SIST EN 12274-6:2002
(Main)Slurry surfacing - Test methods - Part 6: Rate of application
Slurry surfacing - Test methods - Part 6: Rate of application
This European Standard specifies test methods for determination the average rate of application of a slurry surfacing in kilograms per square metre (kg/m2).
The European Standard applies to slurry surfacings for roads, airfields and other trafficked areas.
Dünne Asphaltschicht in Kaltbauweise - Prüfverfahren - Teil 6: Bestimmung der Einbaumasse
Diese Europäische Norm legt Prüfverfahren zur Bestimmung der durchschnittlichen Einbaumasse in
Kilogramm je Quadratmeter (kg/m 2 ) für dünne Asphaltschichten in Kaltbauweise fest.
Diese Europäische Norm gilt für dünne Asphaltschichten in Kaltbauweise von Straßen, Flugplätzen und
anderen Verkehrsflächen.
Matériaux bitumineux coulés a froid - Méthodes d'essai - Partie 6: Taux d'épandage
La présente Norme européenne spécifie les méthodes d'essai pour la détermination du taux moyen d'épandage des matériaux bitumineux coulés a froid en kilogramme par metre carré (kg/m2).
La présente Norme européenne s'applique aux matériaux bitumineux coulés a froid pour les routes, terrains d'aviation et autres zones de trafic.
Slurry surfacing - Test methods - Part 6: Rate of application
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Slurry surfacing - Test methods - Part 6: Rate of applicationDünne Asphaltschicht in Kaltbauweise - Prüfverfahren - Teil 6:Bestimmung der EinbaumasseMatériaux bitumineux coulés a froid - Méthodes d'essai - Partie 6: Taux d'épandageSlurry surfacing - Test methods - Part 6: Rate of application93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 12274-6:2002SIST EN 12274-6:2002en01-september-2002SIST EN 12274-6:2002SLOVENSKI
STANDARD
SIST EN 12274-6:2002
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12274-6January 2002ICS 93.080.20English versionSlurry surfacing - Test methods - Part 6: Rate of applicationMatériaux bitumineux coulés à froid - Méthodes d'essai -Partie 6: Taux d'épandageDünne Asphaltschicht in Kaltbauweise - Prüfverfahren - Teil6: Bestimmung der EinbaumasseThis European Standard was approved by CEN on 9 November 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12274-6:2002 ESIST EN 12274-6:2002
EN 12274-6:2002 (E)2ContentspageForeword.31Scope.42Terms and definitions.43Principle.44Procedure.45Expression of results.66Test report.6Bibliography.7SIST EN 12274-6:2002
EN 12274-6:2002 (E)3ForewordThis European Standard has been prepared by Technical Committee CEN/TC 227 "Road materials", thesecretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by July 2002, and conflicting national standards shall be withdrawn at the latest byJune 2004.This European Standard is one of a series of standards as listed below:EN 12274-1, Slurry surfacing
Test methods
Part 1: Sampling for binder extractionEN 12274-2, Slurry surfacing
Test methods
Part 2: Determination of residual binder contentEN 12274-3, Slurry surfacing
Test methods
Part 3: ConsistencyEN 12274-4, Slurry surfacing
Test methods
Part 4: Determination of cohesion of the mixEN 12274-5, Slurry surfacing
Test methods
Part 5: Determination of wearingEN 12274-6, Slurry surfacing
Test methods
Part 6: Rate of applicationEN 12274-7, Slurry surfacing
Test methods
Part 7: Shaking abrasion test in suitability of mineral aggregates toslurry mixes1EN 12274-8, Slurry surfacing
Test methods
Part 8: Visual assessment1According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,Switzerland and the United Kingdom.
1 In preparation.SIST EN 12274-6:2002
EN 12274-6:2002 (E)41 ScopeThis European Standard specifies test methods for determination the average rate of application of a slurrysurfacing in kilograms per square metre (kg/m²).The European Standard applies to slurry surfacings for roads, airfields and other trafficked areas.2 Terms and definitionsFor the purposes of this European Standard, the following term and definition apply.2.1rate of application, Y,mass of slurry surfacing applied on the covered area divided by this area, measured in kilograms per square metre(kg/m²)3 PrincipleThe total mass of slurry surfacing mixture applied
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.