oSIST prEN 14846:2015
(Main)Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods
Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods
This European Standard specifies requirements and test methods for strength, security, durability and function of electrical and electronic components for all types of electromechanically operated locks and striking plates used on doors, window doors and entrance doors in buildings.
Requirements relating to the purely mechanical feature of products included in this European Standard (e.g. resistance to drilling/side load) are covered by EN 12209.
This European Standard covers electromechanically operated locks and striking plates which are either manufactured and placed on the market in their entirety by one producer or assembled from sub-assemblies produced by more than one producer and designed to be used in combination.
This document is not applicable to electrically powered hold-open devices (EN 1155), electrically controlled panic exit systems (prEN 13633) or electrically controlled emergency exit systems (prEN 13637). It does not apply to purely magnetic locks, mechatronic or mechanical cylinders (EN 1303), handles (EN 1906), locks for windows, padlocks (EN 12320), locks for safes (EN 1300), furniture locks or prison locks, nor does it apply to cover operating and identification devices (such as mechanical cylinders, intelligent cards, digit codes, magnetic cards).
This European Standard does not, for the time being, apply to electromagnetic door locks but these devices will be considered for inclusion in the first revision of this European Standard.
Schlösser und Baubeschläge - Schlösser - Elektromechanische Schlösser und Schließbleche - Anforderungen und Prüfverfahren
Quincaillerie pour le bâtiment - Serrures et becs de cane - Serrures et gâches électromécaniques - Prescriptions et méthodes d'essai
Stavbno okovje - Ključavnice in zapahi - Elektromehanske ključavnice in zaporne plošče - Zahteve in preskusne metode
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 14846:2015
01-september-2015
6WDYEQRRNRYMH.OMXþDYQLFHLQ]DSDKL(OHNWURPHKDQVNHNOMXþDYQLFHLQ]DSRUQH
SORãþH=DKWHYHLQSUHVNXVQHPHWRGH
Building hardware - Locks and latches - Electromechanically operated locks and striking
plates - Requirements and test methods
Schlösser und Baubeschläge - Schlösser - Elektromechanische Schlösser und
Schließbleche - Anforderungen und Prüfverfahren
Quincaillerie pour le bâtiment - Serrures et becs de cane - Serrures et gâches
électromécaniques - Prescriptions et méthodes d'essai
Ta slovenski standard je istoveten z: prEN 14846
ICS:
91.190 Stavbna oprema Building accessories
oSIST prEN 14846:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 14846:2015
---------------------- Page: 2 ----------------------
oSIST prEN 14846:2015
EUROPEAN STANDARD
DRAFT
prEN 14846
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2015
ICS 91.190 Will supersede EN 14846:2008
English Version
Building hardware - Locks and latches - Electromechanically
operated locks and striking plates - Requirements and test
methods
Quincaillerie pour le bâtiment - Serrures et becs de cane - Schlösser und Baubeschläge - Schlösser -
Serrures et gâches électromécaniques - Prescriptions et Elektromechanische Schlösser und Schließbleche -
méthodes d'essai Anforderungen und Prüfverfahren
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 33.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14846:2015 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 14846:2015
prEN 14846:2015 (E)
Contents Page
Foreword . 6
1 Scope. 9
2 Normative references . 9
3 Terms and definitions . 10
4 Requirements . 11
4.1 General . 11
4.1.1 Essential characteristic for electromechanically operated locks . 11
4.1.2 Essential characteristic for electromechanically operated striking plates . 11
4.1.3 Dangerous substances. 12
4.1.4 Return force of latch bolt . 12
4.1.5 Requirements for product information .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.