kSIST FprEN ISO 17827-1:2024
(Main)Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above (ISO/FDIS 17827-1:2024)
Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above (ISO/FDIS 17827-1:2024)
ISO 17827-1:2016 specifies a method for the determination of the size distribution of particulate biofuels by the horizontally oscillating screen method. It applies to particulate uncompressed fuels with a nominal top size of 3,15 mm and above, e.g. wood chips, hog fuel, olive stones, etc. The method is intended to characterize material up to a particle size class of P63. For larger P-classes, the characterization is mainly done by hand sorting.
Biogene Festbrennstoffe - Bestimmung der Partikelgrößenverteilung für unkomprimierte Brennstoffe - Teil 1: Horizontales Rüttelsiebverfahren mit Sieben mit einer Lochgröße von 3,15 mm und darüber (ISO/FDIS 17827-1:2024)
Dieses Dokument legt ein Verfahren zur Bestimmung der Größenverteilung von biogenen Brennstoffen als Schüttgut durch das horizontale Rüttelsiebverfahren fest. Es gilt für Schüttgut von ungepressten Brennstoffen mit einer nominellen Siebgröße von 3,15 mm und darüber, wie z. B. Holzhackschnitzeln, Schredderholz, Olivensteinen usw.
Das Verfahren ist zur Charakterisierung von Material bis zu einer Partikelgrößenklasse (P) von P63 vorgesehen. Bei höheren P Klassen und PL Klassen erfolgt die Charakterisierung hauptsächlich durch Handsortierung.
ANMERKUNG Die Definitionen und Spezifikationen von P und PL Klassen sind in ISO 17225 1, ISO 17225 4 und ISO 17225 9 angeführt.
Biocombustibles solides - Détermination de la distribution granulométrique des combustibles non comprimés - Partie 1: Méthode au tamis oscillant d'ouverture de maille égale ou supérieure à 3,15 mm (ISO/FDIS 17827-1:2024)
ISO 17827-1:2016 spécifie une méthode pour la détermination de la distribution granulométrique de biocombustibles particulaires au tamis oscillant dans le plan horizontal. Elle s'applique aux combustibles particulaires non comprimés de dimension supérieure nominale égale ou supérieure à 3,15 mm, tels que les copeaux, les bûchettes, les noyaux d'olive, etc. La méthode a pour but de caractériser les matériaux jusqu'à une classe granulométrique de P63. Pour les classes en P supérieures, la caractérisation se fait essentiellement par tri manuel.
Trdna biogoriva - Določanje porazdelitve velikosti delcev za nekomprimirana goriva - 1. del: Metoda z nihajočim sitom z odprtinami 3,15 mm ali več (ISO/FDIS 17827-1:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 17827-1:2023
01-marec-2023
Trdna biogoriva - Določanje porazdelitve velikosti delcev za nekomprimirana
goriva - 1. del: Metoda z nihajočim sitom z odprtinami 3,15 mm ali več (ISO/DIS
17827-1:2022)
Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 1:
Oscillating screen method using sieves with apertures of 3,15 mm and above (ISO/DIS
17827-1:2022)
Biogene Festbrennstoffe - Bestimmung der Partikelgrößenverteilung für unkomprimierte
Brennstoffe - Teil 1: Horizontales Rüttelsiebverfahren mit Sieben mit einer Lochgröße
von 3,15 mm und darüber (ISO/DIS 17827-1:2022)
Biocombustibles solides - Détermination de la distribution granulométrique des
combustibles non comprimés - Partie 1: Méthode au tamis oscillant d'ouverture de maille
égale ou supérieure à 3,15 mm (ISO/DIS 17827-1:2022)
Ta slovenski standard je istoveten z: prEN ISO 17827-1
ICS:
75.160.40 Biogoriva Biofuels
oSIST prEN ISO 17827-1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 17827-1:2023
---------------------- Page: 2 ----------------------
oSIST prEN ISO 17827-1:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 17827-1
ISO/TC 238 Secretariat: SIS
Voting begins on: Voting terminates on:
2022-12-27 2023-03-21
Solid biofuels — Determination of particle size distribution
for uncompressed fuels —
Part 1:
Oscillating screen method using sieves with apertures of
3,15 mm and above
Biocombustibles solides — Détermination de la distribution granulométrique des combustibles non
comprimés —
Partie 1: Méthode au tamis oscillant d'ouverture de maille égale ou supérieure à 3,15 mm
ICS: 75.160.40; 27.190
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 17827-1:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 3 ----------------------
oSIST prEN ISO 17827-1:2023
ISO/DIS 17827-1:2022(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 17827-1
ISO/TC 238 Secretariat: SIS
Voting begins on: Voting terminates on:
Solid biofuels — Determination of particle size distribution
for uncompressed fuels —
Part 1:
Oscillating screen method using sieves with apertures of
3,15 mm and above
Biocombustibles solides — Détermination de la distribution granulométrique des combustibles non
comprimés —
Partie 1: Méthode au tamis oscillant d'ouverture de maille égale ou supérieure à 3,15 mm
ICS: 75.160.40; 27.190
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2022
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 17827-1:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2022 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 4 ----------------------
oSIST prEN ISO 17827-1:2023
ISO/DIS 17827-1:2022(E)
Contents Page
Foreword .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.