SIST EN 2067:2001
(Main)Aerospace series - Rod ends with self-aligning ball bearings - Technical specification
Aerospace series - Rod ends with self-aligning ball bearings - Technical specification
This standard specifies the required characteristics, inspection and test methods, qualification and acceptance conditions for rod ends with self-aligning ball bearings designed to withstand (under load) slight swivelling and slow rotations only. It is applicable whenever referenced.
Luft- und Raumfahrt - Ösenköpfe mit Pendelkugellager - Technische Lieferbedingungen
Diese Norm legt die Anforderungen, Prüfverfahren, Qualifikations- und Annahmebedingungen für Ösenköpfe mit Pendelkugellager fest, die so ausgelegt sind, daß sie (unter Belastung) nur langsamer Drehbewegungen und geringen Kippbewegungen standhalten. Sie ist anzuwenden, wenn auf sie Bezug genommen wird.
Série aérospatiale - Embouts a rotule sur billes - Spécification technique
La présente norme spécifie les caractéristiques requises, les méthodes de contrôle et d'essai, les conditions de qualification et de réception des embouts à rotule sur billes conçus pour supporter (en charge) uniquement des rotations lentes et des rotulages faibles. Elle s'applique chaque fois qu'elle est citée en référence.
Aerospace series - Rod ends with self-aligning ball bearings - Technical specification
General Information
- Status
- Published
- Publication Date
- 31-Dec-2000
- Technical Committee
- SS SPL - Technical Board for the general field
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Jan-2001
- Due Date
- 01-Jan-2001
- Completion Date
- 01-Jan-2001
Relations
- Effective Date
- 22-Dec-2008
Overview
EN 2067:1996 - Aerospace series - Rod ends with self-aligning ball bearings - Technical specification (adopted as SIST EN 2067:2001) is a CEN aerospace standard that defines the required characteristics, inspection and test methods, and the qualification and acceptance conditions for rod ends fitted with self‑aligning ball bearings. The standard applies to components intended to withstand slight swivelling and slow rotations under load and is to be used wherever it is referenced in procurement, design or certification documentation.
Key topics and requirements
The standard focuses on practical and safety‑critical aspects of rod ends with self‑aligning ball bearings. Core technical topics include:
- Required characteristics - the functional and dimensional attributes necessary for aerospace use (performance, geometric form, marking and traceability).
- Inspection and test methods - procedures to verify conformity (visual inspection, dimensional checks and functional tests) as specified by the standard.
- Qualification conditions - criteria and testing sequences required to qualify a design or production process for aerospace applications.
- Acceptance conditions - sampling, acceptance criteria and documentation needed to release parts to service.
- Scope limitation - intended specifically for rod ends that permit only slight swivelling and slow rotation under load (not for bearings intended for continuous or high-speed rotation).
Keywords integrated naturally: EN 2067, rod ends, self-aligning ball bearings, aerospace standard, inspection and test methods.
Applications
EN 2067 is applicable across the aerospace supply chain wherever rod-end bearings are specified for mechanical linkages that experience limited angular movement:
- Aerospace component manufacturers producing rod ends with self‑aligning ball bearings
- Design engineers specifying bearing end‑links in airframe and systems assemblies
- Quality and inspection teams applying acceptance and test criteria during incoming inspection and production control
- Procurement and suppliers using the standard to ensure part compliance and traceability
- Certification and maintenance organizations referencing qualification and acceptance evidence
Using EN 2067 helps ensure consistent safety, interchangeability and traceability of rod end components in aerospace applications.
Related standards
- Issued by CEN and listed under ICS 49.035 (Components for aerospace construction).
- Adopted nationally (e.g., SIST EN 2067:2001).
Where EN 2067 is referenced in design specifications or procurement documents, it sets the mandatory technical and inspection requirements for rod ends with self‑aligning ball bearings.
Frequently Asked Questions
SIST EN 2067:2001 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aerospace series - Rod ends with self-aligning ball bearings - Technical specification". This standard covers: This standard specifies the required characteristics, inspection and test methods, qualification and acceptance conditions for rod ends with self-aligning ball bearings designed to withstand (under load) slight swivelling and slow rotations only. It is applicable whenever referenced.
This standard specifies the required characteristics, inspection and test methods, qualification and acceptance conditions for rod ends with self-aligning ball bearings designed to withstand (under load) slight swivelling and slow rotations only. It is applicable whenever referenced.
SIST EN 2067:2001 is classified under the following ICS (International Classification for Standards) categories: 49.035 - Components for aerospace construction. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 2067:2001 has the following relationships with other standards: It is inter standard links to SIST EN 2067:2001/AC:2001. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 2067:2001 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Rod ends with self-aligning ball bearings - Technical specificationLuft- und Raumfahrt - Ösenköpfe mit Pendelkugellager - Technische LieferbedingungenSérie aérospatiale - Embouts a rotule sur billes - Spécification techniqueAerospace series - Rod ends with self-aligning ball bearings - Technical specification49.035Sestavni deli za letalsko in vesoljsko gradnjoComponents for aerospace construct
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...