SIST EN ISO 5395-3:2014/A1:2017

SLOVENSKI STANDARD
SIST EN ISO 5395-3:2014/A1:2017
01-marec-2017
Oprema za nego vrta - Varnostne zahteve za motorne vrtne kosilnice - 3. del:
Kosilnice s sedežem za košnjo v sedečem položaju - Dopolnilo A1: OPC, parkirna
zavora, ROPS, cevi pod tlakom, sredstva za rezanje, lovilec trave in preskusna
sonda (ISO 5395-3:2013/Amd 1:2017, popravljena različica 2017-03)
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers -
Part 3: Ride-on lawnmowers with seated operator - Amendment 1: OPC, Parking brake,
ROPS, pressurized hoses, cutting means, grass catcher and test probe (ISO 5395-
3:2013/Amd 1:2017, Corrected version 2017-03)
Gartengeräte - Sicherheitsanforderungen für verbrennungsmotorisch angetriebene
Rasenmäher - Teil 3: Rasenmäher mit Fahrersitz mit sitzendem Benutzer - Änderung 1:
OPC, Feststellbremse, ROPS, unter Druck stehende Schläuche, Schneidwerkzeuge,
Grasfangeinrichtung und Prüfarm (ISO 5395-3:2013/Amd.1:2017, Korrigierte Fassung
2017-03)
Matériel de jardinage - Exigences de sécurité pour les tondeuses à gazon à moteur à
combustion interne - Partie 3: Tondeuses à gazon à conducteur assis - Amendement 1:
OPC, frein de stationnement, ROPS, tuyaux sous pression, organes de coupe, bac de
ramassage et gabarit d'essai (ISO 5395-3:2013/Amd 1:2017, Version corrigée 2017-03)
Ta slovenski standard je istoveten z: EN ISO 5395-3:2013/A1:2017
ICS:
65.060.70 Vrtnarska oprema Horticultural equipment
SIST EN ISO 5395-3:2014/A1:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 5395-3:2014/A1:2017

---------------------- Page: 2 ----------------------
SIST EN ISO 5395-3:2014/A1:2017


EN ISO 5395-3:2013/A1
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2017
EUROPÄISCHE NORM
ICS 65.060.70
English Version

Garden equipment - Safety requirements for combustion-
engine-powered lawnmowers - Part 3: Ride-on
lawnmowers with seated operator - Amendment 1: OPC,
Parking brake, ROPS, pressurized hoses, cutting means,
grass catcher and test probe (ISO 5395-3:2013/Amd
1:2017, Corrected version 2017-03)
Matériel de jardinage - Exigences de sécurité pour les Gartengeräte - Sicherheitsanforderungen für
tondeuses à gazon à moteur à combustion interne - verbrennungsmotorisch angetriebene Rasenmäher -
Partie 3: Tondeuses à gazon à conducteur assis - Teil 3: Rasenmäher mit Fahrersitz mit sitzendem
Amendement 1: OPC, frein de stationnement, ROPS, Benutzer, Änderung 1: OPC, Feststellbremse, ROPS,
tuyaux sous pression, organes de coupe, bac de unter Druck stehende Schläuche, Schneidwerkzeug,
ramassage et gabarit d'essai (ISO 5395-3:2013/Amd Grasfangeinrichtung und Prüfarm (ISO 5395-
1:2017, Version corrigée 2017-03) 3:2013/Amd 1:2017, korrigierte Fassung 2017-03)
This amendment A1 modifies the European Standard EN ISO 5395-3:2013; it was approved by CEN on 19 September 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5395-3:2013/A1:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 5395-3:2014/A1:2017
EN ISO 5395-3:2013/A1:2017 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC, Machinery aimed to be covered . 4


2

---------------------- Page: 4 ----------------------
SIST EN ISO 5395-3:2014/A1:2017
EN ISO 5395-3:2013/A1:2017 (E)
European foreword
This document (EN ISO 5395-3:2013/A1:2017) has been prepared by Technical Committee ISO/TC 23
“Tractors and machinery for agriculture and forestry” in collaboration with Technical Committee
CEN/TC 144 “Tractors and machinery for agriculture and forestry” the secretariat of which is held by
AFNOR.
This Amendment to the European Standard EN ISO 5395-3:2013 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by August 2017, and
conflicting national standards shall be withdrawn at the latest by August 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 5395-3:2013/Amd 1:2017, Corrected version 2017-03 has been approved by CEN as
EN ISO 5395-3:2013/A1:2017 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 5395-3:2014/A1:2017
EN ISO 5395-3:2013/A1:2017 (E)
Replace Annex ZA by the following:
Annex ZA
(informative)

Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC, Machinery aimed to be covered
This European Standard has been prepared under a Commission’s standardization request M/396 to
provide one voluntary means of conforming to essential requirements of Directive 2006/42/EC on
Machinery.
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding essential requirements
of that Directive, and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Annex 1 of
Directive 2006/42/EC
Essential Requirements of Clause(s)/subclause(s) of this
Remarks/Notes
Directive 2006/42/EC EN
All relevant Essential All normative 1) Compliance with
Requirements clauses/subclauses including EN ISO 5395-1 and
4.3, 4.4.3, 4.7, 4.14, 5.2 and A.2.7 EN ISO 5395-3 is required to
achieve presumption of
conformity.
2) Compliance with all the
requirements 4.3, 4.4.3, 4.7, 4.14,
5.2 and A.2.7.is required to
achieve presumption of
conformity.
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.

4

---------------------- Page: 6 ----------------------
SIST EN ISO 5395-3:2014/A1:2017
INTERNATIONAL ISO
STANDARD 5395-3
Second edition
2013-09-01
AMENDMENT 1
2017-02-01
Corrected version
2017-03
Garden equipment — Safety
requirements for combustion-engine-
powered lawnmowers —
Part 3:
Ride-on lawnmowers with seated
operator
AMENDMENT 1: OPC, Parking brake,
ROPS, pressurized hoses, cutting means,
grass catcher and test probe
Matériel de jardinage — Exigences de sécurité pour les tondeuses à
gazon à moteur à combustion interne —
Partie 3: Tondeuses à gazon à conducteur assis
AMENDEMENT 1: OPC, frein de stationnement, ROPS, tuyaux sous
pression, organes de coupe, bac de ramassage et gabarit d’essai
Reference number
ISO 5395-3:2013/Amd.1:2017(E)
©
ISO 2017

---------------------- Page: 7 ----------------------
SIST EN ISO 5395-3:2014/A1:2017
ISO 5395-3:2013/Amd.1:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intrane
...