Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2 - Normal clearance category - Dimensions and loads

This standard specifies the characteristics of rigid single row ball bearings in corrosion resisting steel of diameter series 0 and 2 designed to withstand only slow rotations and oscillations under load. They are intended for use between fixed and moving parts of the aircraft structure and their control mechanisms. The airframe rolling bearings defined in this standard are used from -54°C to 150°C.

Luft- und Raumfahrt - Flugwerklager - Einreihige Rillenkugellager aus korrosionsbeständigem Stahl - Durchmesserreihen 0 und 2 - Normale Lagerluft - Maße und Belastungen

Diese Norm legt die Eigenschaften von einreihigen Rillenkugellagern aus korrosionsbeständigem Stahl der Durchmesserreihen 0 und 2 fest, die so ausgelegt sind, dass sie unter Belastung nur langsamen Dreh- und Schwenk- bewegungen standhalten. Sie sind zur Verwendung zwischen starren und beweglichen Flugwerkteilen und deren Steuerungseinrichtungen vorgesehen. Die in der vorliegenden Norm festgelegten Flugwerklager sind in dem Temperatur- bereich von -54°C bis +150°C anwendbar.

Série aérospatiale - Roulements pour structures d'aéronefs - Roulements en acier, résistant a la corrosion, rigides, a une rangée de billes - Séries de diametres 0 et 2 - Catégorie a jeux normaux - Dimensions et charges

La présente norme spécifie les caractéristiques des roulements en acier résistant à la corrosion, rigides, à une rangée de billes, séries de diamètres 0 et 2 conçus pour supporter en charge uniquement des rotations lentes   et des oscillations faibles. Ils sont destinés à être utilisés entre les éléments fixes et mobiles de la structure des aéronefs et de leurs mécanismes de commande. Les roulements de structure définis par la présente norme sont utilisables dans l'intervalle de température de -54°C à +150°C.

Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2 - Normal clearance category - Dimensions and loads

General Information

Status
Published
Publication Date
31-Dec-2000
ICS
49.035 - Components for aerospace construction
Technical Committee
SS SPL - Technical Board for the general field
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jan-2001
Due Date
01-Jan-2001
Completion Date
01-Jan-2001
Ref Project
EN 3286:1994 - Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2 - Normal clearance category - Dimensions and loads

Overview

EN 3286:1994 (Aerospace series) is a CEN standard that defines the characteristics, dimensions and load data for rigid single row ball bearings made of corrosion resisting steel for airframe rolling applications. It covers diameter series 0 and 2, normal clearance category, and bearings intended for slow rotations and oscillations in aircraft structures and control mechanisms. Operating temperature range is specified from -54°C to 150°C.

Key topics and requirements

  • Bearing type and material: Rigid single row ball bearings in corrosion resisting steel suitable for airframe use.
  • Diameter series: Applies to series 0 and 2 - dimensional families used for consistent interchangeability.
  • Clearance category: Normal clearance - tolerance class to ensure predictable fit and movement in assemblies.
  • Intended kinematics: Designed for slow rotations and oscillations, not for high-speed applications.
  • Dimensions and loads: Specifies the geometric dimensions and load-related characteristics (static and service loads) relevant to airframe rolling bearings.
  • Environmental range: Qualified for service temperatures from -54°C to 150°C, reflecting typical aerospace environmental extremes.
  • Applications scope: Bearings are intended for installation between fixed and moving airframe parts and control mechanisms.

Practical applications

  • Use EN 3286 bearings for landing gear components, control surface linkages, hinges, and other structural pivot points that require corrosion-resistant rolling elements and operate at low speed or oscillatory motion.
  • Useful in new aircraft design, refurbishment, and component standardization to ensure interchangeability and predictable performance.
  • Supports maintenance and procurement decisions by providing standardized dimension and load information for selecting compliant airframe rolling bearings.

Who should use this standard

  • Aerospace engineers and designers specifying bearing choices for airframes.
  • Procurement and supply chain professionals sourcing airframe bearings and components.
  • Bearing manufacturers and quality managers producing corrosion-resisting steel bearings to aerospace requirements.
  • Maintenance, repair and overhaul (MRO) organizations verifying part conformity and replacement compatibility.
  • Certification and regulatory bodies assessing compliance with aerospace component standards.

Related standards

  • Complementary aerospace bearing standards and general bearing dimension/load standards (refer to other Aerospace series and applicable ISO bearing standards) for high-speed or alternate material bearings, tolerances, and testing methods.

Keywords: EN 3286, airframe rolling bearings, rigid single row ball bearings, corrosion resisting steel, diameter series 0 and 2, normal clearance, aerospace standard, dimensions and loads, -54°C to 150°C.

Frequently Asked Questions

SIST EN 3286:2001 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2 - Normal clearance category - Dimensions and loads". This standard covers: This standard specifies the characteristics of rigid single row ball bearings in corrosion resisting steel of diameter series 0 and 2 designed to withstand only slow rotations and oscillations under load. They are intended for use between fixed and moving parts of the aircraft structure and their control mechanisms. The airframe rolling bearings defined in this standard are used from -54°C to 150°C.

This standard specifies the characteristics of rigid single row ball bearings in corrosion resisting steel of diameter series 0 and 2 designed to withstand only slow rotations and oscillations under load. They are intended for use between fixed and moving parts of the aircraft structure and their control mechanisms. The airframe rolling bearings defined in this standard are used from -54°C to 150°C.

SIST EN 3286:2001 is classified under the following ICS (International Classification for Standards) categories: 49.035 - Components for aerospace construction. The ICS classification helps identify the subject area and facilitates finding related standards.

SIST EN 3286:2001 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2001
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in
corrosion resisting steel - Diameter series 0 and 2 - Normal clearance category -
Dimensions and loads
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion
resisting steel - Diameter series 0 and 2 - Normal clearance category - Dimensions and
loads
Luft- und Raumfahrt - Flugwerklager - Einreihige Rillenkugellager aus
korrosionsbeständigem Stahl - Durchmesserreihen 0 und 2 - Normale Lagerluft - Maße
und Belastungen
Série aérospatiale - Roulements pour structures d'aéronefs - Roulements en acier,
résistant a la corrosion, rigides, a une rangée de billes - Séries de diametres 0 et 2 -
Catégorie a jeux normaux - Dimensions et charges
Ta slovenski standard je istov
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...