iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 14973:2007/AC:2007

(Corrigendum)

Conveyor belts for use in underground installations - Electrical and flammability safety requirements

Conveyor belts for use in underground installations - Electrical and flammability safety requirements

AFNOR - Translation error

Fördergurte für die Verwendung untertage - Elektrische und brandtechnische Sicherheitsanforderungen

Courroies transporteuses pour usage dans les installations souterraines - Exigences de sécurité électrique et protection contre l'inflammabilité

Naprave za kontinuirni transport – Trakovi tračnih transporterjev za podzemno vgradnjo – Električne in požarnovarnostne zahteve

General Information

Status
Withdrawn
Publication Date
20-Jun-2007
Withdrawal Date
18-Aug-2010
ICS
13.220.40 - Ignitability and burning behaviour of materials and products
53.040.20 - Components for conveyors
Technical Committee
DTN - Lift and transport appliances
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
17-Aug-2010
Due Date
09-Sep-2010
Completion Date
19-Aug-2010
Directive
94/9/EC - Directive 94/9/EC of the European Parliament and the Council of 23 March 1994 on the approximation of the laws of the Member States concerning equipment and protective systems intended for use in potentially explosive atmospheres
98/37/EC - Machinery
Mandate
M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
M/BC/CEN/92/8 - Mandate to CEN/CENELEC for the preparation of a work programme relating to equipment and protective systems for use in potentially explosive atmospheres
Ref Project
EN 14973:2006/AC:2007 - Conveyor belts for use in underground installations - Electrical and flammability safety requirements

Relations

Corrects
SIST EN 14973:2007 - Conveyor belts for use in underground installations - Electrical and flammability safety requirements
Effective Date
01-Jul-2007
Consolidated By
SIST EN 14973:2007+A1:2008 - Conveyor belts for use in underground installations - Electrical and flammability safety requirements
Effective Date
18-Jan-2023
Consolidated By
SIST EN 14973:2007+A1:2008 - Conveyor belts for use in underground installations - Electrical and flammability safety requirements
Effective Date
19-Jan-2023
Replaced By
SIST EN 14973:2007+A1:2008 - Conveyor belts for use in underground installations - Electrical and flammability safety requirements
Effective Date
01-Sep-2010

Buy Standard

EN 14973:2007/AC:2007EN 14973:2007/AC:2007
PreviousNext
Corrigendum
EN 14973:2007/AC:2007
French language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Conveyor belts for use in underground installations - Electrical and flammability safety requirementsCourroies transporteuses pour usage dans les installations souterraines - Exigences de sécurité électrique et protection contre l'inflammabilitéFördergurte für die Verwendung untertage - Elektrische und brandtechnische SicherheitsanforderungenTa slovenski standard je istoveten z:EN 14973:2006/AC:2007SIST EN 14973:2007/AC:2007fr53.040.20Deli za transporterjeComponents for conveyors13.220.40Sposobnost vžiga in obnašanje materialov in proizvodov pri gorenjuIgnitability and burning behaviour of materials and productsICS:SLOVENSKI
STANDARDSIST EN 14973:2007/AC:200701-julij-2007







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14973:2006/ACJanuary 2007Janvier 2007Januar 2007ICS 53.040.20English versionVersion FrançaiseDeutsche FassungConveyor belts for use in underground installations - Electrical andflammability safety requirementsCourroies transporteuses pour usage dansles installations souterraines - Exigencesde sécurité électrique et protection contrel'inflammabilitéFördergurte für die Verwendung untertage -Elektrische und brandtechnischeSicherheitsanforderungenThis corrigendum becomes effective on 24 January 2007 for incorporation in the official Frenchversion of the EN.Ce corrigendum pr
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 340:2022(Main)
Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method (ISO 340:2022)
EN ISO 340:2022

This document specifies a method for assessing, on a small scale, the reaction of a conveyor belt to an
ignition flame source. It is applicable to conveyor belts having a textile carcass as well as steel cord
conveyor belts.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14973:2016(Main)
Conveyor belts for use in underground installations - Electrical and flammability safety requirements
EN 14973:2015

This European Standard specifies electrical and flammability safety requirements for conveyor belts
intended for use in underground installations, in the presence of flammable or non-flammable
atmospheres.
Conveyor belts covered by this European Standard and intended for use in flammable atmospheres are
intended for use on conveyor belt installations (machinery in mines). The belt is a component or part of
equipment, which can be incorporated into the conveyor, which is an equipment of Group I, Category
M2, as defined in 3.2.2 of EN 13463-1:2009.
This European Standard is not applicable to light conveyor belts as described in EN ISO 21183-1:2006
nor is it applicable to conveyor belts which are manufactured before the date of publication of this
document by CEN.
This European Standard deals with those significant hazards detailed in A.1.
Attention is drawn to Annexes ZA and ZB.
NOTE A summary of the requirements of this European Standard is given in Table 2. This is intended for
quick reference only.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12882:2015(Main)
Conveyor belts for general purpose use - Electrical and flammability safety requirements
EN 12882:2015

This European Standard specifies electrical and flammability safety requirements for general purposeconveyor belts not intended for use in underground installations and a means of categorizing conveyor belts interms of the level of safety sought in their end use application. This European Standard does not provide
electrical safety requirements for volume resistance which may be measured by the methods in
EN ISO 21178 and which is relevant to some types of light conveyor belts.
This European Standard is not applicable to conveyor belts which are manufactured before the date of
publication of this document by CEN.
NOTE 1 Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive
atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present
standard is not intended to provide means of complying with the essential health and safety requirements of
Directive 94/9/EC, this being covered in EN 14973.
NOTE 2 EN 12882 is not a product standard but is intended to help users of conveyor belts to select the required
electrical and flammability safety properties needed following a suitable risk assessment. No requirements are, therefore,
included for marking, information to be supplied, etc., these matters being covered in relevant product standards such
as EN ISO 14890 and EN ISO 15236-1.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12881-1:2014(Main)
Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests
EN 12881-1:2014

EN 12881-1 describes four methods for measuring the propagation of a flame along a conveyor belt which has been exposed to a relatively high localized heat source such as a fire. The damage suffered by the conveyor belt, as well as its tendency to support combustion, is measured by observing the extent to which the fire spreads along the test piece. Method A uses a test piece 2 m in length and consumes propane gas through the burner at the rate of (1,30 ± 0,05) kg per 10 min. Method B uses a test piece 2,5 m in length and consumes propane gas through two burners mounted above and below the test piece trestle at the rate of (1,30 ± 0,05) kg per 10 min for each burner. Method C uses a test piece 1,5 m in length and consumes propane gas through the burner at the rate of (565 ± 10) g per 50 min. Method D uses a test piece 1,2 m in length and consumes propane gas through the burner at the rate of 150 l/hr (D1) or 190 l/hr (D2).

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 340:2013(Main)
Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method (ISO 340:2013)
EN ISO 340:2013

This International Standard specifies a method for assessing, on a small scale, the reaction of a conveyor belt to an ignition flame source. It is applicable to conveyor belts having a textile carcass as well as steel cord conveyor belts.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12881-2:2005+A1:2008(Main)
Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test
EN 12881-2:2005+A1:2008

This part of EN 12881 describes a method of test for the assessment of fire propagation along a conveyor belt when the belt is exposed to a heat source.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 340:2022(Main)
Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method (ISO 340:2022)
EN ISO 340:2022

This document specifies a method for assessing, on a small scale, the reaction of a conveyor belt to an
ignition flame source. It is applicable to conveyor belts having a textile carcass as well as steel cord
conveyor belts.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14973:2016(Main)
Conveyor belts for use in underground installations - Electrical and flammability safety requirements
EN 14973:2015

This European Standard specifies electrical and flammability safety requirements for conveyor belts
intended for use in underground installations, in the presence of flammable or non-flammable
atmospheres.
Conveyor belts covered by this European Standard and intended for use in flammable atmospheres are
intended for use on conveyor belt installations (machinery in mines). The belt is a component or part of
equipment, which can be incorporated into the conveyor, which is an equipment of Group I, Category
M2, as defined in 3.2.2 of EN 13463-1:2009.
This European Standard is not applicable to light conveyor belts as described in EN ISO 21183-1:2006
nor is it applicable to conveyor belts which are manufactured before the date of publication of this
document by CEN.
This European Standard deals with those significant hazards detailed in A.1.
Attention is drawn to Annexes ZA and ZB.
NOTE A summary of the requirements of this European Standard is given in Table 2. This is intended for
quick reference only.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12882:2015(Main)
Conveyor belts for general purpose use - Electrical and flammability safety requirements
EN 12882:2015

This European Standard specifies electrical and flammability safety requirements for general purposeconveyor belts not intended for use in underground installations and a means of categorizing conveyor belts interms of the level of safety sought in their end use application. This European Standard does not provide
electrical safety requirements for volume resistance which may be measured by the methods in
EN ISO 21178 and which is relevant to some types of light conveyor belts.
This European Standard is not applicable to conveyor belts which are manufactured before the date of
publication of this document by CEN.
NOTE 1 Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive
atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present
standard is not intended to provide means of complying with the essential health and safety requirements of
Directive 94/9/EC, this being covered in EN 14973.
NOTE 2 EN 12882 is not a product standard but is intended to help users of conveyor belts to select the required
electrical and flammability safety properties needed following a suitable risk assessment. No requirements are, therefore,
included for marking, information to be supplied, etc., these matters being covered in relevant product standards such
as EN ISO 14890 and EN ISO 15236-1.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12881-1:2014(Main)
Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests
EN 12881-1:2014

EN 12881-1 describes four methods for measuring the propagation of a flame along a conveyor belt which has been exposed to a relatively high localized heat source such as a fire. The damage suffered by the conveyor belt, as well as its tendency to support combustion, is measured by observing the extent to which the fire spreads along the test piece. Method A uses a test piece 2 m in length and consumes propane gas through the burner at the rate of (1,30 ± 0,05) kg per 10 min. Method B uses a test piece 2,5 m in length and consumes propane gas through two burners mounted above and below the test piece trestle at the rate of (1,30 ± 0,05) kg per 10 min for each burner. Method C uses a test piece 1,5 m in length and consumes propane gas through the burner at the rate of (565 ± 10) g per 50 min. Method D uses a test piece 1,2 m in length and consumes propane gas through the burner at the rate of 150 l/hr (D1) or 190 l/hr (D2).

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day