SIST EN 846-11:2001

SIST EN 846-11:2001 is a Slovenian standard identical to EN 846-11:2000 from SIST. It gives a test method for determining the dimensions and the straightness or bow of lintels used as ancillary components for masonry. In practice, it is the reference for measuring lintel geometry in a repeatable way so manufacturers, laboratories, and buyers can compare results against the same method.

What does SIST EN 846-11:2001 specify?

SIST EN 846-11:2001 specifies methods for determining the dimensions and straightness or bow of lintels. It applies to single span, single, combined, and prefabricated components of composite lintels, and it links those products to prEN 845-2:1992.

The standard belongs to the series Methods of test for ancillary components for masonry and is Part 11 of that series. For a reader, that means the document is about one specific geometry check, not a general masonry design rule or a strength test.

What are the key requirements of SIST EN 846-11:2001?

SIST EN 846-11:2001 focuses on measuring two things: the dimensions of lintels and their straightness or bow. The practical purpose is to give one agreed way to verify whether a lintel matches the required geometry.

The main points are:

• Measure dimensions. The standard provides the method for checking the lintel’s size. This matters because dimensional accuracy affects fit, installation, and consistency in production.
• Check straightness or bow. The standard covers the geometric deviation of the lintel from straightness. This matters because bow can affect alignment, support, and how easily the lintel can be built into masonry.
• Apply the method to several lintel forms. The scope includes single span, single, combined, and prefabricated components of composite lintels. This matters because the same measurement approach can be used across the product types named in the standard.
• Use it for ancillary components for masonry. The document is part of the testing framework for masonry accessories rather than a general-purpose structural standard. In practice, it helps with incoming inspection, factory control, and product verification.
• Relate results to prEN 845-2:1992. The scope ties the tested lintels to that product standard. This matters because the geometry test is intended for lintels covered by that product family.
• Focus on geometry, not other performance properties. The subject of the standard is dimensions and bow only. For a buyer or quality manager, that means this document answers whether the lintel is straight and within size, not how it behaves under load.
• Support repeatable comparison. Because the standard defines a test method, different people and laboratories can use the same approach. That makes results easier to compare across suppliers and test reports.

What terms does SIST EN 846-11:2001 define?

The standard centers on a few core terms used in lintel testing.

• Lintels - structural members over openings in masonry, such as above doors or windows.
• Single span - a lintel arrangement spanning one opening in one piece.
• Single - a single lintel element rather than an assembly of parts.
• Combined - a lintel formed from combined parts or components.
• Composite lintels - lintels made up of more than one component working together.
• Prefabricated component - a component made in advance in factory conditions before installation.
• Straightness or bow - the geometric departure of a lintel from a straight line, which is the feature the standard asks you to measure.

Who uses SIST EN 846-11:2001?

SIST EN 846-11:2001 is used by manufacturers of masonry lintels, test laboratories, quality control staff, and buyers who need to specify or verify lintel geometry. It is also relevant to engineers and technical specifiers working with masonry ancillary components.

In practice, these users rely on the standard when they need to check incoming goods, document conformity, compare products from different suppliers, or write test reports for lintels intended for masonry construction.

Which standards are used with SIST EN 846-11:2001?

The standard refers to prEN 845-2:1992, which identifies the lintel products the test method applies to. In use, that companion standard provides the product context, while SIST EN 846-11:2001 provides the method for checking dimensions and bow.

What does the SIST EN 846-11:2001 document contain?

The document contains the Slovenian, English, German, and French titles for Part 11 of the test-method series, the scope statement, and the identification that it is identical to EN 846-11:2000. It also shows the masonry classification ICS 91.080.30.

As a result, the document is a focused geometry test standard for lintels. It is intended for the measurement task itself, so readers can use it as the basis for inspection, testing, and product verification of masonry ancillary components.