SIST EN ISO 11210:2023
(Main)Jewellery and precious metals - Determination of platinum - Gravimetry using ammonium chloride (ISO 11210:2023)
Jewellery and precious metals - Determination of platinum - Gravimetry using ammonium chloride (ISO 11210:2023)
This document specifies a gravimetric method for the determination of platinum in platinum alloys. The platinum content of sample lies preferably between 50 and 999 parts per thousands (‰) by weight. Fineness above 999 ‰ can be determined using a spectroscopy method by difference (e.g. ISO 15093).
This method is also intended to be used as one of the recommended methods for the determination of fineness in jewellery alloys covered by ISO 9202.
Schmuck und Edelmetalle - Bestimmung von Platin - Gravimetrie mittels Ammoniumchlorid (ISO 11210:2023)
Dieses Dokument legt ein gravimetrisches Verfahren zur Bestimmung von Platin für ein als homogen angesehenes Material fest. Der Platingehalt der Probe liegt vorzugsweise zwischen 50 und 999 Massenteilen je Tausend (‰). Der Feingehalt über 999 ‰ kann mit einer spektroskopischen Differenzverfahren bestimmt werden (z. B. ISO 15093).
Dieses Verfahren ist als eines der empfohlenen Verfahren für die Bestimmung des Feingehalts von Schmucklegierungen nach ISO 9202 vorgesehen.
Joaillerie, bijouterie et métaux précieux - Dosage du platine - Méthode gravimétrique utilisant le chlorure d’ammonium (ISO 11210:2023)
Le présent document spécifie une méthode gravimétrique de dosage du platine sur un matériau considéré homogène. La teneur en platine des échantillons est de préférence comprise entre 50 et 999 millièmes (‰) en masse. Les titres supérieurs à 999 ‰ peuvent être déterminés à l’aide d’une méthode de spectroscopie par différence (par exemple ISO 15093).
Cette méthode est également destinée à être utilisée comme l’une des méthodes recommandées pour la détermination du titre dans les alliages pour la bijouterie-joaillerie couverts par l’ISO 9202.
Nakit in plemenite kovine - Določevanje platine - Gravimetrija z amonijevim kloridom (ISO 11210:2023)
Ta dokument določa gravimetrično metodo za določevanje platine v zlitinah platine. Vsebnost platine v vzorcu bi morala biti med 50 in 999 delov na tisoč (‰) glede na težo. Finost nad 999 ‰ je mogoče določiti z metodo spektroskopije glede na razlike (npr. standard ISO 15093).
Metoda je namenjena tudi za uporabo kot priporočena metoda za določanje finosti v zlitinah za nakit, ki je zajeta v standardu ISO 9202.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 11210:2023
01-maj-2023
Nakit in plemenite kovine - Določevanje platine - Gravimetrija z amonijevim
kloridom (ISO 11210:2023)
Jewellery and precious metals - Determination of platinum - Gravimetry using ammonium
chloride (ISO 11210:2023)
Schmuck und Edelmetalle - Bestimmung von Platin - Gravimetrie mittels
Ammoniumchlorid (ISO 11210:2023)
Joaillerie, bijouterie et métaux précieux - Dosage du platine - Méthode gravimétrique
utilisant le chlorure d’ammonium (ISO 11210:2023)
Ta slovenski standard je istoveten z: EN ISO 11210:2023
ICS:
39.060 Nakit Jewellery
SIST EN ISO 11210:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 11210:2023
---------------------- Page: 2 ----------------------
SIST EN ISO 11210:2023
EN ISO 11210
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2023
EUROPÄISCHE NORM
ICS 39.060 Supersedes EN ISO 11210:2016
English Version
Jewellery and precious metals - Determination of platinum
- Gravimetry using ammonium chloride (ISO 11210:2023)
Joaillerie, bijouterie et métaux précieux - Dosage du Schmuck und Edelmetalle - Bestimmung von Platin -
platine - Méthode gravimétrique utilisant le chlorure Gravimetrie mittels Ammoniumchlorid (ISO
d'ammonium (ISO 11210:2023) 11210:2023)
This European Standard was approved by CEN on 19 February 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11210:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 11210:2023
EN ISO 11210:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 11210:2023
EN ISO 11210:2023 (E)
European foreword
This document (EN ISO 11210:2023) has been prepared by Technical Committee ISO/TC 174 "Jewellery
and precious metals" in collaboration with CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2023, and conflicting national standards
shall be withdrawn at the latest by September 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11210:2016.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 11210:2023 has been approved by CEN as EN ISO 11210:2023 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 11210:2023
---------------------- Page: 6 ----------------------
SIST EN ISO 11210:2023
INTERNATIONAL ISO
STANDARD 11210
Third edition
2023-02
Jewellery and precious metals —
Determination of platinum —
Gravimetry using ammonium chloride
Joaillerie, bijouterie et métaux précieux — Dosage du platine —
Méthode gravimétrique utilisant le chlorure d’ammonium
Reference number
ISO 11210:2023(E)
© ISO 2023
---------------------- Page: 7 ----------------------
SIST EN ISO 11210:2023
ISO 11210:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2023 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 11210:2023
ISO 11210:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Reagents . 1
6 Apparatus . 2
7 Sampling . 2
8 Procedure .2
8.1 Preliminary analysis . 2
8.2 Preparation of samples free of silver . 2
8.3 Preparation of samples containing silver . 3
8.4 Precipitation of platinum with ammonium chloride . 3
9 Calculation and expression of results . 4
9.1 Calculation . 4
9.2 Repeatability . 5
10 Test report . 5
Annex A (informative) Reduction apparatus example . 6
Bibliography . 7
iii
© ISO 2023 – All rights reserved
---------------------- Page: 9 ----------------------
SIST EN ISO 11210:2023
ISO 11210:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by the European Committee for Standardization (CEN) Technical
Committee CEN/SSM21, Precious metals — Applications in jewellery and associated products, in
collaboration with ISO Technical Committee TC 174, Jewellery and precious metals, in accordance with
the agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This third edition cancels and replaces the second edition (ISO 11210:2014), which has been technically
revised.
The main changes are as follows:
— extension of the scope of application to all precious metal alloys beyond the jewellery sector;
— clarification of the fineness for which the test is suitable;
— addition of a specific preparation for samples containing a significant amount of silver in Clause 8;
— addition of an alternative method for the filtration in Clause 8;
— harmonization of method with ISO 11490.
Any feedback or questions on this document should be directed to the user’s national standards body. A
compl
...
SLOVENSKI STANDARD
oSIST prEN ISO 11210:2022
01-julij-2022
Nakit in plemenite kovine - Določevanje platine v zlitinah platine - Gravimetrično
določanje po obarjanju z amonijevim kloridom (ISO/DIS 11210:2022)
Jewellery and precious metals - Determination of platinum in platinum alloys -
Gravimetric determination after precipitation using ammonium chloride (ISO/DIS
11210:2022)
Schmuck und Edelmetalle - Bestimmung von Platin in Platinlegierungen -
Gravimetrisches Verfahren nach Fällung mittels Ammoniumchlorid (ISO/DIS
11210:2022)
Joaillerie, bijouterie et métaux précieux - Dosage du platine dans les alliages de platine -
Méthode gravimétrique après précipitation par le chlorure d’ammonium (ISO/DIS
11210:2022)
Ta slovenski standard je istoveten z: prEN ISO 11210
ICS:
39.060 Nakit Jewellery
oSIST prEN ISO 11210:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 11210:2022
---------------------- Page: 2 ----------------------
oSIST prEN ISO 11210:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 11210
ISO/TC 174 Secretariat: DIN
Voting begins on: Voting terminates on:
2022-05-25 2022-08-17
Jewellery and precious metals — Determination of
platinum in platinum alloys — Gravimetric determination
after precipitation using ammonium chloride
ICS: 39.060
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 11210:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 3 ----------------------
oSIST prEN ISO 11210:2022
ISO/DIS 11210:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2022 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 11210:2022
ISO/DIS 11210:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Reagents . 2
6 Apparatus . 2
7 Sampling . 2
8 Procedure .2
8.1 Preparation of samples free of silver . 3
8.2 Preparation of samples containing silver . 3
8.3 Precipitation of platinum with ammonium chloride . 3
9 Calculation and expression of results . 4
9.1 Calculation . 4
9.2 Repeatability . 5
10 Test report . 5
Annex A (informative) Reduction apparatus example . 6
Bibliography . 7
iii
© ISO 2022 – All rights reserved
---------------------- Page: 5 ----------------------
oSIST prEN ISO 11210:2022
ISO/DIS 11210:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
The committee responsible for this document is ISO/TC 174, Jewellery.
This third edition cancels and replaces the second edition (ISO 11210:2014), which has been technically
revised with the following changes:
— Extension of the scope of application to all precious metal alloys beyond the jewellery sector;
— Clarification of the fineness for which the test is suitable;
— Addition of a specific preparation for samples containing a significant amount of silver in Clause 8;
— Addition of an alternative method for the filtration in Clause 8;
— Harmonization of method with ISO 11490.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
© ISO 2022 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 11210:2022
DRAFT INTERNATIONAL STANDARD ISO/DIS 11210:2022(E)
Jewellery and precious metals — Determination of
platinum in platinum alloys — Gravimetric determination
after precipitation using ammonium chloride
1 Scope
This document specifies a gravimetric method for the determination of platinum in platinum alloys. The
platinum content of the sample lies preferably between 50 and 999 parts per thousand (‰) by weight.
Fineness above 999 ‰ can be determined using a spectroscopy method by difference (e.g. ISO 15093).
This method is also intended to be used as one of the recommended methods for the determination of
fineness in jewellery alloys covered by ISO 9202.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 11596, Jewellery and precious metals — Sampling of precious metals and precious metal alloys
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
3.1
platinum sponge
platinum obtained after calcination of the diammonium hexachloroplatinate precipitate
3.2
vacuum system
vacuum filtration system for the filtration of one or several samples simultaneou
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.