iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 11542-2:2000/AC:2009

(Corrigendum)

Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998/Cor 1:2007)

Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998/Cor 1:2007)

TC - Technical modification in Subclause A.6 in the E and F versions.
DIN - Ensuing modification in Subclause A.6 in the D version.

Kunststoffe - Ultrahochmolekulares Polyethylen (PE-UHMW)- Formmassen - Teil 2: Herstellung von Probekörpern und Bestimmung von Eigenschaften (ISO 11542-2:1998/Cor 1:2007)

Plastiques - Matériaux à base de polyéthylène à très haute masse moléculaire (PE-UHMW) pour moulage et extrusion - Partie 2: Préparation des éprouvettes et détermination des propriétés (ISO 11542-2:1998/Cor 1:2007)

Polimerni materiali - Materiali za oblikovanje in ekstrudiranje na osnovi polietilena z ultra visoko molsko maso polietilena (PE UHMW) - 2. del: Priprava preskušancev in določanje lastnosti (ISO 11542-2:1998/Cor 1:2007)

General Information

Status
Withdrawn
Publication Date
11-Feb-2009
Withdrawal Date
27-Jan-2021
ICS
83.080.20 - Thermoplastic materials
Technical Committee
IPMA - Polimer materials and products
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
28-Jan-2021
Due Date
20-Feb-2021
Completion Date
28-Jan-2021
Ref Project
EN ISO 11542-2:1998/AC:2008 - Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998/Cor 1:2007)

Relations

Corrects
SIST EN ISO 11542-2:2000 - Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998)
Effective Date
01-Apr-2009
Replaced By
SIST EN ISO 21304-2:2021 - Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021)
Effective Date
27-Jan-2021
Replaced By
SIST EN ISO 21304-2:2021 - Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021)
Effective Date
08-Jun-2022
Revised
SIST EN ISO 21304-2:2021 - Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021)
Effective Date
23-Jan-2019
Corrects
SIST EN ISO 11542-2:2000 - Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998)
Effective Date
08-Jun-2022

Buy Standard

EN ISO 11542-2:2000/AC:2009EN ISO 11542-2:2000/AC:2009
PreviousNext
Corrigendum
EN ISO 11542-2:2000/AC:2009
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kunststoffe - Ultrahochmolekulares Polyethylen (PE-UHMW)- Formmassen - Teil 2: Herstellung von Probekörpern und Bestimmung von Eigenschaften (ISO 11542-2:1998/Cor 1:2007)Plastiques - Matériaux à base de polyéthylène à très haute masse moléculaire (PE-UHMW) pour moulage et extrusion - Partie 2: Préparation des éprouvettes et détermination des propriétés (ISO 11542-2:1998/Cor 1:2007)Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998/Cor 1:2007)83.080.20PlastomeriThermoplastic materialsICS:Ta slovenski standard je istoveten z:EN ISO 11542-2:1998/AC:2008SIST EN ISO 11542-2:2000/AC:2009en,fr,de01-april-2009SIST EN ISO 11542-2:2000/AC:2009SLOVENSKI
STANDARD



SIST EN ISO 11542-2:2000/AC:2009



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 11542-2:1998/AC
October 2008
Octobre 2008
Oktober 2008 ICS 83.080.20 English version Version Française Deutsche Fassung
Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998/Cor 1:2007)
Plastiques - Matériaux à base de polyéthylène à très haute masse moléculaire (PE-UHMW) pour moulage et extrusion - Partie 2: Préparation des éprouvettes et détermination des propriétés (ISO 11542-2:1998/Cor 1:2007)
Kunststoffe - Ultrahochmolekulares Polyethylen (PE-UHMW)- Formmassen - Teil 2: Herstellung von Probekörpern und Bestimmung von Eigenschaften (ISO 11542-2:1998/Cor 1:2007) This corrigendum becomes effective on 22 October 2008 for incorporation in the three official language versions of the EN.
Ce corrigendum prendra effet le 22 octobre 2008 pour incorporation dans les trois versions linguistiques officielles de la EN.
Die Berichtigung tritt am 22.Oktober 2008 zur Einarbeitung in die drei offiziellen Sprachfassungen der EN in Kraft.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 293:2023(Main)
Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023)
EN ISO 293:2023

ISO 293:2004 specifies the general principles and the procedures to be followed with thermoplastics in the preparation of compression-moulded test specimens, and sheets from which test specimens may be machined or stamped.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO 4574:2023(Main)
Plastics - PVC resins for general use - Determination of hot plasticizer absorption
ISO 4574:2019

This document specifies a method for determining the hot plasticizer absorption of PVC polymers intended for general use (designated "G" in ISO 1060-1) by hot mixing in a planetary mixer and measuring the amount of plasticizer absorbed.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    10 pages
    English language
    sale 15% off
SIST
SIST ISO 1110:2023(Main)
Plastics - Polyamides - Accelerated conditioning of test specimens
ISO 1110:2019

This document describes a method for the accelerated conditioning of test specimens of polyamides and copolyamides. It is applicable to grades containing fillers and other additives, but not grades containing more than a mass fraction of 2 % extractables.
The equilibrium moisture content attained by this method is close to the equilibrium moisture content obtained in standard atmosphere 23 °C/50 %RH. The values of mechanical properties obtained after accelerated conditioning in accordance with this method can differ slightly from those obtained after conditioning in standard atmosphere 23 °C/50 %RH.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
SIST
SIST EN ISO 11337:2023(Main)
Plastics - Polyamides - Determination of ε-caprolactam and ω-laurolactam by gas chromatography (ISO 11337:2023)
EN ISO 11337:2023

ISO 11337:2010 specifies a method for determining epsilon‑caprolactam and omega‑laurolactam in polyamides by gas chromatography. It is suitable particularly for the determination of epsilon‑caprolactam in polyamide 6 and omega‑laurolactam in polyamide 12. Bearing in mind that gas chromatography offers a wide range of possible conditions, the method specified is that shown to have been suitable in practice.
Two variants of the basic method are specified:
Method A is an extraction method with boiling methanol, and the extract is injected into a gas chromatograph.
Method B is a method using a solvent, and the solution is injected into a gas chromatograph.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 6401:2023(Main)
Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer using gas-chromatographic method (ISO 6401:2022)
EN ISO 6401:2022

ISO 6401:2008 specifies a method for the determination of vinyl chloride monomer in homopolymer and copolymer resins of vinyl chloride and compounded materials. The method is based on sample dissolution and headspace gas chromatography. Concentrations of vinyl chloride in the range 0,1 mg/kg to 3,0 mg/kg can be determined.
A "dry method", suitable for PVC resins but not compounded materials, is widely used within the industry for in-house determinations. A separate International Standard based on this methodology is under development.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 306:2023(Main)
Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2022)
EN ISO 306:2022

This document specifies four methods for the determination of the Vicat softening temperature (VST) of thermoplastic materials:
—    Method A50 using a force of 10 N and a heating rate of 50 °C/h;
—    Method B50 using a force of 50 N and a heating rate of 50 °C/h;
—    Method A120 using a force of 10 N and a heating rate of 120 °C/h;
—    Method B120 using a force of 50 N and a heating rate of 120 °C/h.
The methods specified are applicable only to thermoplastics, for which they give a measure of the temperature at which the thermoplastics start to soften rapidly.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16396-1:2022(Main)
Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 16396-1:2022)
EN ISO 16396-1:2022

This document establishes a system of designation for polyamide (PA) moulding and extrusion
materials, which can be used as the basis for specifications.
The types of polyamide plastics are differentiated from each other by a classification system based on
appropriate levels of the designatory properties
a) viscosity number,
b) tensile modulus, and
c) nucleating additive,
and on information about composition, intended application and/or method of processing, important
properties, additives, colorants, fillers, and reinforcing materials.
The designation system is applicable to all polyamide homopolymers, copolymers, and blends.
It is applicable to unmodified materials ready for normal use and materials modified, for example, by
colorants, additives, fillers, reinforcing materials, and polymer modifiers.
This document does not apply to the following materials:
— monomer casting-type polyamides of PA 6;
— monomer casting-type polyamides of PA 12.
It is not intended to imply that materials having the same designation give the same performance.
This document does not provide engineering data, performance data, or data on processing conditions
which can be required to specify a material. If such additional properties are required, they can be
determined according to the test methods specified in ISO 16396-2, if suitable.
In order to specify a thermoplastic material for a particular application, additional requirements can be
given in data block 5 (see 4.1).

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16396-2:2022(Main)
Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2022)
EN ISO 16396-2:2022

This document specifies the methods of preparation of test specimens and the test methods to be
used in determining the properties of polyamide moulding and extrusion materials. It gives the
requirements for handling test material and for conditioning both the test material before moulding
and the specimens before testing.
This document specifies procedures and conditions for the preparation of test specimens and
procedures for measuring properties of the materials from which these specimens are made are given.
It lists the properties and test methods that are suitable and necessary to characterize polyamide
moulding and extrusion materials.
The properties have been selected from the general test methods in ISO 10350-1. Other test methods in
wide use for, or of particular significance to, these moulding and extrusion materials are also included
in this document, as are the designatory properties viscosity number and tensile modulus given in
ISO 16396-1.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 1133-1:2022(Main)
Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2022)
EN ISO 1133-1:2022

This document specifies two procedures for the determination of the melt mass-flow rate (MFR) and
the melt volume-flow rate (MVR) of thermoplastic materials under specified conditions of temperature
and load. Procedure A is a mass-measurement method. Procedure B is a displacement-measurement
method. Normally, the test conditions for measurement of melt flow rate are specified in the material
standard with a reference to this document. The test conditions normally used for thermoplastics are
listed in Annex A.
The MVR is particularly useful when comparing materials of different filler content and when
comparing filled with unfilled thermoplastics. The MFR can be determined from MVR measurements,
or vice versa, provided the melt density at the test temperature is known.
This document is also possibly applicable to thermoplastics for which the rheological behaviour is
affected during the measurement by phenomena such as hydrolysis (chain scission), condensation and
cross-linking, but only if the effect is limited in extent and only if the repeatability and reproducibility
are within an acceptable range. For materials which show significantly affected rheological behaviour
during testing, this document is not appropriate. In such cases, ISO 1133-2 applies.
NOTE The rates of shear in these methods are much smaller than those used under normal conditions of
processing, and therefore it is possible that data obtained by these methods for various thermoplastics will not
always correlate with their behaviour during processing. Both methods are used primarily in quality control.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18064:2022(Main)
Thermoplastic elastomers - Nomenclature and abbreviated terms (ISO 18064:2022)
EN ISO 18064:2022

This document establishes a nomenclature system for thermoplastic elastomers based on the chemical
composition of the polymer or polymers involved. It specifies symbols and abbreviated terms used to
identify thermoplastic elastomers in industry, commerce, and government. It is not intended to conflict
with, but to supplement, existing trade names and trademarks.
NOTE 1 The name of the thermoplastic elastomer is intended to be used in technical papers and presentations
followed by the abbreviated term used to designate the elastomer in this document.
NOTE 2 Annex A gives thermoplastic-elastomer abbreviated terms that have been used in the past in materials
standards, technical bulletins, textbooks, patents, and trade literature.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day