SIST EN ISO 7437:1998

SLOVENSKI STANDARD
01-maj-1998
7HKQLþQHULVEH*UDGEHQLãNHULVEH6SORãQDSUDYLOD]DULVDQMHGHODYQLãNLKQDþUWRY
PRQWDåQLKHOHPHQWRY,62
Technical drawings - Construction drawings - General rules for execution of production
drawings for prefabricated structural components (ISO 7437:1990)
Zeichnungen für das Bauwesen - Allgemeine Regeln für die Erstellung von
Fertigungszeichnungen für vorgefertigte Teile (ISO 7437:1990)
Dessins techniques - Dessins de construction - Regles générales pour l'élaboration de
dessins d'exécution pour des composants de structure préfabriquées (ISO 7437:1990)
Ta slovenski standard je istoveten z: EN ISO 7437:1996
ICS:
01.100.30 *UDGEHQLQDþUWL Construction drawings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

Iso
INTERNATIONAL
STANDARD 7437
First edition
1990-09-O 1
Technical drawings - Construction drawings -
General rules for execution of production
drawings for prefabricated
structural components
- Dessins de construction - R@gies gihkales pour
Dessins techniques
IWaboration de dessins d ’exkution pour des composants de structure
pr6fabriqukes
---- ----- -~
---- --
Reference number
IS0 7437: 1990(E)
IS0 7437:1990(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work
of preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the
work. IS0 collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an Interna-
tional Standard requires approval by at least 75 % of the member bodies
casting a vote.
International Standard IS0 7437 was prepared by Technical Committee
ISO/TC 10, Technical drawings, product definition and related documen-
tation.
0 IS0 1990
All rights reserved. No part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without
permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1211 Geneve 20 l Switzer land
Printed in Switzerland
ii
------.- -- . .~ -------
INTERNATIONAL STANDARD IS0 7437:1990(E)
Technical drawings - Construction drawings - General rules
for execution of production drawings for prefabricated
structural components
3 Execution of production drawings
1 Scope
This International Standard establishes general
3.1 General rules
rules for the execution of production drawings for
prefabricated structural components.
3.1.1 Production drawings for (moulded and non-
The documentation for such prefabricated compo-
moulded) prefabricated structural components shall
nents includes drawings, specifications and sched-
define the shape and composition of the compo-
ules. This International Standard deals only with
nents. They shall be fully dimensioned and shall
drawings.
provide all the information necessary for the manu-
facture, inspection and further handling of the com-
NOTE 1 Specifications and schedules may be prepared
ponents, such as
as separate documents, or as additional information on
the drawing sheet.
a) designations of the components,
b) reinforcement,
2 Normative references
c) surface requirements,
The following standards contain provisions which,
d) built
...