iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 62013-1:2002

(Main)

Caplights for use in mines susceptible to firedamp -- Part 1: General requirements - Construction and testing in relation to the risk of explosion

Caplights for use in mines susceptible to firedamp -- Part 1: General requirements - Construction and testing in relation to the risk of explosion

Specifies requirements for the construction and testing of caplights for use in mines susceptible to firedamp (Group I - electrical apparatus for explosive gas atmospheres as defined in IEC 60079-0). It deals only with the risk of caplight becoming a source of ignition. The requirements of IEC 60079-0 do not apply unless specified. Is also applicable to caplights intended for use in mines which have become temporarily endangered by an explosive atmosphere of firedamp.

Kopfleuchten für die Verwendung in schlagwettergefährdeten Grubenbauen -- Teil 1: Allgemeine Anforderungen - Konstruktion und Prüfung in Relation zum Explosionsrisiko

Lampes-chapeaux utilisables dans les mines grisouteuses -- Partie 1: Règles générales - Construction et essais en relation avec le risque d'explosion

Rudarske naglavne svetilke za uporabo v rudnikih, kjer je možen pojav eksplozivnih plinov - 1. del: Splošne zahteve - Konstrukcija in preskušanje zaradi nevarnosti eksplozije (IEC 62013-1:1999; spremenjen)

General Information

Status
Withdrawn
Publication Date
31-Aug-2002
Withdrawal Date
02-Apr-2009
ICS
29.260.20 - Electrical apparatus for explosive atmospheres
73.100.20 - Ventilation, air-conditioning and illumination equipment
Technical Committee
EXP - Electrical apparatus for explosive atmospheres
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
25-Mar-2009
Due Date
17-Apr-2009
Completion Date
03-Apr-2009
Directive
94/9/EC - Directive 94/9/EC of the European Parliament and the Council of 23 March 1994 on the approximation of the laws of the Member States concerning equipment and protective systems intended for use in potentially explosive atmospheres
Ref Project
EN 62013-1:2002 - Caplights for use in mines susceptible to firedamp - Part 1: General requirements - Construction and testing in relation to the risk of explosion

Relations

Revised
SIST EN 62013-1:2006 - Caplights for use in mines susceptible to firedamp -- Part 1: General requirements - Construction and testing in relation to the risk of explosion
Effective Date
13-May-2010
Replaced By
SIST EN 62013-1:2006 - Caplights for use in mines susceptible to firedamp -- Part 1: General requirements - Construction and testing in relation to the risk of explosion
Effective Date
29-Jan-2023
Replaced By
SIST EN 62013-1:2006 - Caplights for use in mines susceptible to firedamp -- Part 1: General requirements - Construction and testing in relation to the risk of explosion
Effective Date
01-May-2009

Buy Standard

EN 62013-1:2002EN 62013-1:2002
PreviousNext
Standard
EN 62013-1:2002
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 60079-35-2:2012(Main)
Caplights for use in mines susceptible to firedamp - Part 2: Performance and other safety-related matters (IEC 60079-35-2:2011)
EN 60079-35-2:2012

This part of IEC 60079-35 details those performance and other safety features of caplights, including those with a point of connection for another equipment, not covered in IEC 60079-35-1, but which are important for the safety and working conditions of the user. It may also be applied to caplights for use in mines not likely to be endangered by firedamp.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60079-35-1:2011/AC:2011(Corrigendum)
Caplights for use in mines susceptible to firedamp - Part 1: General requirements - Construction and testing in relation to the risk of explosion
EN 60079-35-1:2011/AC:2011
  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60079-35-1:2011(Main)
Caplights for use in mines susceptible to firedamp - Part 1: General requirements - Construction and testing in relation to the risk of explosion (IEC 60079-35-1:2011)
EN 60079-35-1:2011

This part of IEC 60079-35 specifies requirements for the construction, testing and marking of caplights, including caplights with a point of connection for other equipment, for use in mines susceptible to firedamp (Group I - electrical equipment for explosive gas atmospheres as defined in IEC 60079-0). It deals only with the risk of the caplight becoming a source of ignition. The requirements for performance are in IEC 60079-35-2.1 This standard supplements and modifies the general requirements of IEC 60079-0 except as indicated in Table 1. Where a requirement of this standard conflicts with a requirement of IEC 60079-0, the requirements of this standard take precedence. Compliance with this standard will provide an EPL of Mb (see 4.1 of this standard). If an EPL of Ma is required, the caplight will need to conform to the requirements of 4.2 of this standard, which in turn refers to IEC 60079-11. It is expected that from time to time, caplights conforming to this standard (EPL Mb) will operate in atmospheres where the firedamp exceeds statutory levels that require the withdrawal of people from the high firedamp atmosphere to a non-hazardous area. In designing equipment for operation in conditions other than those given above, this standard may be used as guidance; however, additional testing may be required. Where a caplight is assessed as intrinsically safe equipment, Ex ia, conforming to IEC 60079- 11 only the clauses/subclauses listed in 4.2 require application.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60079-35-2:2012(Main)
Caplights for use in mines susceptible to firedamp - Part 2: Performance and other safety-related matters (IEC 60079-35-2:2011)
EN 60079-35-2:2012

This part of IEC 60079-35 details those performance and other safety features of caplights, including those with a point of connection for another equipment, not covered in IEC 60079-35-1, but which are important for the safety and working conditions of the user. It may also be applied to caplights for use in mines not likely to be endangered by firedamp.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60079-35-1:2011/AC:2011(Corrigendum)
Caplights for use in mines susceptible to firedamp - Part 1: General requirements - Construction and testing in relation to the risk of explosion
EN 60079-35-1:2011/AC:2011
  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60079-35-1:2011(Main)
Caplights for use in mines susceptible to firedamp - Part 1: General requirements - Construction and testing in relation to the risk of explosion (IEC 60079-35-1:2011)
EN 60079-35-1:2011

This part of IEC 60079-35 specifies requirements for the construction, testing and marking of caplights, including caplights with a point of connection for other equipment, for use in mines susceptible to firedamp (Group I - electrical equipment for explosive gas atmospheres as defined in IEC 60079-0). It deals only with the risk of the caplight becoming a source of ignition. The requirements for performance are in IEC 60079-35-2.1 This standard supplements and modifies the general requirements of IEC 60079-0 except as indicated in Table 1. Where a requirement of this standard conflicts with a requirement of IEC 60079-0, the requirements of this standard take precedence. Compliance with this standard will provide an EPL of Mb (see 4.1 of this standard). If an EPL of Ma is required, the caplight will need to conform to the requirements of 4.2 of this standard, which in turn refers to IEC 60079-11. It is expected that from time to time, caplights conforming to this standard (EPL Mb) will operate in atmospheres where the firedamp exceeds statutory levels that require the withdrawal of people from the high firedamp atmosphere to a non-hazardous area. In designing equipment for operation in conditions other than those given above, this standard may be used as guidance; however, additional testing may be required. Where a caplight is assessed as intrinsically safe equipment, Ex ia, conforming to IEC 60079- 11 only the clauses/subclauses listed in 4.2 require application.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 12349:2023(Main)
Mechanical vibration - Guide to the health effects of vibration on the human body
CEN/TR 12349:2023

The aim of this CEN report is to provide information on the possible adverse health effects caused by exposure to vibration at work.  the report addresses manufacturers as well as employers and employees using vibrating machinery in order to improve their understanding of the possible health problems arising from occupational exposure to vibration.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80004-1:2023(Main)
Nanotechnologies - Vocabulary - Part 1: Core vocabulary (ISO 80004-1:2023)
EN ISO 80004-1:2023

This document defines core terms in the field of nanotechnology. This document is intended to facilitate communication between organizations and individuals in industry and those who interact with them.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-22:2023(Main)
Extenders - Specifications and methods of test - Part 22: Flux-calcined kieselguhr (ISO 3262-22:2023)
EN ISO 3262-22:2023

This document specifies requirements and corresponding methods of test for flux-calcined kieselguhr.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18473-4:2023(Main)
Functional pigments and extenders for special applications - Part 4: Nanoscale titanium dioxide for photocatalytic application (ISO 18473-4:2022)
EN ISO 18473-4:2023

This document specifies requirements and corresponding test methods for nanoscale titanium dioxide (TiO2) in either powder or suspension form for photocatalytic application.
This document is applicable to modified nanoscale titanium dioxide for photocatalytic application. Such modification can be surface treatment, coating, doping and combination thereof.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day