iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST-TS CEN/TS 15436-3:2009

(Main)

Road service area maintenance equipment - Part 3: Classification

Road service area maintenance equipment - Part 3: Classification

This Technical Specification defines the classification criteria of the road service area maintenance equipment described in the scope of EN 15436-1 and used for:
   grass cutting and brushcutting;
   mechanical plant cutting.
This equipment is mounted on self-propelled carrying vehicles, and is intended, on the one hand, for cutting and shredding grass and brushwood, and, on the other hand, for trimming trees, saplings and bushes in road service areas.

Straßenbetriebsdienstausstattung - Teil 3: Klassifikation

Diese Technische Spezifikation legt die Klassifizierungskriterien von Straßenunterhaltungsgeräten fest, die im Anwendungsbereich von EN 15436-1 beschrieben werden und mit denen folgende Tätigkeiten ausgeführt werden:
- Mäharbeiten und Gestrüppentfernung;
- mechanisches Schneiden von Pflanzen.
Die vorgenannten Geräte sind auf Trägerfahrzeugen mit Eigenantrieb montiert und sind einerseits dafür vorgesehen Gras zu mähen und Gestrüpp zu verkleinern, und andererseits Bäume oder junge, unbeschnittene Bäume und Sträucher in Straßenrandbereichen zu schneiden.

Matériel d'entretien des dépendances routières - Partie 3: Classification

La présente Spécification Technique définit les critères de classification des matériels d’entretien des dépendances routières décrits dans le domaine d’application de la norme EN 15436-1, c’est-à-dire :
- fauchage et débroussaillage ;
- taille mécanique des végétaux.
Ces matériels sont montés sur porteur automoteur et sont destinés d'une part à faucher et broyer l'herbe et les broussailles et d'autre part à tailler les arbres, baliveaux et arbustes, des dépendances routières.

Oprema za vzdrževalna dela zimske službe in službe za vzdrževanje cest - 3. del: Klasifikacija

General Information

Status
Withdrawn
Publication Date
17-Mar-2009
Withdrawal Date
26-Jul-2015
ICS
43.160 - Special purpose vehicles
Technical Committee
I13 - Imaginarni 13
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
24-Jul-2015
Due Date
16-Aug-2015
Completion Date
27-Jul-2015
Ref Project
CEN/TS 15436-3:2009 - Road service area maintenance equipment - Part 3: Classification

Relations

Replaced By
SIST EN 15436-3:2015 - Road service area maintenance equipment - Part 3: Classification
Effective Date
01-Sep-2015

Buy Standard

TS CEN/TS 15436-3:2009TS CEN/TS 15436-3:2009
PreviousNext
Technical specification
TS CEN/TS 15436-3:2009
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 15436-3:2009
01-maj-2009
Oprema za vzdrževalna dela zimske službe in službe za vzdrževanje cest - 3. del:
Klasifikacija
Road service area maintenance equipment - Part 3: Classification
Straßenbetriebsdienstausstattung - Teil 3: Klassifikation
Matériel d'entretien des dépendances routières - Partie 3: Classification
Ta slovenski standard je istoveten z: CEN/TS 15436-3:2009
ICS:
43.160 Vozila za posebne namene Special purpose vehicles
SIST-TS CEN/TS 15436-3:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN/TS 15436-3:2009

---------------------- Page: 2 ----------------------

SIST-TS CEN/TS 15436-3:2009
TECHNICAL SPECIFICATION
CEN/TS 15436-3
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
February 2009
ICS 43.160
English Version
Road service area maintenance equipment - Part 3:
Classification
Matériel d'entretien des dépendances routières - Partie 3: Straßenbetriebsdienstausstattung - Teil 3: Klassifikation
Classification
This Technical Specification (CEN/TS) was approved by CEN on 22 December 2008 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 15436-3:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN/TS 15436-3:2009
CEN/TS 15436-3:2009 (E)
Contents Page
Foreword .3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
4 Definition of machine classes .5
4.1 Machine class .5
4.2 Tolerances on characteristics for machine construction .7

2

---------------------- Page: 4 ----------------------

SIST-TS CEN/TS 15436-3:2009
CEN/TS 15436-3:2009 (E)
Foreword
This document (CEN/TS 15436-3:2009) has been prepared by Technical Committee CEN/TC 337 “Winter
maintenance and road service area maintenance equipment”, the secretariat of which is held by AFNOR.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This Technical Specification was prepared with the aim of having a 3-year lifetime.
This European standard comprises four parts:
 EN 15436-1, Road service area maintenance equipment – Part 1: Terminology;
 EN 15436-2, Road service area maintenance equipment – Part 2: Performance assessment;
 CEN/TS 15436-3, Road service area maintenance equipment – Part 3: Classification;
 prEN 15436-4, Road service area maintenance equipment – Part 4: Delivery acceptance of the machines
by the users.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
3

---------------------- Page: 5 ----------------------

SI
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 1501-4:2023(Main)
Refuse collection vehicles - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles
EN 1501-4:2023

This European Standard provides all of the information required in order to efficiently perform, and in standardized conditions, the determination, the declaration and the verification of noise emission values of refuse collection vehicles.
The use of this annex ensures the reproducibility of the determination of noise emission values within the limits established for the accuracy grade of the basic standard used to determine noise emission values. The methods used to determine these noise emission values, corresponding to this normative annex, are grade 2 accuracy measurement methods.
This standard deals with the noise measurement conditions for the types of RCVs defined and described in the standards of the EN 1501 series
This European Standard applies to machines which are manufactured after the date of approval of this standard by CEN.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17106-1:2021(Main)
Road operation machinery - Safety - Part 1: General requirements
EN 17106-1:2021

This document specifies the common safety requirements for road operation machinery.
This document deals with the significant hazards common to road operation machinery, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (transport, assembly, dismantling, equipment in service and out of service, maintenance, moving on site, storage, disabling and scrapping).
NOTE    The requirements specified in this part of the standard are common to two or more families of road operation machinery.
This document gives safety requirements for all types of road operation machinery and shall be used in conjunction with one of parts x to xx.
These machine specific parts do not repeat the requirements from part 1 but supplement or modify the requirements for the type of road operation machinery in question.
This European Standard applies to:
a)   Road surface cleaning machines (as currently defined in EN 15429-1);
b)   Winter service machines (as defined in group 1 and 2 of EN 15144);
c)   Road service area maintenance machines for:
   grass cutting (see Clause 3.1.1.1 of EN 15436-1:2008);
   brush/hedge cutting (see Clause 3.1.1.2 of EN 15436-1:2008);
   mechanical plant/branch cutting (see Clauses 3.1.2 and 3.2.3 of EN 15436-1:2008).
This standard deals with:
a)   equipment permanently mounted on carrier vehicles;
b)   interchangeable equipment;
c)   self-propelled machinery with an integrated  specially designed chassis;
d)   trailed machines;
e)   interfaces.
For multipurpose machinery the parts of the standard that cover the specific functions and applications have to be used, e.g. sweeper used for spreading thawing material or snow removing machines with brooms and ploughs shall use the relevant requirements of prEN xxx parts x, x, x.
Road operation machinery within the scope of prEN xxx parts x to x may include interchangeable auxiliary equipment within the scope of prEN xxx part x either as an integral part of its construction or as interchangeably fitted equipment.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17106-3-1:2021(Main)
Road operation machinery - Safety - Part 3-1: Winter service machines - Requirements for snow clearing machines with rotating tools and snow ploughs
EN 17106-3-1:2021

This document, together with part 1, deals with all significant hazards for winter service machines – snow cleaning machines with rotating tools when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in
prEN xxx-1:20xx.
This document does not repeat the requirements from prEN xxx-1:20xx, but adds or replaces the requirements for application for winter service machines – snow cleaning machines with rotating tools.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17106-3-2:2021(Main)
Road operation machinery - Safety - Part 3-2: Winter service machines - Specific requirements for spreading machines
EN 17106-3-2:2021

This European Standard, together with part 1, deals with all significant hazards for winter service machines - spreading machines when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in
prEN 17106-1.
This document does not repeat the requirements from prEN 17106-1, but adds or replaces the requirements for application for winter service machines - spreading machines.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17106-2:2021(Main)
Road operation machinery - Safety - Part 2: Specific requirements for road surface cleaning machines
EN 17106-2:2021

This document, together with part 1, deals with all significant hazards for road surface cleaning machines when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in
prEN xxx-1:20xx.
This document does not repeat the requirements from prEN xxx-1:20xx, but adds or replaces the requirements for application for road surface cleaning machines.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17106-4:2021(Main)
Road operation machinery - Safety - Part 4: Road service area maintenance machines - Requirements for grass and brush cutting machines
EN 17106-4:2021

This European Standard applies to machines used for road service area maintenance which are attached to or mounted on carrier vehicles (e.g. tractor, truck), or which are self-propelled machinery and which are defined in Clause 3. Directives and standards for the vehicular truck or tractor chassis aspect, termed 'carrier vehicle' in this standard, would be those relevant to that equipment.
For machinery which are a combination of a grass/brush-cutting attachment and a carrier-vehicle, this part of the standard applies to the grass or brush cutting attachment itself and with all health and safety requirements of the interaction and effects between attachment and the carrier vehicle when used together (e.g. stability, visibility).
For self-propelled machinery, this part only deals with health and safety requirements of the attachment itself and does not deal with the self-propelled machinery itself which are dealt with in EN 17106 1.
NOTE 1   Road regulations or Directive apply to vehicular truck and tractor.
NOTE 2   The use in public road traffic is governed by the national regulations.
This European Standard deals with all significant hazards identified through a risk assessment pertinent to road service area maintenance machines, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). This European Standard does not deal with significant hazards associated with EMC. This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards associated with machine operation, setting and adjustments, load discharge and routine maintenance.
This European Standard does not include requirements for the carrier vehicles (e.g. trucks, tractors, construction machines, industrial trucks). These are covered in directives related to the construction of vehicles.
This European Standard does not deal with:
—   walker-operated and hand-held machines;
—   machines for the maintenance of sports grounds;
—   machines for agriculture, horticulture and forestry;
—   pit and sewer cleaning vehicles/-machines;
—   grass and brush cutting machines with multiple cutting heads (see Annex A, Clause C.2, Figure C.20)
—   vertical axis grass and brush cutting machines except inter-post machinery (see Annex A, Clause C.2, Figure C.22)
—   horizontal axis grass and brush cutting machines with two rotors (see Annex A, Clause C.2, Figure C.23)
—   self-propelled remote controlled machinery for road service area maintenance, except the mowing head
—   self-propelled remote controlled machinery used for forestry application (see Annex A, Clause C.2, Figure C.21)
—   cleansing and ditch maintenance machines (see Annex A, Clause C.2, Figure C.24 and C.25)
A machine which is a combination of several parts with different uses should conform to all the standards referring to the corresponding parts of the machine.
This document, together with part 1, deals with all significant hazards for road service area maintenance machines – grass and brush cutting machines when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in prEN 17106 1:2017.
This document does not repeat the requirements from prEN 17106 1:2017, but adds or replaces the requirements for application for grass and brush cutting machines.
This European Standard does not deal with the risks associated with the operation of machines in potentially explosive atmospheres.
This standard applies to machines manufactured after the date of approval of this standard through CEN.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1501-2:2021(Main)
Refuse collection vehicles - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles
EN 1501-2:2021

This document applies to side loaded refuse collection vehicle (RCV), as defined in prEN 1501-1.
This document deals with all significant hazards, hazardous situations and events relevant to the side loaded RCV, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, throughout its foreseeable lifetime, as defined in Clause 4.
This document is applicable to the design and construction of the side loaded RCV so as to ensure that it is fit for its intended function and can be operated, moved, cleaned (including unblocking), adjusted and maintained during its entire lifetime. It is not applicable to the end of life of the side loaded RCV.
This document describes and defines the safety requirements of side loaded RCV excluding the interface with the lifting device(s) and excluding the lifting device itself and excluding loader cranes, which could be mounted on the RCV.
Safety requirements for the lifting device(s) including the loader cranes and the interface to the RCV are defined in prEN 1501-5.
Safety requirements for loader cranes are defined in EN 12999.
This document also applies to compactors, operated on a truck for collecting purposes.
This document is not applicable to:
-   below −25 °C and above +40 °C temperatures;
-   tropical environment;
-   wind velocity in excess of 75 km/h;
-   contaminating environment;
-   corrosive environment;
-   operation in potentially explosive atmospheres;
-   handling of loads the nature of which could lead to dangerous situations (e.g. hot refuses, acids and bases, radioactive materials, contaminated refuse, especially fragile loads, explosives);
-   operation on ships.
This document is not applicable to machinery which is manufactured before the date of publication of this document by CEN.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1501-5:2021(Main)
Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles
EN 1501-5:2021

This document deals with all significant hazards, hazardous situations and events relevant to lifting devices used for the emptying of designated refuse containers into RCVs and their fitting onto the RCVs when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer throughout their foreseeable lifetime as defined in Clause 4.
This document is applicable to the design and construction of the refuse container lifting devices and the mounting of other lifting devices so as to ensure that they are fitted for their function and can be operated, adjusted and maintained during their entire lifetime. It is not applicable to the end of life of the lifting devices.
This document describes and gives the safety requirements of the lifting devices for emptying refuse containers and their interfaces with the corresponding parts of the RCVs and will be used in conjunction with prEN 1501-1 for the rear, side and front loaded RCVs. It refers to EN 1501-4 for the noise test code.
This document is not applicable to:
-   operation in severe conditions e.g. extreme environmental conditions such as:
-   temperatures below −25 °C and above +40 °C;
-   tropical environment;
-   wind velocity in excess of 75 km/h;
-   contaminating environment;
-   corrosive environment;
-   operation in potentially explosive atmospheres;
-   lifting and transportation of persons;
-   emptying refuse containers other than those manufactured according to EN 840 (all parts), EN 12574 (all parts), EN 13071 (all parts), and those described as paladin, diamond, skip containers;
-   loading bulky refuse by means of platform or forks;
-   handling of loads the nature of which could lead to dangerous situations (e.g. hot refuses, acids and bases, radioactive materials, contaminated refuse, especially fragile loads, explosives);
-   operation on ships;
-   fitting and operation on stationary compactors.
This document is not applicable to machinery which is manufactured before the date of its publication by CEN.

  • Standard
    95 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1501-1:2021(Main)
Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles
EN 1501-1:2021

This document applies to rear loaded refuse collection vehicles (RCV), as defined in 3.2.
This document deals with all significant hazards, hazardous situations and events relevant to the rear loaded RCV, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, throughout its foreseeable lifetime, as defined in Clause 4.
This document is applicable to the design and construction of the rear loaded RCV so as to ensure that it is fit for its function and can be operated, adjusted and maintained during its entire lifetime. It is not applicable to the end of life of the rear loaded RCV.
This document describes and defines the safety requirements of rear loaded RCVs excluding the interface tailgate/discharge door with the lifting device(s) and the lifting device(s) as illustrated in Figure A.1.
Safety requirements for the lifting device(s) and the interface with the tailgate/discharge door are defined in prEN 1501-5. Safety requirements for loader cranes are defined in EN 12999.
This European Standard is not applicable to:
-   operation in severe conditions, e.g. extreme environmental conditions such as:
-   below -25 °C and above +40 °C temperatures;
-   tropical environment;
-   wind velocity in excess of 75 km/h;
-   contaminating environment;
-   corrosive environment;
-   operation in potentially explosive atmospheres;
-   handling of loads the nature of which could lead to dangerous situations (e.g. hot refuses, acids and bases, radioactive materials, contaminated refuse, especially fragile loads, explosives);
-   operation on ships.
This document is not applicable to machinery which is manufactured before the date of publication of this document by CEN.

  • Standard
    78 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1501-3:2021(Main)
Refuse collection vehicles - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles
EN 1501-3:2021

This document applies to front loaded refuse collection vehicle (RCV), as defined in 3.2 with closed system defined in 3.13.
This document deals with all significant hazards, hazardous situations and events relevant to the front loaded RCV, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, throughout its foreseeable lifetime, as defined in Clause 4.
This document is applicable to the design and construction of the front loaded RCV so as to ensure that it is fitted for its function and can be operated adjusted and maintained during its entire lifetime. It is not applicable to the end of life of the front loaded RCV.
prEN 1501-3 describes and defines the safety requirements of front loaded RCV excluding the interface with the lifting device(s) and excluding the lifting device itself and excluding loader cranes, which could be mounted on the RCV.
Safety requirements for the lifting device(s), loader cranes and their interface to the RCV are defined in prEN 1501-5.
Safety requirements for loader cranes are defined in EN 12999. Additional requirements to loader cranes installed as a loading device for handling containers for refuse or recyclable material on RCVs are defined in prEN 1501 5.
This document also applies to compactors, operated on a truck for collecting purposes.
This document is not applicable to:
-   operation in severe conditions e.g. extreme environmental conditions such as:
-   below −25 °C and above +40 °C temperatures;
-   tropical environment;
-   wind velocity in excess of 75 km/h;
-   contaminating environment;
-   corrosive environment;
-   operation in potentially explosive atmospheres;
-   handling of loads the nature of which could lead to dangerous situations (e.g. hot refuses, acids and bases, radioactive materials, contaminated refuse, especially fragile loads, explosives);
-   operation on ships.
This document is not applicable to machinery which is manufactured before the date of publication of this document by CEN.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day