iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60936-1:2004/A1:2004

(Amendment)

Maritime navigation and radiocommunication equipment and systems - Radar -- Part 1: Shipborne radar - Performance requirements - Methods of testing and required test results

Maritime navigation and radiocommunication equipment and systems - Radar -- Part 1: Shipborne radar - Performance requirements - Methods of testing and required test results

EN following parallel vote

Navigations- und Funkkommunikationsgeräte und -systeme für die Seeschifffahrt - Radar -- Teil 1: Radar für die Seeschifffahrt - Leistungsanforderungen - Prüfverfahren und geforderte Prüfergebnisse

Matériels et systèmes de navigation et de radiocommunication maritimes - Radar -- Partie 1: Radars de navire - Exigences de fonctionnement - Méthodes d'essai et résultats d'essai exigés

Maritime navigation and radiocommunication equipment and systems - Radar - Part 1: Shipborne radar - Performance requirements - Methods of testing and required test results - Amendment A1 (IEC 60936-1:1999/A1:2002)

General Information

Status
Withdrawn
Publication Date
30-Jun-2004
Withdrawal Date
22-Jul-2018
ICS
47.020.70 - Navigation and control equipment
Technical Committee
SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
23-Jul-2018
Due Date
15-Aug-2018
Completion Date
23-Jul-2018
Ref Project
EN 60936-1:2000/A1:2002 - Maritime navigation and radiocommunication equipment and systems - Radar - Part 1: Shipborne radar - Performance requirements - Methods of testing and required test results

Relations

Replaced By
SIST EN 62388:2008 - Maritime navigation and radiocommunication equipment and systems - Shipborne radar - Performance requirements, methods of testing and required test results
Effective Date
29-Jan-2023
Replaced By
SIST EN 62388:2008 - Maritime navigation and radiocommunication equipment and systems - Shipborne radar - Performance requirements, methods of testing and required test results
Effective Date
07-Jun-2022
Amends
SIST EN 60936-1:2004 - Maritime navigation and radiocommunication equipment and systems - Radar -- Part 1: Shipborne radar - Performance requirements - Methods of testing and required test results
Effective Date
29-Jan-2023
Amends
SIST EN 60936-1:2004 - Maritime navigation and radiocommunication equipment and systems - Radar -- Part 1: Shipborne radar - Performance requirements - Methods of testing and required test results
Effective Date
21-Sep-2010
Amends
SIST EN 60936-1:2004 - Maritime navigation and radiocommunication equipment and systems - Radar -- Part 1: Shipborne radar - Performance requirements - Methods of testing and required test results
Effective Date
07-Jun-2022

Buy Standard

EN 60936-1:2004/A1:2004EN 60936-1:2004/A1:2004
PreviousNext
Amendment
EN 60936-1:2004/A1:2004
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST EN 60936-1:2004/A1:2004

STANDARD
julij 2004
Maritime navigation and radiocommunication equipment and systems - Radar - Part
1: Shipborne radar - Performance requirements - Methods of testing and required
test results - Amendment A1 (IEC 60936-1:1999/A1:2002)
ICS 47.020.70 Referenčna številka
SIST EN 60936-1:2004/A1:2004(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60936-1/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2002
ICS 47.020.70
English version
Maritime navigation and radiocommunication equipment and systems -
Radar
Part 1: Shipborne radar -
Performance requirements -
Methods of testing and required test results
(IEC 60936-1:1999/A1:2002)
Matériels et systèmes de navigation Navigations- und
et de radiocommunication maritimes - Funkkommunikationsgeräte und -systeme
Radar für die Seeschifffahrt -
Partie 1: Radars de navire - Radar
Exigences de fonctionnement - Teil 1: Radar für die Seeschifffahrt -
Méthodes d'essai et résultats Leistungsanforderungen -
d'essai exigés Prüfverfahren und geforderte
(CEI 60936-1:1999/A1:2002) Prüfergebnisse
(IEC 60936-1:1999/A1:2002)
This amendment A1 modifies the European Standard EN 60936-1:2000; it was approved by CENELEC
on 2002-09-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this amendment the status of a national standard without any
alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by trans
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 301 843-6 V1.1.1:2006(Main)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services; Part 6: Specific conditions for Earth Stations on board Vessels operating in frequency bands above 3 GHz
ETSI EN 301 843-6 V1.1.1 (2006-01)

The present document together with EN 301 843-1 [1], covers the assessment of Earth Stations on board Vessels (ESVs) transmitting above 3 GHz in the Fixed Satellite Service (FSS) as defined in annex A and ancillary equipment in respect of ElectroMagnetic Compatibility (EMC). Technical specifications related to the antenna port and emissions from the enclosure port of Earth Stations on board Vessels are not included in the present document. Such technical specifications are found in the related product standards for the effective use of the radio spectrum. The present document specifies the applicable test conditions, performance assessment, and performance criteria for Earth Stations on board Vessels and the associated ancillary equipment. In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present document and EN 301 843-1 [1], the provisions of the present document take precedence. The electromagnetic environment used in the present document to develop the technical specifications encompasses the electromagnetic environment onboard ships as identified in EN 60945 [4].

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 301 033 V1.2.1:2006(Main)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Technical characteristics and methods of measurement for shipborne watchkeeping receivers for reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and VHF bands
ETSI EN 301 033 V1.2.1 (2005-12)

The present document states the minimum operational and performance requirements for shipborne receivers intended to be connected to an external installation, including a decoder for DSC, and used as receivers for watchkeeping DSC on board ships operating in the mobile MF, MF/HF and VHF band allocated in the ITU Radio Regulations [1] to the maritime mobile service, both in connection with distress and safety communication and in connection with general communication.
These requirements include the relevant provisions of the ITU Radio Regulations [1], ITU-R Recommendations M.493-11 [3], M.541-9 [11], M.489-2 [10] and the IMO Resolutions A.803(19), A.804(19), A.806(19) and A.694(17). The present document specifies also technical characteristics, methods of testing and required test results for dedicated watchkeeping receivers for use with radio installations in the GMDSS as required by chapter IV of the SOLAS. It covers both receivers with analogue output or with digital DSC signal output interfaces or with both. DSC watchkeeping receivers may be a separate equipment or be integrated with a DSC or radiotelephone equipment. For integrated equipment the present document specifies the requirements and methods of testing of the DSC watchkeeping receivers only. DSC watchkeeping receivers can be either fixed-frequency receivers or, in MF/HF bands, scanning receivers. Requirements for the DSC equipment or radiotelephone equipment are given in EN 300 338 [13], EN 300 162-1 [12] and EN 300 373-1 [14] respectively.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 225 V1.4.1:2006(Main)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Technical characteristics and methods of measurement for survival craft portable VHF radiotelephone apparatus
ETSI EN 300 225 V1.4.1 (2004-12)

The present document states the minimum technical characteristics required for portable VHF radiotelephones operating in the bands between 156 MHz and 174 MHz allocated to the Maritime Mobile Services by the Radio Regulations (see Radio Regulations, Appendices 18 [1] and 19 [2]) and suitable for use in survival craft and, optionally, on board ships at sea. The requirements detailed in the Radio Regulations, International Convention for the Safety Of Life At Sea SOLAS 1974 and the International Maritime Organization Resolutions A.694(17) [4] and A.809(19) [3] are incorporated in the present document.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 162-1 V1.4.1:2006(Main)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Part 1: Technical characteristics and methods of measurement
ETSI EN 300 162-1 V1.4.1 (2006-05)

The present document specifies the minimum requirements for shipborne Very High Frequency (VHF) transmitters and receivers capable of voice and Digital Selective Calling (DSC), fitted with an external antenna connector for use on board ships. The present document lays down minimum requirements for VHF radio transmitters and receivers operating in certain frequency bands allocated to the maritime mobile service using both 25 kHz and 12,5 kHz channels, and incorporates the requirements of the relevant recommendations of the International Maritime Organization (IMO).

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ETS 300 459 E1:2006(Main)
Satellite Earth Stations and Systems (SES); Network Control Facilities (NCF) for Maritime Mobile Earth Stations (MMES) operating in the 1,5/1,6 GHz and 11/12/14 GHz bands providing Low Bit Rate Data Communications (LBRDC
ETSI ETS 300 459 ed.1 (1996-05)

This European Telecommunication Standard (ETS) provides specifications for the standardization of the minimum required Network Control Facilities (NCF) characteristics for Maritime Mobile Earth Stations (MMESs) with both transmit and receive capabilities in order to ensure that the network operator is able to suppress and enable the transmissions from the MMESs. In particular, these facilities will allow certain interference situations, resulting from the emissions of interfering MMESs, to be terminated. This ETS defines specifications for the control facilities in an MMES network operating Low Bit Rate Data Communications (LBRDCs), as defined in ETS 300 460 [1]. This ETS deals with specifications defined in order to protect other users of the frequency spectrum from unacceptable interference.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ETS 300 740 E1:2006(Main)
Satellite Earth Stations and Systems (SES); Maritime Mobile Earth Stations (MMES) operating in the 1,5/1,6 GHz bands providing Low Bit Rate Data Communications (LBRDC) in the Maritime Mobile Satellite Service (MMSS), not intended for distress and safety communications
ETSI ETS 300 740 ed.1 (1997-04)

This European Telecommunication Standard (ETS) provides specifications for the standardization of the characteristics of Maritime Mobile Earth Stations (MMESs) not providing those distress and safety functions required by the International Maritime Organization (IMO) with both transmit and receive capabilities in order to limit interference to radio communications services. The geostationary satellite networks referred to in this ETS operate under the Maritime Mobile Satellite Service (MMSS). The MMESs operate as part of a geostationary satellite network providing Low Bit-Rate Data Communications (LBRDC). The MMESs could consist of a number of modules including a keyboard interface to the user.
The main specifications are contained in three categories related to:
- safety: to protect persons from potentially dangerous RF power densities;
- unwanted emissions: to protect terrestrial and satellite radio services from harmful interference;
- MMES control and monitoring: to specify a minimum set of Control and Monitoring Functions (CMF) to be implemented on each MMES in order to minimize the probability that they originate unwanted transmissions that may give rise to harmful interference to other systems.
Additionally to these specifications the satellite operator may require other specifications or different limits.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61162-402:2006(Main)
Maritime navigation and radiocommunication equipment and systems - Digital interfaces -- Part 402: Multiple talkers and multiple listeners - Ship systems interconnection - Documentation and test requirements
EN 61162-402:2005

This standard series, IEC 61162-400 and upwards, specifies a communication protocol for use in integrated ship systems. It also specifies an interface description language for use together with the protocol, a set of rules for the use of this language and a set of standard interfaces described in the language. This part of the standard specifies a minimum set of tests to be done, test results to be achieved and documents that shall be available for all implementations of general protocol software and applications that are compliant with the IEC 61162-4 standard. Although this set of standard documents is collectively referred to as IEC 61162-4, the actual part numbers are in the 400-series (see 1.4 of IEC 61162-400). The tests and documentation requirements do not cover electrical, physical or environmental requirements that may apply to the use of software or computers onboard ships. Such requirements may be covered by IEC 60945 or IEC 60092-504. Other standards may also be applicable. This standard does not necessarily cover all requirements from classification societies or other authorities. It is the responsibility of the user of this standard to ensure that all appropriate regulations are addressed. This standard contains tests to check that an application using the IEC 61162-4 protocol adheres to its advertised interface specification. These tests cannot guarantee the correct functionality of that application beyond the possibility of connecting it to the network and with a limited degree of accuracy in the messages transferred. This standard does not cover the system in which the IEC 61162-4 communication standard is used. Additional requirements will normally apply to the total system configuration. Fundamental requirements relating to ensuring reliable and timely transfer of data across data communication links are included in other standards associated with the integration of equipment such as IEC 60092-504 and IEC 61209. This standard does not contain tests to verify compliance with these requirements. In addition, specific equipment related standards may also contain requirements for correctness and timeliness of data transmissions. Neither does this standard contain any tests to verify such requirements. Thus, results from tests carried out in accordance with this standard cannot be used to demonstrate compliance with the requirements of any other standards for system or equipment functionality. The test plan only specifies general tests of the protocols and a limited set of other general properties (black box tests). The test procedures will not generally cover tests of operating systems, communication libraries or other software components that are used to implement the standard. Neither does this standard specify any tests related to the way the system is implemented (white or glass box testing). The test procedures are general in nature and do not generally specify detailed test programs and procedures. The procedures specify a minimum set of functional aspects that need to be tested, with, in some cases, a minimum required set of excitations and corresponding required responses. The testers must develop the detailed procedures and test tools themselves.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61108-4:2005(Main)
Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) -- Part 4: Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment - Performance requirements, methods of testing and required test results
EN 61108-4:2004

Specifies the minimum operational and performance requirements, methods of testing and required test results conforming to performance standards not inferior to those adopted by the IMO in resolution MSC.114(73). Takes into account IMO resolution A.694(17) and is associated with EN 60945.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62252:2005(Main)
Maritime navigation and radiocommunication equipment and systems - Radar for craft not in compliance with IMO SOLAS Chapter V - Performance requirements, methods of test and required test results
EN 62252:2004

Specifies the minimum performance requirements for testing and required test results for conformance of radar not fully compliant with the IMO Performance Standard for radar/radar plotting (MSC.64(67)). Covers radar classes A, B and C. Is based on EN 60872, EN 60936 and takes into account EN 60945.

  • Standard
    150 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61108-2:2004(Main)
Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) -- Part 2: Global navigation satellite system (GLONASS) - Receiver equipment - Performance standards, methods of testing and required test results
EN 61108-2:1998

Specifies minimum performance standards, methods of testing and required test results for GLONASS shipborne receiver equipment, based upon the IMO Resolution MSC.53(66), which uses the signals from the Russian Ministry of Defence Global Navigation Satellite System, in order to determine position.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day