Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety

This European Standard specifies safety requirements and their verification for design and construction of pedestrian controlled motor mowers with rotary or reciprocating cutting blades used in agricultural, forestry and landscaping to cut and/or mulch grass or similar plants or scrub and woody vegetation. For the purposes of this standard the following types of pedestrian controlled machines are considered to be motor mowers:
-   flail mowers;
-   grassland mowers;
-   scrub clearing machines;
-   sickle bar mowers.
This standard applies also to multipurpose machines when are used for cutting or mulching grass or scrub.
This standard does not cover lawn mowers (see EN 836), engine driven brush cutters and grass trimmers (see EN ISO 11806) or other lawn maintenance equipment.
This standard describes methods for the elimination or reduction of hazards arising from the use of motor mowers. Additionally, it specifies the type of information to be provided by the manufacturer on safe working practices.
Environmental aspects have not been considered in this standard.
This standard applies primarily to machines which are manufactured after the date of issue of the standard.

Land- und forstwirtschaftliche Maschinen - Handgeführte Motormäher - Sicherheit

Diese Europäische Norm enthält sicherheitstechnische Anforderungen und deren Überprüfung für Gestaltung und Konstruktion von handgeführten Motormähern mit rotierenden oder alternierenden Schneidwerkzeugen, die in der Land- und Forstwirtschaft und der Landschaftspflege zum Schneiden und/oder Mulchen von Gras oder ähnlichen Pflanzen oder Gestrüpp und holzartigem Bewuchs eingesetzt werden.
Im Sinne dieser Norm werden die folgenden Arten von handgeführten Maschinen als Motormäher betrachtet:
   Schlegelmäher;
   Aufwuchsmäher;
   Gestrüppmäher;
   Balkenmäher.
Diese Norm gilt ebenso für Mehrzweckgeräte, wenn sie zum Schneiden oder Mulchen von Gras oder Gestrüpp verwendet werden.
ANMERKUNG   Werden diese für andere Tätigkeiten eingesetzt (z. B. Bodenbearbeitung), können andere Normen gelten.
Diese Norm gilt nicht für Rasenmäher (siehe EN ISO 5395-1, EN ISO 5395-2), motorbetriebene Freischneider und Trimmer (siehe EN ISO 11806) oder andere Rasenpflegegeräte.
Dieses Dokument behandelt signifikante Gefährdungen, Gefährdungssituationen und -ereignisse, wie in Anhang A aufgeführt, von handgeführten Motormähern, wenn sie bestimmungsgemäß und unter dem vom Hersteller vorhersehbaren Bedingungen der Fehlanwendung während des normalen Betriebes und der Wartung verwendet werden. Zusätzlich legt sie fest, welche Informationen über sicheres Arbeiten vom Hersteller zur Verfügung zu stellen sind.
Umweltaspekte (außer Lärm) sind in dieser Norm nicht in Betracht gezogen.
Dieses Dokument gilt nicht für Motormäher, die vor dem Datum der Veröffentlichung dieser Norm hergestellt wurden.

Matériel agricole et forestier - Motofaucheuses à conducteur à pied - Sécurité

La présente Norme européenne détermine les prescriptions de sécurité et les vérifications pour la conception et la construction des motofaucheuses à conducteur à pied munies de lames de coupe à mouvement alternatif ou rotatif, utilisées en agriculture, en foresterie ou en horticulture, pour couper et/ou broyer de l'herbe ou des plantes similaires ou des broussailles et de la végétation ligneuse. Pour les besoins de la présente norme, les types suivants de machines à conducteur à pied sont considérés comme étant des motofaucheuses :
-   tondeuses à fléau ;
-   faucheuses-broyeuses à conducteur à pied ;
-   débroussailleuses à roues ;
-   motofaucheuses à barre de coupe.
La présente norme s'applique également aux machines à usages multiples dans le cas de la coupe ou du broyage de l'herbe ou des broussailles ;
NOTE   Lorsqu'elles sont utilisées pour d'autres opérations (par exemple travail du sol), d'autres normes peuvent s'appliquer.
La présente norme ne s'applique pas aux tondeuses à gazon (voir l'EN ISO 5395-1, l'EN ISO 5395-2), ni aux débroussailleuses et coupe-herbe à moteur (voir l'EN ISO 11806), ni aux autres équipements d'entretien des pelouses.
Le présent document traite de tous les phénomènes, situations ou événements dangereux listés dans l'Annexe A applicables aux motofaucheuses à conducteur à pieds lorsqu’elles sont utilisées comme prévu et dans des conditions de mauvaise utilisation raisonnablement prévisibles par le fabricant.
Les aspects liés à l'environnement (excepté le bruit) n'ont pas été pris en compte dans cette norme.
Le présent document n’est pas applicable aux motofaucheuses fabriquées avant sa date de publication.
Le présent document n’est pas applicable aux motofaucheuses fabriquées avant sa date de publication.

Kmetijski in gozdarski stroji - Ročno upravljane motorne kosilnice - Varnost

Ta evropski standard določa varnostne zahteve ter njihovo preverjanje glede zasnove in izdelave ročno upravljanih motornih kosilnic z vrtljivimi ali povratnimi rezili, ki se uporabljajo v kmetijstvu, gozdarstvu ter krajinskem načrtovanju za košnjo in/ali mulčenje trave ali podobnih rastlin ali grmičevja in gozdnega rastlinja. Za namene tega standarda so kot motorne kosilnice obravnavani naslednji ročno upravljani stroji:
– mulčerji;
– kosilnice za travišča;
– stroji za odstranjevanje grmičev;
– kosilci s srpom na drogu.
Ta standard se uporablja tudi za večnamenske stroje, kadar se uporabljajo za košnjo ali mulčenje trave ali grmičev. Ta standard ne zajema vrtnih kosilnic (glej standard EN 836), motornih žag za nego in motornih kos (glej standard EN ISO 11806) ali druge opreme za vzdrževanje trate.
Ta standard opisuje metode za odpravljanje ali zmanjšanje nevarnosti, ki izhajajo iz uporabe motornih kosilnic. Poleg tega določa vrsto informacij, ki jih mora predložiti proizvajalec v zvezi z varnimi delovnimi postopki.
Okoljski vidiki v tem standardu niso obravnavani.
Ta standard se uporablja predvsem za stroje, ki so bili izdelani po datumu objave tega standarda.

General Information

Status
Published
Public Enquiry End Date
02-Oct-2016
Publication Date
14-Oct-2018
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
11-Oct-2018
Due Date
16-Dec-2018
Completion Date
15-Oct-2018

Relations

Buy Standard

Standard
EN 12733:2018
English language
92 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Land- und forstwirtschaftliche Maschinen - Handgeführte Motormäher - SicherheitMatériel agricole et forestier - Motofaucheuses à conducteur à pied - SécuritéAgricultural and forestry machinery - Pedestrian controlled motor mowers - Safety65.060.70Vrtnarska opremaHorticultural equipmentICS:Ta slovenski standard je istoveten z:EN 12733:2018SIST EN 12733:2018en01-december-2018SIST EN 12733:2018SLOVENSKI
STANDARDSIST EN 12733:2001+A1:20091DGRPHãþD



SIST EN 12733:2018



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12733
October
t r s z ICS
x wä r x rä w r Supersedes EN
s t y u uã t r r s ªA sã t r r {English Version
Agricultural and forestry machinery æ Pedestrian controlled motor mowers æ Safety Matériel agricole et forestier æ Motofaucheuses à conducteur à pied æ Sécurité
Landæ und forstwirtschaftliche Maschinen æ Handgeführte Motormäher æ Sicherheit This European Standard was approved by CEN on
t t January
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
9
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s t y u uã t r s z ESIST EN 12733:2018



EN 12733:2018 (E) 2 Contents Page European foreword . 7 Introduction . 8 1 Scope . 9 2 Normative references . 9 3 Terms and definitions . 11 4 List of hazards . 12 5 Safety requirements and/or protective/risk reduction measures . 13 5.1 General . 13 5.2 Engine starting and stopping devices . 13 5.2.1 General . 13 5.2.2 Primary engine starting . 13 5.2.3 Secondary engine starting . 13 5.2.4 Stopping . 14 5.3 Location of controls . 14 5.3.1 Controls in the hand reach zone . 14 5.3.2 Controls in the hand reach zone or foot reach zone . 14 5.3.3 Further controls . 14 5.3.4 Hand reach zone . 14 5.3.5 Foot reach zone . 15 5.4 Identification of controls . 15 5.5 Controls of the movement of the machine and of the cutting means . 16 5.6 Reverse traction drive . 17 5.7 Handlebars . 18 5.8 Pressurized components . 18 5.9 Liquid spillage . 18 5.10 Exhaust system . 18 5.10.1 Protection against exhaust gases . 18 5.10.2 Protection against hot surfaces. 18 5.11 Steering mechanism . 20 5.11.1 General . 20 5.11.2 Measurement of the steering force . 20 5.12 Brakes. 21 5.12.1 General . 21 5.12.2 Service brake . 22 5.12.3 Parking brake . 22 5.13 Maximum travel speed . 23 5.14 Electrical installations . 23 5.15 Noise . 23 5.15.1 Reduction by design and protective measures . 23 5.15.2 Reduction by information . 23 5.15.3 Noise emission measurement . 23 5.16 Vibration . 24 5.16.1 Reduction by design and protective measures . 24 5.16.2 Reduction by information . 24 5.16.3 Vibration measurement . 24 6 Specific requirements . 24 SIST EN 12733:2018



EN 12733:2018 (E) 3 6.1 Sickle bar mowers . 24 6.2 Grassland mowers . 25 6.2.1 Protection against contact with cutting blades . 25 6.2.2 Verification of the safety requirements and/or measures for grassland mowers . 27 6.2.3 Cutting blades . 35 6.2.4 Cutting blade stopping . 35 6.3 Flail mowers . 37 6.3.1 Protection against contact with cutting blades . 37 6.3.2 Protection against thrown objects . 38 6.3.3 Cutting blade stopping time . 38 6.4 Scrub clearing machines . 40 6.4.1 Protection against contact with cutting means . 40 6.4.2 Protection against thrown objects . 41 6.4.3 Structural integrity of the casing . 41 6.4.4 Cutting blades . 41 6.4.5 Cutting blade stopping time . 41 7 Information for use . 43 7.1 Instruction handbook . 43 7.1.1 General . 43 7.1.2 Additional information for scrub clearing machines . 44 7.2 Marking . 45 7.3 Warnings . 45 Annex A (normative)
List of hazards . 46 Annex B (normative)
Noise test code for motor mowers - Engineering method (grade 2) . 50 B.1 Scope . 50 B.2 A-weighted sound power level determination . 50 B.3 A-weighted emission sound pressure level determination . 52 B.4 Requirements for test floor . 52 B.5 Installation, mounting and operating conditions . 52 B.6 Measurement uncertainties and declaration of noise emission values . 53 B.7 Information to be recorded and reported . 53 Annex C (normative)
Vibration measurement of motor mowers . 54 C.1 Quantities to be measured . 54 C.2 Instrumentation . 54 C.2.1 General . 54 C.2.2 Fastening of transducer. 54 C.2.3 Calibration. 54 C.3 Measurement direction and measurement location . 54 C.3.1 Measurement direction . 54 C.3.2 Measurement location . 54 C.4 Test procedure . 55 C.4.1 General . 55 C.4.2 Test procedure for machine with rotary cutting blade(s) . 55 C.4.2.1 Test condition . 55 SIST EN 12733:2018



EN 12733:2018 (E) 4 C.4.2.2 Test procedure for reciprocating machine . 55 C.4.2.2.1Driving speed . 55 C.4.2.2.2Cutting blade . 55 C.4.2.2.3Machine centre of gravity . 55 C.4.2.2.4Test conditions . 55 C.5 Measurement procedure . 56 C.6 Determination of the measurement result . 56 Annex D (normative)
Foot probe test . 58 D.1 Test equipment . 58 D.2 Test method . 58 D.3 Test acceptance . 58 Annex E (normative)
Testing of protective skirts . 60 E.1 General . 60 E.2 Tensile resistance test . 60 E.2.1 Procedure. 60 E.2.2 Preparation of the samples . 60 E.2.3 Clamping . 60 E.2.4 Acceptance criteria . 61 E.3 Perforation resistance test . 61 E.3.1 Procedure. 61 E.3.2 Acceptance criteria . 62 E.4 Wear resistance test . 62 E.4.1 Procedure. 62 E.4.2 Acceptance criteria . 63 Annex F (normative)
Corrugated fibreboard penetration tests on grassland mowers - Test enclosure wall panels (see 6.2.2.2.4.2) . 64 F.1 Purpose . 64 F.2 Test fixture . 64 F.3 Fibreboard samples . 64 F.4 Procedure. 64 F.5 Acceptance criteria . 64 Annex G (normative)
Target elevation areas . 66 G.1 Lower elevation target . 66 G.2 Middle elevation target . 66 G.3 Top elevation target . 66 G.4 Operator target area . 66 Annex H (normative)
Test enclosure . 67 H.1 Base . 67 SIST EN 12733:2018



EN 12733:2018 (E) 5 H.2 Target composition . 67 Annex I (normative)
Thrown object test for flail mower . 70 I.1 Principle . 70 I.2 Testing conditions . 70 I.2.1 Mower used for test . 70 I.2.1.1 General . 70 I.2.1.2 Thrown-object guard adjustment . 70 I.2.1.3 Cutting height . 70 I.2.2 Test surface area . 70 I.2.2.1 Ground conditions . 70 I.2.2.2 Coconut matting . 70 I.2.2.3 Sand layer (natural, crushed or uncrushed). 70 I.2.2.4 Moisture . 70 I.3 Target . 71 I.3.1 General . 71 I.3.2 Target construction . 71 I.3.2.1 General . 71 I.3.2.2 Panels . 71 I.3.2.3 Target material attachment . 71 I.3.3 Reference lines . 72 I.4 Test material . 74 I.4.1 Test material preparation . 74 I.4.2 Moisture for test material. 75 I.4.3 Test material configuration . 75 I.5 Test run conditions . 76 I.6 Test procedure . 76 I.7 Test result and report . 77 I.8 Acceptance criteria . 77 I.9 Thrown object test report for flail mower machine . 78 I.9.1 Specifications . 78 I.9.2 Primary tests report . 79 I.9.3 Additional test report . 81 Annex J (normative)
Thrown object test for scrub clearing machines . 83 J.1 Test equipment. 83 J.1.1 Test surface . 83 J.1.2 Target . 83 J.1.3 Balls . 83 SIST EN 12733:2018



EN 12733:2018 (E) 6 J.1.4 Injection point . 83 J.1.5 Injection tube . 83 J.1.6 Preliminary adjustments of the velocity . 83 J.2 Test method . 83 J.2.1 General . 83 J.2.2 Balls velocity . 83 J.2.3 Test procedure . 84 J.2.4 Test result and acceptance . 84 J.3 Data sheet - Thrown object test for scrub clearing machine . 85 Annex K (informative)
Example of a
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.