTS,wherebythelevelsgivenhereindBarerelativetotheoutputpoweroftheBTSattheloweststaticpowerlevelmeasuredin30kHz:FrequencyoffsetfromthecarrierGSM900DCS1800&PCS1900<1800kHzmax{-88dB,-65dBm}max{-88dB,-57dBm}≥1800kHzmax{-83dB,-65dBm}max{-83dB,-57dBm}v)Formicroandpico-BTS,at1800kHzandabovefromthecarrier:PowerClassGSM900DCS1800&PCS1900M1-59dBm-57dBmM2-64dBm-62dBmM3P1-69dBm-68dBm-67dBm-65dBm4.2.2SpectrumduetoswitchingtransientsThoseeffectsarealsomeasuredinthetimedomainandthespecificationsassumethefollowingmeasurementconditions:zerofrequencyscan,filterbandwidth30kHz,peakhold,andvideobandwidth100kHz.Theexampleofawaveformduetoaburstasseenina30kHzfilteroffsetfromthecarrierisgiventhereunder(figure1).dBt100%90%Averagingperiod50%midambleUsefulpartoftheburst0%SwitchingtransientsMax-holdlevel=peakofswitchingtransientsVideoaveragelevel=spectrumduetomodulationFigure1:Exampleofatimewaveformduetoaburstasseenina30kHzfilteroffsetfromthecarrierSIST EN 300 910 V7.4.1:2003
ETSIETSIEN300910V7.4.1(2000-10)18(GSM05.05version7.4.1Release1998)a)MobileStation:PowerlevelMaximumlevelmeasured400kHz600kHz1200kHz1800kHz39dBm-21dBm-26dBm-32dBm-36dBm≤37dBm-23dBm-26dBm-32dBm-36dBmNOTE1:Therelaxation'sforpowerlevel39dBmisinlinewiththemodulatedspectraandthuscausesnegligibleadditionalinterferencetoananaloguesystembyaGSMsignal.NOTE2:Thenear-fardynamicswiththisspecificationhasbeenestimatedtobeapproximately58dBforMSoperatingatapowerlevelof8Wor49dBforMSoperatingatapowerlevelof1W.Thenear-fardynamicsthengraduallydecreasesby2dBperpowerleveldownto32dBforMSoperatingincellswithamaximumallowedoutputpowerof20mWor29dBforMSoperatingat10mW.NOTE3:Thepossibleperformancedegradationduetoswitchingtransientleakingintothebeginningortheendofaburst,wasestimatedandfoundtobeacceptablewithrespecttotheBERduetocochannelinterference(C/I).b)Basetransceiverstation:Themaximumlevelmeasured,afteranyfiltersandcombiners,attheindicatedoffsetfromthecarrier,is:Maximumlevelmeasured400kHz600kHz1200kHz1800kHzGSM900-57dBc-67dBc-74dBc-74dBcDCS1800&PCS1900-50dBc-58dBc-66dBc-66dBcor-36dBm,whicheveristhehigher.dBcmeansrelativetotheoutputpowerattheBTS,measuredatthesamepointandinafilterbandwidthofatleast300kHz.NOTE4:Someoftheaboverequirementsaredifferentfromthosespecifiedinsubclause4.3.2.4.3SpuriousemissionsThelimitsspecifiedthereunderarebasedona5-polesynchronouslytunedmeasurementfilter.Inadditiontotherequirementsofthissubclause,thePCS1900BTSandPCS1900MSshallalsocomplywiththeapplicablelimitsforspuriousemissionsestablishedbytheFCCrulesforwideb
...