SIST EN ISO 8611-2:2022

SLOVENSKI STANDARD
SIST EN ISO 8611-2:2022
01-marec-2022
Nadomešča:
SIST EN ISO 8611-2:2013
SIST EN ISO 8611-2:2013/A1:2017
Palete za ravnanje z materiali - Ravne palete - 2. del: Zahtevane lastnosti in izbira
preskusa (ISO 8611-2:2021)
Pallets for materials handling - Flat pallets - Part 2: Performance requirements and
selection of tests (ISO 8611-2:2021)
Paletten für den Gütertransport - Flachpaletten - Teil 2: Leistungsanforderungen und
Auswahl von Prüfungen (ISO 8611-2:2021)
Palettes pour la manutention - Palettes plates - Partie 2: Exigences de performance et
sélection des essais (ISO 8611-2:2021)
Ta slovenski standard je istoveten z: EN ISO 8611-2:2022
ICS:
55.180.20 Večnamenske palete General purpose pallets
SIST EN ISO 8611-2:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 8611-2:2022

---------------------- Page: 2 ----------------------
SIST EN ISO 8611-2:2022


EN ISO 8611-2
EUROPEAN STANDARD

NORME EUROPÉENNE

January 2022
EUROPÄISCHE NORM
ICS 55.180.20 Supersedes EN ISO 8611-2:2012, EN ISO 8611-
2:2012/A1:2016
English Version

Pallets for materials handling - Flat pallets - Part 2:
Performance requirements and selection of tests (ISO
8611-2:2021)
Palettes pour la manutention - Palettes plates - Partie Paletten für den Gütertransport - Flachpaletten - Teil 2:
2: Exigences de performance et sélection des essais Leistungsanforderungen und Auswahl von Prüfungen
(ISO 8611-2:2021) (ISO 8611-2:2021)
This European Standard was approved by CEN on 5 January 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8611-2:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 8611-2:2022
EN ISO 8611-2:2022 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 8611-2:2022
EN ISO 8611-2:2022 (E)
European foreword
This document (EN ISO 8611-2:2022) has been prepared by Technical Committee ISO/TC 51 "Pallets
for unit load method of materials handling" in collaboration with Technical Committee CEN/TC 261
“Packaging” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2022, and conflicting national standards shall be
withdrawn at the latest by July 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 8611-2:2012.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 8611-2:2021 has been approved by CEN as EN ISO 8611-2:2022 without any
modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 8611-2:2022

---------------------- Page: 6 ----------------------
SIST EN ISO 8611-2:2022
INTERNATIONAL ISO
STANDARD 8611-2
Second edition
2021-12
Pallets for materials handling — Flat
pallets —
Part 2:
Performance requirements and
selection of tests
Palettes pour la manutention — Palettes plates —
Partie 2: Exigences de performance et sélection des essais
Reference number
ISO 8611-2:2021(E)
© ISO 2021

---------------------- Page: 7 ----------------------
SIST EN ISO 8611-2:2022
ISO 8611-2:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2021 – All rights reserved

---------------------- Page: 8 ----------------------
SIST EN ISO 8611-2:2022
ISO 8611-2:2021(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Test conditions .2
4.1 General . 2
4.2 Wooden pallets . 3
4.3 Metal pallets . 3
4.4 Plastic pallets . 3
4.5 Paper pallets . 3
4.6 Wood-based composite pallets . 3
5 Number of replicates .4
6 Performance requirements . .4
7 Selection of the tests .7
7.1 Intended use . 7
7.2 Handling of goods with racking and stacking . 8
7.3 Handling of goods with stacking without racking. 8
7.4 Handling of goods without racking or stacking . 8
7.5 Special applications . 8
7.5.1 General . 8
7.5.2 Automatic handling or conveyors . 9
7.5.3 Lifting with slings . 9
7.5.4 Resistance to impact . 9
7.5.5 Friction tests . 9
8 Test load — Nominal load .9
8.1 Strength tests . 9
8.2 Ultimate load, U . 9
8.3 Stiffness tests . . 9
8.4 Nominal load. 9
9 Duration for static stiffness tests .10
10 Number of impacts for dynamic tests .10
11 Test report .10
Annex A (informative) Plots of typical force versus deformation from pallet testsshowing
the deformation of ultimate load, U .11
Bibliography .13
iii
© ISO 2021 – All rights reserved

---------------------- Page: 9 ----------------------
SIST EN ISO 8611-2:2022
ISO 8611-2:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 51, Pallets for unit load method of
materials handling, in collaboration with the European Committee for Standardization (CEN) Technical
Committee CEN/TC 261, Packaging, in accordance with the Agreement on technical cooperation
between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 8611-2:2011), which has been technically
revised.
The main changes compared to the previous edition are as follows:
— Separate performance/deflection limits for the internal and external spans were specified for test
2a and 2b.
— It was clarified that test 5 applies for both twin track conveyors and narrow span beam racking.
— It was clarified in Table 2, that test 4a,b should be conducted for a pallet without racking or stacking
but only on the top deck.
— The determination of nominal load was clarified in Table 3.
A list of all parts in the ISO 8611 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
  © ISO 2021 – All rights reserved

---------------------- Page: 10 ----------------------
SIST EN ISO 8611-2:2022
ISO 8611-2:2021(E)
Introduction
The forces to which pallets are exposed during use vary significantly. The test procedures described in
ISO 8611-1 are approximate simulations of pallet use. These tests help the pallet designer to establish
an initial acceptable balance between the cost and the performance of a pallet design. It is intended
that all results of tests performed using this protocol be confirmed and verified using field trials before
publication of performance or the commercial implementation of a new pallet design.
The nominal load, determined according to this test protocol, does not represent a payload and cannot
be verified using field trials. The nominal load is a minimum payload level for use in determining
maximum working load according to the procedures in ISO 8611-3. The maximum working load can be
verified for a specified payload and intended use, using field trials. It is intended that the publication of
the maximum working load include a description of the payload and the intended modes of use of the
pallet.
It is essential to exercise care when comparing the results of tests with historic experience using
existing pallet designs. User expectations of pallet performance vary. Some require greater and some
accept lower levels of performance. Users are accepting different levels of risk when using pallets.
Because of the varied performance expectations of pallet users, it is possible that the results of tests do
not always reflect the user's perception of pallet performance in use.
It is possible that the nominal load does not reflect users' perception of pallet performance because
the nominal load does not represent a payload. It is intended that maximum working loads be used to
compare with the historic performance of existing pallet designs.
Regarding the use of the ISO 8611 series,
— ISO 8611-1 describes the test methods,
— this document describes the performance requirements and selection of tests, and
— ISO 8611-3 describes tests for determining maximum working loads for known payloads.
ISO 8611-1 and this document are required for determining nominal load. The nominal load is the
lowest safe load value for the specified support conditions, independent of the type of load (excluding
concentrated loads).
ISO 8611-1, this document and ISO 8611-3 are required for determining maximum working loads for
known payloads.
The nominal load for the intended use is established by the selection of tests in ISO 8611-1 and the
performance requirement is established from criteria in this document.
The following three types of intended use with specified support conditions are specified:
— handling of loaded pallets with racking and stacking;
— handling of loaded pallets without racking;
— handling of loaded pallets without racking or stacking.
To determine the maximum working load through testing given in ISO 8611-3, the deflection under the
known payload cannot exceed the limiting deflection (see ISO 8611-3:2011, 4.2, 4.3 and 4.4) established
in ISO 8611-1 and this document. The maximum working load is the greatest payload that a pallet can
be permitted to carry in a specific loading and support condition.
Guidance is given in ISO 8611-3:2011, Annex A as to the general effect on performance of different load
types and stabilization methods. These can only give guidance as to the likely result from tests with the
known payload.
Other tests for durability evaluation are specified in ISO 8611-1.
v
© ISO 2021 – All rights reserved

---------------------- Page: 11 ----------------------
SIST EN ISO 8611-2:2022

---------------------- Page: 12 ----------------------
SIST EN ISO 8611-2:2022
INTERNATIONAL STANDARD ISO 8611-2:2021(E)
Pallets for materials handling — Flat pallets —
Part 2:
Performance requirements and selection of tests
1 Scope
This document specifies the performance requirements to establish nominal loads for new flat pallets.
It also specifies the tests required for new flat pallets in various handling environments and the
performance requirements for tests with payloads. This document does not apply to pallets with a fixed
superstructure or a rigid, self-supporting container that can be mechanically attached to the pallet and
which contributes to the strength of the pallet.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 445, Pallets for materials handling — Vocabulary
ISO 8611-1:2021, Pallets for materials handling — Flat pallets — Part 1: Test methods
ISO 8611-3, Pallets for materials handling — Flat pallets — Part 3: Maximum working loads
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 445 and the following apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
3.1
breaking of one component
fracture of a structural element which significantly affects the stren
...