iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 14067-6:2018/kFprA1:2022

(Amendment)

Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment

Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment

This document gives guidelines for the cross wind assessment of railways.
This document is applicable to all passenger vehicles, locomotives and power cars (with a maximum train speed above 140 km/h up to 360 km/h) and freight wagons (with a maximum train speed above 80 km/h up to 160 km/h) and track gauges from 1 435 mm to 1 668 mm inclusive. For passenger vehicles, locomotives and power cars with a maximum train speed between 250 km/h and 360 km/h, a requirement to demonstrate the cross wind stability is imposed. This document is not applicable to light rail and urban rail vehicles.

Bahnanwendungen - Aerodynamik - Teil 6: Anforderungen und Prüfverfahren zur Bewertung von Seitenwind

Applications ferroviaires - Aérodynamique - Partie 6 : Exigences et procédures d'essai pour l'évaluation de la stabilité vis-à-vis des vents traversiers

Železniške naprave - Aerodinamika - 6. del: Zahteve in preskusni postopki za oceno vpliva bočnega vetra - Dopolnilo A1

General Information

Status
Not Published
Public Enquiry End Date
31-Oct-2020
ICS
45.060.01 - Railway rolling stock in general
Technical Committee
IŽNP - Reilway applications
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
23-Jun-2022
Due Date
28-Jun-2022
Completion Date
23-Jun-2022
Directive
2016/797/EU - Directive (EU) 2016/797 of the European Parliament and of the Council of 11 May 2016 on the interoperability of the rail system within the European Union (Text with EEA relevance)
Mandate
M/483 - Mandate for programming and standardisation addressed to the European standardisation bodies under directive 2008/57/EC in the field of the interoperability of the rail system within the European Union
Ref Project
EN 14067-6:2018/FprA1 - Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment

Relations

Consolidated By
SIST EN 14067-6:2018+A1:2022 - Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment
Effective Date
18-Jan-2023
Consolidated By
SIST EN 14067-6:2018+A1:2022 - Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment
Effective Date
19-Jan-2023
Amends
SIST EN 14067-6:2018 - Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment
Effective Date
11-May-2020
Consolidated By
SIST EN 14067-6:2018+A1:2022 - Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment
Effective Date
18-May-2022

Buy Standard

EN 14067-6:2018/oprA1:2020EN 14067-6:2018/oprA1:2020
PreviousNext
Draft
EN 14067-6:2018/oprA1:2020
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14067-6:2018/oprA1:2020
01-oktober-2020
Železniške naprave - Aerodinamika - 6. del: Zahteve in preskusni postopki za
oceno vpliva bočnega vetra - Dopolnilo A1
Railway applications - Aerodynamics - Part 6: Requirements and test procedures for
cross wind assessment
Bahnanwendungen - Aerodynamik - Teil 6: Anforderungen und Prüfverfahren zur
Bewertung von Seitenwind
Applications ferroviaires - Aérodynamique - Partie 6 : Exigences et procédures d'essai
pour l'évaluation de la stabilité vis-à-vis des vents traversiers
Ta slovenski standard je istoveten z: EN 14067-6:2018/prA1:2020
ICS:
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
SIST EN 14067-6:2018/oprA1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 14067-6:2018/oprA1:2020

---------------------- Page: 2 ----------------------
SIST EN 14067-6:2018/oprA1:2020


DRAFT
EUROPEAN STANDARD
EN 14067-6:2018
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
August 2020
ICS 45.060.01
English Version

Railway applications - Aerodynamics - Part 6:
Requirements and test procedures for cross wind
assessment
Applications ferroviaires - Aérodynamique - Partie 6 : Bahnanwendungen - Aerodynamik - Teil 6:
Exigences et procédures d'essai pour l'évaluation de la Anforderungen und Prüfverfahren zur Bewertung von
stabilité vis-à-vis des vents traversiers Seitenwind
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 256.

This draft amendment A1, if approved, will modify the European Standard EN 14067-6:2018. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14067-6:2018/prA1:2020:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 14067-6:2018/oprA1:2020
EN 14067-6.2018/prA1:2020 (E)
Contents Page

European foreword . 3
1 Modifications to Annex H, H.3.3 Example Ve
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 15654-1:2018+A1:2023(Main + Amendment)
Railway applications - Measurement of vertical forces on wheels and wheelsets - Part 1: On-track measurement sites for vehicles in service
EN 15654-1:2018+A1:2023

The scope of this European Standard is restricted to the measurement of vertical wheel forces and calculation of derived quantities on vehicles in service. Measurements of a train in motion are used to estimate the static forces.
Derived quantities can be:
-   axle loads;
-   side to side load differences of a wheel set, bogie, vehicle;
-   overall mass of vehicle or train set;
-   mean axle load of a vehicle or train set.
This standard is not concerned with the evaluation of:
-   dynamic wheel force or derived quantities;
-   wheel condition (i.e. shape, profile, flats);
-   lateral wheel force;
-   combination of lateral and vertical wheel forces.
The standard defines accuracy classes for measurements to be made at any speed greater than 5 km/h within the calibrated range, which may be up to line speed.
The aim of this standard is to obtain measurement results that give representative values for the distribution of vertical wheel forces of a running vehicle, which under ideal conditions will be similar to those that can be obtained from a standing vehicle.
This standard does not impose any restrictions on the types of vehicles that can be monitored, or on which networks or lines the measuring system can be installed.
The standard lays down minimum technical requirements and the metrological characteristics of a system for measuring and evaluating a range of vehicle loading parameters. Also defined are accuracy classes for the parameters measured and the procedure for verifying the calibration.
The measuring system proposed in this standard should not be considered as safety critical. If the measuring system is connected to a train traffic command and control system then requirements that are not part of this standard may apply.
Measuring systems complying with this standard have the potential to enhance safety in the railway sector. However, the current operating and maintenance procedures rather than this standard are mandatory for ensuring safety levels in European rail networks.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15085-1:2023(Main)
Railway applications - Welding of railway vehicles and components - Part 1: General
EN 15085-1:2023

This document defines terms in the field of welding on railway vehicles and associated components. This document is applicable to all assemblies, sub-assemblies or parts welded by any welding process, either manual, partly mechanized, fully mechanized or automatic welding as defined in EN ISO 4063.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15355:2019+A1:2023(Main + Amendment)
Railway applications - Braking - Distributor valves and distributor-isolating devices
EN 15355:2019+A1:2023

This document applies to distributor valves and distributor-isolating devices.
The distributor valves contained in this document are of graduable release type. Direct release types are not included.
Functionally they are regarded as not containing relay valves of any type, even if the relay valves are physically an integral part of the distributor valves.
This document applies to both distributor-isolating devices mounted separate from the distributor valve and distributor-isolating devices integral with the distributor valve.
This document specifies the requirements for the design, testing and quality assurance of distributor valves and distributor-isolating devices.
The distributor valve and distributor-isolating device are intended to be part of a brake system mounted in a vehicle with maximum length of 31 m and maximum brake pipe volume of 25 l taking into consideration brake pipe inner diameters between 25 mm and 32 mm.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15085-3:2023+A1:2023(Main + Amendment)
Railway applications - Welding of railway vehicles and components - Part 3: Design requirements
EN 15085-3:2022+A1:2023

This document applies to welding of metallic materials in the manufacture and maintenance of railway vehicles and their components.
This document specifies applicable design and classification rules.
This document does not define parameters for the dimensioning.
NOTE   Requirements on structures can be found in other standards like EN 12663.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15085-4:2023(Main)
Railway applications - Welding of railway vehicles and components - Part 4: Production requirements
EN 15085-4:2023

This series of standards applies to welding of metallic materials in the manufacture and maintenance of railway vehicles and their parts.
This part of the series describes the production requirements (i.e. preparation and execution) of the welding work.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15085-5:2023(Main)
Railway applications - Welding of railway vehicles and components - Part 5: Inspection, testing and documentation
EN 15085-5:2023

This series of standards applies to welding of metallic materials in the manufacture and maintenance of railway vehicles and their parts.
This part of the series defines the classification levels as well as the requirements for manufacturers of welded railway vehicles and components.
This part of the series specifies:
- inspections and testing to be executed on the welds;
- destructive as well as non-destructive tests to be performed;
- necessary documentation to issue to declare the conformity of the products.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15437-1:2009+A1:2023(Main)
Railway applications - Axlebox condition monitoring - Interface and design requirements - Part 1: Track side equipment and rolling stock axlebox
EN 15437-1:2009+A1:2022

This part of EN 15437 defines the minimum characteristics for the interface between a trackside Hot Axlebox Detector (HABD) and Rolling Stock (RST) that comply with the European Directives for Interoperability to ensure that the minimum functional requirement of the interface is achieved.
The minimum requirements of the interface apply to:
a)   Rolling stock conforming to standard European railway gauge, that is 1 435 mm;
b)   Rolling stock axles fitted with outboard bearings;
NOTE 1   The design of rolling stock axles fitted with inboard bearings should respect the requirements set out in Note 2 of 5.2.
c)   Rolling stock with a maximum design speed lower than 250 km/h;
NOTE 2   Interoperable rolling stock with a maximum design speed higher than or equal to 250 km/h are mandated to have on-board equipment for axlebox condition monitoring. The requirements for on-board equipment are described in !EN 15437-2:2012+A1:2022.
NOTE 3   Interoperable rolling stock with a maximum design speed higher than or equal to 250 km/h are outside the scope of this Part of the standard. However, if such rolling stock are required to be monitored by HABDs their target area should comply with the requirements specified in this standard, except where stated otherwise.
d)   Trackside HABDs that are required to monitor rolling stock with a maximum design speed higher than or equal to 250 km/h.
The rolling stock requirements of the interface are described in Clause 5 and for the HABD requirements of the interface are described in Clause 6.
The scope of this part (part 1) of the standard does not include:
-   Hot Wheel (Hot Disc) Detectors (HWDs). However, HWD are often installed in combination with trackside HABD to provide a dual monitoring system. This standard does not prevent the use of such a combination;
-   how a HABD measures the temperature and identifies axle box position. This is part of an individual equipment design and not part of the functional requirements of this standard;
-   operational requirements for acting on the information reported by the HABD system;
-   maintenance requirements for HABD systems.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15437-2:2014+A1:2023(Main)
Railway applications - Axlebox condition monitoring - Interface and design requirements - Part 2: Performance and design requirements of on-board systems for temperature monitoring
EN 15437-2:2012+A1:2022

This European Standard defines the minimum performance requirements of on-board monitoring systems for axlebox condition monitoring by means of temperature measurements.
This European Standard refers to temperature monitoring of the axlebox. However, the design may be such that the rolling bearing itself is monitored directly.
The requirements of this European Standard are intended to apply equally to basic monitoring systems for monitoring the axlebox temperature through to more technically complex systems that may employ a combination of mechatronics.
To ensure the compatibility of monitoring systems and the effective monitoring functions, this European Standard defines the requirements in the following areas:
-   equipment and characteristics;
-   monitoring performance;
-   operation and interface.
This part of EN 15437 does not include:
-   systems that do not give an indication to the driver;
-   how an on-board monitoring system is structured and how it measures the temperature and identifies axlebox position. This is considered part of equipment design and not part of the functional requirements set out in this standard;
-   operational requirements for acting on the information reported by the on-board monitoring system;
-   operational requirements for conflict of information between trackside monitoring systems and on-board monitoring systems;
-   maintenance requirements for on-board temperature monitoring systems.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14067-5:2022/AC:2023(Corrigendum)
Railway applications - Aerodynamics - Part 5: Requirements and assessment procedures for aerodynamics in tunnels
EN 14067-5:2021/AC:2023
  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15085-6:2022(Main)
Railway applications - Welding of railway vehicles and components - Part 6: Maintenance welding requirements
EN 15085-6:2022

This series of standards applies to welding of metallic materials in the manufacture and maintenance of railway vehicles and their components.
This part of the series defines the classification levels as well as the requirements for manufacturers of welded railway vehicles and components.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day