SIST EN 61000-4-30:2015/A1:2021
(Amendment)Amendment 1: Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods
Amendment 1: Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods
Elektromagnetische Verträglichkeit (EMV) - Teil 4-30: Prüf- und Messverfahren - Verfahren zur Messung der Spannungsqualität
Partie 4-30: Techniques d'essai et de mesure - Méthodes de mesure de la qualité de l'alimentation
Elektromagnetna združljivost (EMC) - 4-30. del: Preskusne in merilne tehnike - Metode merjenja kakovosti napetosti - Dopolnilo A1
General Information
Relations
SIST EN 61000-4-30:2015/A1:2021 Overview
SIST EN 61000-4-30:2015/A1:2021 is an important amendment to the European Standard for electromagnetic compatibility (EMC), specifically focusing on testing and measurement techniques for power quality measurement methods. Developed by CLC under the scope of electromagnetic compatibility, this amendment refines the procedures and requirements for accurate, reliable, and consistent measurement of power quality parameters.
This standard is harmonized with the corresponding IEC publication IEC 61000-4-30:2015/A1:2021 and is applicable throughout the CENELEC member countries. It serves as a vital reference for engineers, technicians, and organizations ensuring compliance with EMC directives and power quality regulations.
Key Topics Covered
Power Quality Measurement Techniques
The document provides enhanced guidelines on voltage quality measurement, focusing on parameters such as rms voltage, voltage events, and harmonic distortion under electromagnetic compatibility conditions.Measurement Uncertainty and Range
Amendments define stricter criteria for measurement uncertainty, especially for Class S instruments, requiring less than ±0.3% uncertainty for voltage (u) measurement. This ensures high accuracy in power quality assessments.RVC (Repeated Voltage Change) Event Detection
Updated logic for detecting RVC events includes:- Determining steady-state voltage over the previous 100/120 half-cycles.
- Criteria for the start and end of RVC events based on voltage steady-state changes.
- Application and removal of hysteresis during RVC events to improve detection reliability.
Crest Factor Specifications
Modifications clarify the requirements for the crest factor of current measurements, specifying changes in full-scale percentage measurement and accuracy levels to accommodate various classes of instruments.Standardization and Compliance Dates
The amendment was approved in April 2021, with mandatory implementation deadlines by January 2022 for national standard adoption and withdrawal of conflicting standards by April 2024.
Practical Applications
Power Quality Monitoring
SIST EN 61000-4-30:2015/A1:2021 ensures consistent measurement quality for utilities and industries monitoring supply voltage characteristics, harmonics, and transient events.EMC Testing Laboratories
Testing facilities use these standardized methods to validate equipment compliance with EMC requirements, ensuring robust product development and certification.Grid Operators and Energy Providers
Enables grid operators to accurately assess and mitigate power disturbances, improving the reliability and efficiency of electricity delivery systems.Equipment Manufacturers
Manufacturers apply the standard to verify power quality measurement capabilities of their devices, from meters to analyzers, ensuring market acceptance and regulatory compliance.
Related Standards
IEC 61000 Series
EN 61000-4-30 integrates with the broader IEC 61000 standards framework covering EMC testing and measurement methods, including immunity and emission assessments.EN 50160
Defines voltage characteristics of electricity supplied by public distribution systems and can be complemented by EN 61000-4-30 measurements for compliance verification.EN 61000-2-2 & EN 61000-2-4
These provide electromagnetic environment compatibility recommendations, important to contextualize power quality measurements.EMC Directive 2014/30/EU
Compliance with this directive is supported by adherence to EN 61000-4-30 measurement techniques, facilitating CE marking and market access within the EU.
Keywords: Electromagnetic compatibility, EMC, power quality measurement, EN 61000-4-30, RVC event detection, measurement uncertainty, crest factor, testing techniques, CENELEC, IEC standards, electrical power quality, voltage measurement, EMC testing, power disturbance analysis.
Frequently Asked Questions
SIST EN 61000-4-30:2015/A1:2021 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Amendment 1: Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods". This standard covers: Amendment 1: Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods
Amendment 1: Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods
SIST EN 61000-4-30:2015/A1:2021 is classified under the following ICS (International Classification for Standards) categories: 33.100.01 - Electromagnetic compatibility in general; 33.100.99 - Other aspects related to EMC. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 61000-4-30:2015/A1:2021 has the following relationships with other standards: It is inter standard links to SIST EN 61000-4-30:2015, SIST EN IEC 61000-4-30:2026. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 61000-4-30:2015/A1:2021 is associated with the following European legislation: EU Directives/Regulations: 2014/30/EU. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 61000-4-30:2015/A1:2021 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2021
Elektromagnetna združljivost (EMC) - 4-30. del: Preskusne in merilne tehnike -
Metode merjenja kakovosti napetosti - Dopolnilo A1
Amendment 1: Electromagnetic compatibility (EMC) - Part 4-30: Testing and
measurement techniques - Power quality measurement methods
Partie 4-30: Techniques d'essai et de mesure - Méthodes de mesure de la qualité de
l'alimentation
Ta slovenski standard je istoveten z: EN 61000-4-30:2015/A1:2021
ICS:
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 61000-4-30:2015/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2021
ICS 33.100.99
English Version
Electromagnetic compatibility (EMC) - Part 4-30: Testing and
measurement techniques - Power quality measurement methods
(IEC 61000-4-30:2015/A1:2021)
Compatibilité électromagnétique (CEM) - Partie 4-30: Elektromagnetische Verträglichkeit (EMV) - Teil 4-30: Prüf-
Techniques d'essai et de mesure - Méthodes de mesure de und Messverfahren - Verfahren zur Messung der
la qualité de l'alimentation Spannungsqualität
(IEC 61000-4-30:2015/A1:2021) (IEC 61000-4-30:2015/A1:2021)
This amendment A1 modifies the European Standard EN 61000-4-30:2015; it was approved by CENELEC on 2021-04-08. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61000-4-30:2015/A1:2021 E
European foreword
The text of document 77A/1080/CDV, future IEC 61000-4-30/A1, prepared by SC 77A "EMC - Low
frequency phenomena" of IEC/TC 77 "Electromagnetic compatibility" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN 61000-4-30:2015/A1:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-01-08
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-04-08
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 61000-4-30:2015/A1:2021 was approved by CENELEC as
a European Standard without any modification.
IEC 61000-4-30 ®
Edition 3.0 2021-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
A MENDMENT 1
AM ENDEMENT 1
Electromagne
...
제목: SIST EN 61000-4-30:2015/A1:2021 - 개정 1: 전자기적 호환성(EMC) - 파트 4-30: 테스트 및 측정 기법 - 전력 품질 측정 방법 기사 내용: 이 기사는 전자기적 호환성(EMC) 및 전력 품질 측정 기법과 관련된 SIST EN 61000-4-30:2015 표준의 개정 1에 대해 논의합니다. 이 개정은 표준의 업데이트와 개선 사항을 제공하여 전력 품질에 대한 정확하고 효과적인 테스트 및 측정 기법을 보장합니다. 이 개정은 이전 버전의 표준에서 식별된 문제나 한계를 해결하며, 전자기적 호환성 분야에서의 전력 측정 방법의 전체적인 품질을 향상시키기 위한 목적을 갖고 있습니다.
The article discusses Amendment 1 of the SIST EN 61000-4-30:2015 standard, which is related to electromagnetic compatibility (EMC) and power quality measurement methods. The amendment provides updates and improvements to the standard, ensuring accurate and effective testing and measurement techniques for power quality. This amendment aims to address any issues or limitations identified in the previous version of the standard, enhancing the overall quality of power measurement methods in the field of electromagnetic compatibility.
記事のタイトル：SIST EN 61000-4-30:2015/A1:2021 - 改正1：電磁的な相互運用性（EMC）- 部分4-30：試験および測定技術- 電力品質測定方法 記事の内容：この記事では、電磁的な相互運用性（EMC）および電力品質測定方法に関連するSIST EN 61000-4-30:2015規格の改正1について議論しています。この改正により、電力品質の正確かつ効果的な試験および測定技術が確保されるように、規格が更新および改善されます。この改正は、以前のバージョンの規格で特定された問題や制約を解決し、電磁的な相互運用性の分野における電力測定方法の総合的な品質を向上させることを目指しています。
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...