Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders (IEC 60061-2:1969/A55:2020)

Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und Sicherheit - Teil 2: Lampenfassungen (IEC 60061-2:1969/A55:2020)

Amendement 55 - Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et de la sécurité - Partie 2: Douilles (IEC 60061-2:1969/A55:2020)

Vznožki in okovi sijalk skupaj s kalibri za nadzorovanje izmenljivosti in varnosti - 2. del: Okovi sijalk - Dopolnilo A55 (IEC 60061-2:1969/A55:2020)

General Information

Status
Published
Publication Date
28-May-2020
ICS
29.140.10 - Lamp caps and holders
Technical Committee
IESV - Lamps and related equipment
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
27-May-2020
Due Date
01-Aug-2020
Completion Date
29-May-2020
Ref Project
EN 60061-2:1993/A55:2020 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

Relations

Amends
SIST EN 60061-2:1999 - Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 2: Lampholders
Effective Date
12-Jun-2018

Overview

SIST EN 60061-2:1999/A55:2020 is a European Standard developed by CLC (European Committee for Electrotechnical Standardization) that addresses the specifications for lamp caps and holders, specifically focusing on lampholders. This standard forms Part 2 of the broader EN 60061 series, which governs lamp caps and holders alongside the gauges used to control interchangeability and safety. The 2020 amendment (A55) updates and refines requirements to ensure continued relevance and compliance with current safety and compatibility demands.

The standard is aligned with the International Electrotechnical Commission's IEC 60061-2:1969/A55:2020 document, ensuring global consistency in the design and application of lampholders. It covers parameters critical to the interchangeability between lamp holders and caps, aiming to uphold safety, electrical performance, and mechanical reliability.

Key Topics

  • Lampholder Designs and Types
    EN 60061-2 outlines technical details for a wide array of lampholder designs, including bayonet caps, Edison screw bases, prefocus types, and various specialized automotive and tubular lamp holders. Examples include B22d, E26, E39, G10q, and many others, each with corresponding mechanical and electrical characteristics.

  • Interchangeability and Compatibility
    The standard provides precise gauges and measurement methods to control interchangeability among lamp holders and caps. Ensuring interchangeability prevents improper fitting that may cause electrical faults or safety hazards.

  • Safety Requirements
    Safety is a central theme, with detailed specifications to minimize risks such as electric shock, overheating, or mechanical failure during normal operation. The standard mandates design features to meet these safety criteria effectively.

  • Mounting and Assembly Specifications
    Instructions for the mounting of combined pairs of lampholders and the positioning of threaded sections relative to electrical contacts are included to support consistent installation practices.

  • Amendment Integration
    Amendment A55 updates the 1993 version, incorporating technical corrections and additions while maintaining compliance with international IEC standards. This ensures harmonization across national and international frameworks.

Applications

  • Lighting Manufacturing
    Manufacturers of lighting fixtures, bulbs, and associated components use EN 60061-2 to design lampholders that are compliant with European safety and interchangeability regulations.

  • Industrial and Commercial Lighting Installation
    Specifiers and engineers integrate standardized lampholders to ensure compatibility with diverse lamp types, simplifying maintenance and replacement processes in industrial and commercial environments.

  • Automotive Lighting Systems
    The standard includes specific lampholder designs used in automotive applications, promoting reliable electrical connections and safe operations for vehicle lighting.

  • Quality Assurance and Testing
    Testing laboratories and certification bodies employ the gauges and measurement procedures defined in the standard to verify product conformity in terms of mechanical dimensions and electrical safety.

  • Regulatory Compliance
    EN 60061-2 enables regulatory bodies to enforce lamp and holder safety standards, fostering consumer protection and reducing risks associated with electrical lighting products.

Related Standards

  • EN 60061-1: Lamp caps – Part 1
    Focuses on lamp caps complementing the lampholder requirements detailed in Part 2, ensuring coherent interoperability in lighting systems.

  • IEC 60061 Series
    The comprehensive international series governing lamp caps, holders, and gauges aiming for global standardization.

  • Safety Standards for Electrical Equipment
    Other related standards such as EN 60598 for luminaire safety and IEC 60364 for electrical installations uphold the overarching safety framework regarding lighting components.

  • National Standards
    CENELEC members implement SIST EN 60061-2:1999/A55:2020 as national standards without alteration, facilitating uniform compliance across participating European countries.

Keywords: SIST EN 60061-2:1999/A55:2020, lampholders, lamp caps, interchangeability, lighting safety, CLC standards, lamp holder gauges, bayonet lampholders, Edison screw holders, lighting industry standards, IEC 60061-2, European lighting standards, lamp holder design, electrical safety in lighting.

SIST EN 60061-2:1999/A55:2020 - BARVE - Page 1 previewSIST EN 60061-2:1999/A55:2020 - BARVE - Page 2 previewSIST EN 60061-2:1999/A55:2020 - BARVE - Page 3 previewSIST EN 60061-2:1999/A55:2020 - BARVE - Page 4 preview
PreviousNext
Amendment

SIST EN 60061-2:1999/A55:2020 - BARVE

English and French language
22 pages
Preview
Preview
e-Library read for
1 day

Frequently Asked Questions

SIST EN 60061-2:1999/A55:2020 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders (IEC 60061-2:1969/A55:2020)". This standard covers: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders (IEC 60061-2:1969/A55:2020)

Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders (IEC 60061-2:1969/A55:2020)

SIST EN 60061-2:1999/A55:2020 is classified under the following ICS (International Classification for Standards) categories: 29.140.10 - Lamp caps and holders. The ICS classification helps identify the subject area and facilitates finding related standards.

SIST EN 60061-2:1999/A55:2020 has the following relationships with other standards: It is inter standard links to SIST EN 60061-2:1999. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

You can purchase SIST EN 60061-2:1999/A55:2020 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2020
Vznožki in okovi sijalk skupaj s kalibri za nadzorovanje izmenljivosti in varnosti -
2. del: Okovi sijalk - Dopolnilo A55 (IEC 60061-2:1969/A55:2020)
Lamp caps and holders together with gauges for the control of interchangeability and
safety - Part 2: Lampholders (IEC 60061-2:1969/A55:2020)
Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und
Sicherheit - Teil 2: Lampenfassungen (IEC 60061-2:1969/A55:2020)
Amendement 55 - Culots de lampes et douilles ainsi que calibres pour le contrôle de
l'interchangeabilité et de la sécurité - Partie 2: Douilles (IEC 60061-2:1969/A55:2020)
Ta slovenski standard je istoveten z: EN 60061-2:1993/A55:2020
ICS:
29.140.10 Grla in držala žarnic Lamp caps and holders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60061-2:1993/A55

NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2020
ICS 29.140.10
English Version
Lamp caps and holders together with gauges for the control of
interchangeability and safety - Part 2: Lampholders
(IEC 60061-2:1969/A55:2020)
Culots de lampes et douilles ainsi que calibres pour le Lampensockel und -fassungen sowie Lehren zur Kontrolle
contrôle de l'interchangeabilité et de la sécurité - Partie 2: der Austauschbarkeit und Sicherheit - Teil 2:
Douilles Lampenfassungen
(IEC 60061-2:1969/A55:2020) (IEC 60061-2:1969/A55:2020)
This amendment A55 modifies the European Standard EN 60061-2:1993; it was approved by CENELEC on 2020-05-05. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60061-2:1993/A55:2020 E

European foreword
The text of document 34B/2074/FDIS, future IEC 60061-2/A55, prepared by SC 34B "Lamp caps and
holders" of IEC/TC 34 "Lighting" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 60061-2:1993/A55:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-02-05
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-05-05
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 60061-2:1969/A55:2020 was approved by CENELEC as a
European Standard without any modification.

NORME IEC
INTERNATIONALE
INTERNATIONAL 60061-2
STANDARD
AMENDEMENT 55
AMENDMENT 55
2020-03
Amendement 55
Culots de lampes et douilles ainsi que calibres

pour le contrôle de l'interchangeabilité
et de la sécurité –
Partie 2:
Douilles
Amendment 55
Lamp caps and holders together with
gauges for the control of interchangeability
and safety –
Part 2:
Lampholders
Les feuilles de cet amendement sont à insérer dans
l'IEC 60061-2 (1969)
The sheets contained in this amendment are to be inserted
in IEC 60061-2 (1969)
 IEC 2020 Droits de reproduction réservés  Copyright - all rights reserved

International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch

NORME IEC
INTERNATIONALE
INTERNATIONAL 60061-2
Edition 3.55
STANDARD
2020-03
Modifiée selon les compléments/amended in accordance with supplements:

A(1970), B(1971), C(1972), D(1975), E(1977),

F(1980), G(1983), H(1987), J(1989), K(1992), L(1994),

M(1994), N(1995), P(1996), Q(1996), R(1996), S(1997)

et les amendements/and amendments 18(1998), 19(1999), 20(1999), 21(2000),

22(2001), 23(2001), 24(2001), 25(2002), 26(2002), 27(2002), 28(2003), 29(2003),

30(2003), 31(2004), 32(2004), 33(2005), 34(2006) 35(2007), 36(2007), 37(2008),

38(2009), 39(2009), 40(2010), 41(2010), 42(2010), 43(2011), 44(2011), 45(2012),

46(2013), 47(2013), 48(2014), 49(2015), 50(2015), 51(2016), 52(2017),

53(2017), 54(2018) et/and 55(2020)

Culots de lampes et douilles ainsi que calibres
pour le contrôle de l'interchangeabilité
et de la sécurité –
Partie 2:
Douilles
Lamp caps and holders together with
gauges for the control of interchangeability
and safety –
Part 2:
Lampholders
 IEC 2020 Droits de reproduction réservés  Copyright - all rights reserved

Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch

IEC 60061-2:1969/AMD55:2020  IEC 2020

SOMMAIRE CONTENTS
DOUILLES - SOMMAIRE PAR DÉSIGNATION LAMPHOLDERS - CONTENTS BY DESIGNATION

Feuilles Sheet
Douilles PX26, PY26d-1 … PY26d-7 . 7005-5-4 Lampholders PX26, , PY26d-1 … PY26d-7 . 7005-5-4
Douille E11 . 7005-6-1 Lampholder E11 . 7005-6-1
Douille EY10 . 7005-7-1 Lampholder EY10 . 7005-7-1
Douilles pour culots à baïonnette BAX9s . 7005-8-1 Lampholders for bayonet caps BAX9s . 7005-8-1
Douilles pour culots à baïonnette BAY9s . 7005-9-1 Lampholders for bayonet caps BAY9s . 7005-9-1
Douilles à baïonnette B22d . 7005-10-8 Bayonet lampholders B22d . 7005-10-8
Douilles à baïonnette B22d-3(90°/135°) . 7005-10A-4 Bayonet lampholders B22d-3(90°/135°) . 7005-10A-4
Douilles pour culots à baïonnette Lampholders for bayonet automobile
pour automobiles BA7 . 7005-11-3 caps BA7 . 7005-11-3
Douilles pour culots à baïonnette Lampholders for bayonet automobile
pour automobiles BA9 . 7005-12-2 caps BA9 . 7005-12-2
Douilles BA15d, BA15s, Lampholders BA15d, BA15s,
BA15d-3(110°), BA15s-3(110°), BA15d-3(110°), BA15s-3(110°),
BAU15d, BAU15s, BAU15d, BAU15s,
BAU15d-3(110°), BAU15s-3(110°), BAU15d-3(110°), BAU15s-3(110°),
BAW15d, BAW15s, BAW15d, BAW15s,
BAW15d-3(110°), BAW15s-3(110°), BAW15d-3(110°), BAW15s-3(110°),
BAY15d, BAY15s, BAY15d, BAY15s,
BAY15d-3(100°), BAY15s-3(110°) BAY15d-3(100°), BAY15s-3(110°)
BAZ15d, BAZ15s, BAZ15d, BAZ15s,
BAZ15d-3(110°) & BAZ15d-3(110°) 7005-13-6 BAZ15d-3(110°) & BAZ15d-3(110°) 7005-13-6
Douilles pour culots à baïonnette Lampholders for bayonet automobile
pour automobiles BA20 . 7005-14-2 caps BA20 . 7005-14-2
Douilles pour culots à baïonnette BA21-3 . 7005-15-2 Lampholders for bayonet caps BA21-3 . 7005-15-2
Douilles à baïonnette B15d . 7005-16-4 Bayonet lampholders B15d . 7005-16-4
Douilles à baïonnette BY22d . 7005-17-5 Bayonet lampholders BY22d . 7005-17-5
Position de la chemise filetée de la douille Edison
par rapport au contact central. 7005-20-6
Position of holder thread in relation to central
Douilles E26 . 7005-21A-1 contact of the Edison lampholder . 7005-20-6
Douilles E39 . 7005-24A-3 Lampholders E26 . 7005-21A-1
Douille E12 . 7005-28-1 Lampholders E39 . 7005-24A-3
Position de la chemise filetée par rapport aux Lampholder E12 . 7005-28-1
contacts central et intermédiaire de la douille E26d . 7005-29-2
Position of holder thread in relation to the central
Douille préfocus EP10 . 7005-30-1 and intermediate contacts of the lampholder E26d . 7005-29-2
Douilles P20, PX20, PY20 & PZ20 . 7005-31-2 Prefocus lampholder EP10 . 7005-30-1
Douilles P22 & PX22 . 7005-32-2 Lampholders P20, PX20, PY20 & PZ20 . 7005-31-2
Douilles 2G13 . 7005-33-1 Lampholders P22 & PX22 . 7005-32-2
Douille PX43t . 7005-34-1 Lampholders 2G13 . 7005-33-1
Douille PX13.5s . 7005-35-1 Lampholder PX43t . 7005-34-1
Douille P26s . 7005-36-1 Lampholder PX13.5s . 7005-35-1
Douille PKX22s . 7005-37-1 Lampholder P26s . 7005-36-1
Douilles P43t . 7005-39-4 Lampholder PKX22s . 7005-37-1
Douilles préfocus P28s . 7005-42-6 Lampholders P43t. 7005-39-4
Douille préfocus P40 . 7005-43-3 Prefocus lampholders P28s . 7005-42-6
Douille de précision P30s pour culot Prefocus lampholder P40 . 7005-43-3
préfocus P30s-10.3 . 7005-44-2
Precision holder P30s for prefocus
Douilles G17q, GX17q & GY17q . 7005-45-2 cap P30s-10.3 . 7005-44-2
Douille pour automobiles P14.5s . 7005-46-3 Lampholders G17q, GX17q & GY17q . 7005-45-2
Douille PK22s . 7005-47-2 Lampholder for automobile lamps P14.5s . 7005-46-3
Distance de montage pour ensemble de Lampholder PK22s . 7005-47-2
deux douilles non flexibles G13 . 7005-50-4
Mounting of combined pair of inflexible
Distance de montage pour ensemble de
lampholders G13 . 7005-50-4
deux douilles non flexibles G5 . 7005-51-4
Mounting distance of a combined pair of inflexible
Distance de montage pour ensemble de deux lampholders G5 . 7005-51-4
douilles GX5 . 7005-51A-1 Mounting distance of a combined pair of lampholders
Combinaisons de deux douilles R7s & RX7s . 7005-53-4 GX5 . 7005-51A-1
Douilles R7s & RX7s . 7005-53A-5 Combined pairs of lampholders R7s & RX7s . 7005-53-4
Douille Fa6 . 7005-55-3 Lampholders R7s & RX7s . 7005-53A-5
Lampholder Fa6 . 7005-55-3

IEC 60061-2:1969/AMD55:2020  IEC 2020

Feuilles Sheet
Douille G10q. 7005-56-2 Lampholder G10q . 7005-56-2
Douille pour culot à deux contacts Lampholder for recessed double-contact
en retrait R17d . 7005-57-1 cap R17d . 7005-57-1
Douilles et connecteurs Fa8 . 7005-58-1 Lampholders and connectors Fa8. 7005-58-1
Douilles G6.35, GX6.35 & GY6.35 . 7005-59-2 Lampholders G6.35, GX6.35 & GY6.35 . 7005-59-2
Connecteur GZ6.35 . 7005-59A-3 Connector GZ6.35 . 7005-59A-3
Douille G12. 7005-63-3 Lampholder G12 . 7005-63-3
Douilles PG12 & PGX12 . 7005-64-4 Lampholders PG12 & PGX12 . 7005-64-4
Douille GX38q . 7005-65-1 Lampholder GX38q . 7005-65-1
Douille P29 . 7005-66-1 Lampholder P29 . 7005-66-1
Connecteur pour socle de lampe à deux broches GZ4 7005-67-1 Connector for bi-pin lamp base GZ4. 7005-67-1
Douille GR8 . 7005-68-4 Lampholder GR8 . 7005-68-4
Douille G23. 7005-69-1 Lampholder G23 . 7005-69-1
Douille G9.5. 7005-70-2 Lampholder G9.5 . 7005-70-2
Douille GX9.5 . 7005-70A-3 Lampholder GX9.5 . 7005-70A-3
Douilles GY9.5, GZ9.5, GZX9.5, GZY9.5 Lampholders GY9.5, GZ9.5, GZX9.5, GZY9.5
& GZZ9.5 . 7005-70B-2 & GZZ9.5 . 7005-70B-2
Douille G4 . 7005-72-2 Lampholder G4 . 7005-72-2
Douilles G5.3 . 7005-73-1 Lampholders G5.3 . 7005-73-1
Douilles GX5.3 . 7005-73A-5 Lampholders GX5.3 . 7005-73A-5
Douilles GY5.3 . 7005-73B-5 Lampholders GY5.3 . 7005-73B-5
Douille G22. 7005-75-4 Lampholder G22 . 7005-75-4
Douilles G38 . 7005-76-2 Lampholders G38 . 7005-76-2
Douille GR10q . 7005-77-3 Lampholder GR10q . 7005-77-3
Douilles G24, GX24 & GY24 . 7005-78-7 Lampholders G24, GX24 & GY24 . 7005-78-7
Douille P11.5d . 7005-79-1 Lampholder P11.5d. 7005-79-1
Principes pour la construction des douilles Principles for design of lampholders
SV7, SV8.5 & SVX8.5 . 7005-80-4 SV7, SV8.5 & SVX8.5 . 7005-80-4
Douilles 2G11 . 7005-82-3 Lampholders 2G11 . 7005-82-3
Douilles 2GX11 . 7005-82A-1 Lampholders 2GX11 . 7005-82A-1
Distance de montage pour ensemble de deux Mounting of a combined pair of lampholders
douilles pour lampes tubulaires à rayonnement for tubular infra-red lamps with
infrarouge munies des culots SK15s . 7005-83-1 caps SK15s . 7005-83-1
Douilles GX10q . 7005-84-2 Lampholders GX10q . 7005-84-2
Douilles GY10q . 7005-85-2 Lampholders GY10q . 7005-85-2
Douille GX23 . 7005-86-1 Lampholder GX23 . 7005-86-1
Douilles G32, GX32 & GY32 . 7005-87-3 Lampholders G32, GX32 & GY32 . 7005-87-3
Douille PY43d . 7005-88-1 Lampholder PY43d . 7005-88-1
Douille PZ43t . 7005-89-1 Lampholder PZ43t . 7005-89-1
Douille pour lampes flash W10.6x8.5d . 7005-90-2 Lampholder for photo-flash lamps W10.6x8.5d . 7005-90-2
Douilles (rigides) W2.1x9.5d & WX2.1 x 9.5d . 7005-91-2 Lampholders (rigid) W2.1x9.5d & WX2.1 x 9.5d . 7005-91-2
Douille (rigide) W2x4.6d . 7005-94-2 Lampholder (rigid) W2x4.6d . 7005-94-2
Douille P45t . 7005-95-2 Lampholder P45t . 7005-95-2
Douilles SX4s . 7005-97-1 Holders SX4s . 7005-97-1
Douille pour lampes pour automobiles X511 . 7005-99-2 Lampholder for automobile lamps X511 . 7005-99-2
Douilles GRX10q. . 7005-101-1 Lampholders GRX10q. . 7005-101-1
Douille 2G7. 7005-102-1 Lampholder 2G7 . 7005-102-1
Douille 2GX7 . 7005-103-1 Lampholder 2GX7 . 7005-103-1
Douilles W2.5x16 . 7005-104-1 Lampholders W2.5x16. 7005-104-1
Douilles WX2.5x16 . 7005-104A-1 Lampholders WX2.5x16 . 7005-104A-1
Douilles WY2.5x16 . 7005-104B-1 Lampholders WY2.5x16 . 7005-104B-1
Douilles WZ2.5x16 . 7005-104C-1 Lampholders WZ2.5x16 . 7005-104C-1
Douilles WU2.5x16 . 7005-104D-1 Lampholders WU2.5x16 . 7005-104D-1
Douilles W3x16d & WX3x16d . 7005-105-2 Lampholders W3x16d & WX3x16d . 7005-105-2
Douilles W3x16q, WX3x16q & WY3x16q . 7005-106-3 Lampholders W3x16q, WX3x16q & WY3x16q . 7005-106-3
Connecteurs et orifices de montage PG13 & PGJ13 7005-107-2 Connectors and mounting holes PG13 & PGJ13. 7005-107-2
Douille GU4 . 7005-108-2 Lampholder GU4 . 7005-108-2
Douille GU5.3 . 7005-109-2 Lampholder GU5.3 . 7005-109-2
Douilles et connecteurs PGJ19 . 7005-110-3 Holders and connectors PGJ19 . 7005-110-3

IEC 60061-2:1969/AMD55:2020  IEC 2020

Feuilles Sheet
Douilles P32 & PK32 . 7005-111-5 Lampholders P32 & PK32 . 7005-111-5
Douilles S14 . 7005-112-1 Lampholders S14 . 7005-112-1
Douille GU7 . 7005-113-2 Lampholder GU7 . 7005-113-2
Douille Fc 2 . 7005-114-1 Lampholder Fc 2 . 7005-114-1
Douille W4.3x8.5d . 7005-115-1 Lampholder W4.3x8.5d . 7005-115-1
Douille EZ10 . 7005-116-1 Lampholder EZ10. 7005-116-1
Douilles 2G10 . 7005-118-1 Lampholders 2G10 . 7005-118-1
Douille GY22 . 7005-119-1 Lampholder GY22 . 7005-119-1
Douille GZ10 . 7005-120-2 Lampholder GZ10 . 7005-120-2
Douille GU10 . 7005-121-2 Lampholder GU10 . 7005-121-2
Douille G8.5 . 7005-122-2 Lampholder G8.5. 7005-122-2
Douille GU10q . 7005-123-1 Lampholder GU10q . 7005-123-1
Douille GZ10q . 7005-124-1 Lampholder GZ10q . 7005-124-1
Douille 2GX13 . 7005-125-2 Lampholder 2GX13 . 7005-125-2
Connecteur G5.3-4.8 . 7005-126-1 Connector G5.3-4.8 . 7005-126-1
Douilles et connecteurs PG20 & PGU20 . 7005-127-2 Lampholders and connectors PG20 & PGU20 . 7005-127-2
Douilles P(X)(Y)26.4t & PJ26.4t. 7005-128-3 Lampholders P(X)(Y)26.4t & PJ26.4t . 7005-128-3
Douille G9 . 7005-129-2 Lampholder G9 . 7005-129-2
Douille GRZ10d . 7005-131-1 Lampholder GRZ10d. 7005-131-1
Douille GRZ10t . 7005-132-1 Lampholder GRZ10t . 7005-132-1
Douilles P38t . 7005-133-1 Lampholders P38t. 7005-133-1
Douille GX12 . 7005-135-1 Lampholder GX12 . 7005-135-1
Connecteurs pour circuit imprimé GZX7d, GZY7d Printed circuit connectors GZX7d, GZY7d
& GZZ7d . 7005-136-1 & GZZ7d . 7005-136-1
Connecteurs pour circuit imprimé GUX2.5d, Printed circuit connectors GUX2.5d,
GUY2.5d & GGUZ2.5d . 7005-137-1 GUY2.5d & GGUZ2.5d . 7005-137-1
Douille P23t. 7005-138-1 Holder P23t . 7005-138-1
Douille PX23t . 7005-138A-1 Holder PX23t. 7005-138A-1
Douilles G7.9 & GX7.9 . 7005-139-1 Lampholders G7.9 & GX7.9 . 7005-139-1
Douilles B8.4d & BX8.4d . 7005-140-1 Holders B8.4d & BX8.4d . 7005-140-1
Douilles 2G8 . 7005-141-2 Lampholders 2G8 . 7005-141-2
Douilles GX53 . 7005-142-2 Holders GX53 . 7005-142-2
Connecteur/Douille GX8.5 . 7005-143-1 Connector/Holder GX8.5. 7005-143-1
Douille GX10 . 7005-144-3 Lampholder GX10 . 7005-144-3
Douilles PGJY19 . 7005-146-2 Holders PGJY19 . 7005-146-2
Douilles et connecteurs PG18.5d . 7005-147-1 Lampholders and connectors PG18.5d . 7005-147-1
Douilles PGZ12 . 7005-148-2 Lampholders PGZ12 . 7005-148-2
Douilles BAW9s . 7005-149-1 Holders BAW9s . 7005-149-1
Douilles BAZ9s . 7005-150-1 Holders BAZ9s . 7005-150-1
Douilles BAU9s . 7005-150A-1 Holders BAU9s . 7005-150A-1
Douilles BAUZ9s . 7005-150B-1 Holders BAUZ9s . 7005-150B-1
Douille WZ3x16q . 7005-151-1 Lampholder WZ3x16q . 7005-151-1
Douille GU6.5 . 7005-152-1 Lampholder GU6.5 . 7005-152-1
Douille PGJ5 . 7005-153-1 Lampholder PGJ5 . 7005-153-1
Connecteur GU16d/GX16d . 7005-154-2 Connector GU16d/GX16d . 7005-154-2
Douilles PGJ23t . 7005-155-1 Holders PGJ23t . 7005-155-1
Douilles PGJ(X)50 . 7005-156-1 Holders PGJ(X)50 . 7005-156-1
Douilles GR14q . 7005-157-1 Holders GR14q . 7005-157-1
Douilles et connecteurs PU20 . 7005-158-1 Holders and connectors PU20d. 7005-158-1
Douilles G28d . 7005-161-1 Holders G28d . 7005-161-1
Douilles CH14.65d . 7005-162-1 Printed circuit connectors CH14.65d . 7005-162-1
Douilles PGZ(X)18 . 7005-163-2 Lampholders PGZ(X)18 . 7005-163-2
Douilles WP3.3x14.5 . 7005-164-3 Holders WP3.3x14.5 . 7005-164-3
Douilles PGJ21t . 7005-165-1 Holders PGJ21t . 7005-165-1
Douilles GU8.5 . 7005-166-1 Holders GU8.5 . 7005-166-1
Douilles PGJX28 .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...