kSIST FprEN ISO 18636:2026
(Main)Rubber or plastic coated fabrics - Mechanical properties - Determination of the elongation under load and the residual deformation (ISO/FDIS 18636:2026)
Rubber or plastic coated fabrics - Mechanical properties - Determination of the elongation under load and the residual deformation (ISO/FDIS 18636:2026)
This document describes the method of determination of the elongation under load and the residual deformation of coated fabrics.
Mit Kautschuk oder Kunststoff beschichtete Textilien - Mechanische Eigenschaften - Bestimmung der Dehnung unter Last und der verbleibenden Verformung (ISO/FDIS 18636:2026)
Supports textiles revêtus de caoutchouc ou de plastique - Propriétés mécaniques - Détermination de l'allongement sous charge et de la déformation résiduelle (ISO/FDIS 18636:2026)
Gumirane ali plastificirane tekstilije - Mehanske lastnosti - Ugotavljanje raztezka pri obremenitvi in rezidualne deformacije (ISO/FDIS 18636:2026)
General Information
- Status
- Not Published
- Public Enquiry End Date
- 29-Sep-2025
- Technical Committee
- ITEK - Textile and textile products
- Current Stage
- 5020 - Formal vote (FV) (Adopted Project)
- Start Date
- 11-Jun-2026
- Due Date
- 30-Jul-2026
- Completion Date
- 12-Jun-2026
Relations
- Effective Date
- 14-Apr-2025
Overview
kSIST FprEN ISO 18636:2026 establishes a standardized method for determining the mechanical properties of rubber or plastic coated fabrics, specifically focusing on the measurement of elongation under load and residual deformation. Developed by the Slovenian Institute for Standardization (SIST) and aligned with ISO/FDIS 18636:2026, this standard provides clear guidance for quality control and product performance evaluation in industries utilizing coated textiles.
Assessing the elongation and deformation properties of coated fabrics is essential for ensuring material durability, structural integrity, and suitability for a wide range of technical applications. Compliance with this standard facilitates comparability across products and suppliers, supporting international trade, manufacturing, and regulatory requirements.
Key Topics
- Elongation Under Load: The document specifies procedures for marking, loading, and measuring coated fabric strips to determine their percentage elongation when subjected to a controlled force. This measures the fabric's ability to stretch under mechanical stress without rupture.
- Residual Deformation: After removing the load, the standard describes how to measure and report the permanent length change of the fabric, providing insight into its dimensional stability once stress is released.
- Testing Conditions: Detailed instructions are provided for specimen preparation, required apparatus (manual loading devices, calibrated rulers and calipers, hot air oven), and test atmosphere, ensuring replicability of results.
- Optional Heat Exposure: For certain applications, the standard includes procedures for assessing residual deformation after samples are exposed to elevated temperatures, simulating aging or demanding environmental conditions.
- Reporting Requirements: The standard outlines necessary information for test reports, ensuring traceability and clarity in communicating results.
Applications
The methodologies outlined in kSIST FprEN ISO 18636:2026 are applicable to a broad spectrum of industries and use cases where rubber or plastic coated fabrics are integral, including:
- Construction and Architecture: For coated fabrics used in permanent and temporary structures such as tension membranes, awnings, and shelters, where elongation and stability under load are critical.
- Furniture and Upholstery: Ensuring coated fabrics used in seating, coverings, and interior decor maintain their shape and resist permanent deformation during daily use.
- Automotive and Transportation: Evaluating materials for seat covers, tarpaulins, or protective linings subjected to mechanical loads.
- Industrial and Protective Equipment: Assessing fabrics utilized for conveyor belts, protective clothing, or containment liners that experience repeated stress and environmental exposure.
- Quality Control and Product Development: Supporting manufacturers and quality assurance professionals in benchmarking materials, certifying performance, and complying with customer specifications and regulatory standards.
Adhering to this standard helps manufacturers and clients ensure consistent material performance across supply chains, mitigates the risk of product failure, and supports the development of long-lasting textile solutions.
Related Standards
Several international standards complement or support kSIST FprEN ISO 18636:2026, including:
- ISO 1419:2019: Rubber- or plastics-coated fabrics - Accelerated ageing tests, referenced for optional pre-conditioning by heat exposure.
- ISO 2231: Rubber- or plastics-coated fabrics - Standard atmospheres for conditioning and testing, ensuring consistency in test environments.
- EN 12280-1: European standard for hot air oven specifications used in fabric testing.
- Other standards in ICS 59.080.40: Covering coated fabrics, their testing methods, and performance characteristics.
By adopting kSIST FprEN ISO 18636:2026, organizations can achieve harmonized quality assessment of coated fabrics, ensuring international compatibility and reliable product performance in demanding applications.
Get Certified
Connect with accredited certification bodies for this standard
Control Union Certifications
Global certification for agriculture and sustainability.
Hohenstein Institut
Textile testing and certification.
Bureau Veritas Bangladesh
Bureau Veritas certification services in Bangladesh.
Sponsored listings
Frequently Asked Questions
kSIST FprEN ISO 18636:2026 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Rubber or plastic coated fabrics - Mechanical properties - Determination of the elongation under load and the residual deformation (ISO/FDIS 18636:2026)". This standard covers: This document describes the method of determination of the elongation under load and the residual deformation of coated fabrics.
This document describes the method of determination of the elongation under load and the residual deformation of coated fabrics.
kSIST FprEN ISO 18636:2026 is classified under the following ICS (International Classification for Standards) categories: 59.080.40 - Coated fabrics. The ICS classification helps identify the subject area and facilitates finding related standards.
kSIST FprEN ISO 18636:2026 has the following relationships with other standards: It is inter standard links to SIST EN 15977:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
kSIST FprEN ISO 18636:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 18636:2025
01-september-2025
Gumirane ali plastificirane tekstilije - Mehanske lastnosti - Ugotavljanje raztezka
pri obremenitvi in rezidualne deformacije (ISO/DIS 18636:2025)
Rubber or plastic coated fabrics - Mechanical properties - Determination of the
elongation under load and the residual deformation (ISO/DIS 18636:2025)
Mit Kautschuk oder Kunststoff beschichtete Textilien - Mechanische Eigenschaften -
Bestimmung der Dehnung unter Last und der verbleibenden Verformung (ISO/DIS
18636:2025)
Supports textiles revêtus de caoutchouc ou de plastique - Propriétés mécaniques -
Détermination de l'allongement sous charge et de la déformation résiduelle (ISO/DIS
18636:2025)
Ta slovenski standard je istoveten z: prEN ISO 18636
ICS:
59.080.40 Površinsko prevlečene Coated fabrics
tekstilije
oSIST prEN ISO 18636:2025 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN ISO 18636:2025
oSIST prEN ISO 18636:2025
DRAFT
International
Standard
ISO/DIS 18636
ISO/TC 45/SC 4
Rubber or plastic coated fabrics —
Secretariat: DSM
Mechanical properties —
Voting begins on:
Determination of the elongation
2025-07-21
under load and the residual
Voting terminates on:
deformation
2025-10-13
Supports textiles revêtus de caoutchouc ou de plastique —
Propriétés mécaniques — Détermination de l'allongement sous
charge et de la déformation résiduelle
ICS: 59.080.40
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 18636:2025(en)
oSIST prEN ISO 18636:2025
DRAFT
ISO/DIS 18636:2025(en)
International
Standard
ISO/DIS 18636
ISO/TC 45/SC 4
Rubber or plastic coated fabrics —
Secretariat: DSM
Mechanical properties —
Voting begins on:
Determination of the elongation
under load and the residual
Voting terminates on:
deformation
Supports textiles revêtus de caoutchouc ou de plastique —
Propriétés mécaniques — Détermination de l'allongement sous
charge et de la déformation résiduelle
ICS: 59.080.40
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2025
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 18636:2025(en)
ii
oSIST prEN ISO 18636:2025
ISO/DIS 18636:2025(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 Preparation of test specimens . 2
7 Mechanical loading test . 2
8 Residual deformation after heat exposure and mechanical loading (optional) . 3
9 Calculation . 3
10 Test report . 4
iii
oSIST prEN ISO 18636:2025
ISO/DIS 18636:2025(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which
...