SIST EN IEC 61439-1:2021/oprAA:2024
(Amendment)Low-voltage switchgear and controlgear assemblies - Part 1: General rules
Low-voltage switchgear and controlgear assemblies - Part 1: General rules
no scope available
Niederspannungs-Schaltgerätekombinationen - Teil 1: Allgemeine Festlegungen
This Amendment A11 will revise EN IEC 61439-1:2021 to meet the essential requirements of Directive 2014/30/EU relating to electromagnetic compatibility
Ensembles d'appareillage à basse tension - Partie 1: Règles générales
Au troisième alinéa, ajouter le tiret suivant:
"- les ensembles alimentés par des batteries ou des sources d'énergie renouvelable".
Sestavi nizkonapetostnih stikalnih in krmilnih naprav - 1. del: Splošna pravila - Dopolnilo AA
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 61439-1:2021/oprAA:2024
01-marec-2024
Sestavi nizkonapetostnih stikalnih in krmilnih naprav - 1. del: Splošna pravila -
Dopolnilo AA
Low-voltage switchgear and controlgear assemblies - Part 1: General rules
Niederspannungs-Schaltgerätekombinationen - Teil 1: Allgemeine Festlegungen
Ensembles d'appareillage à basse tension - Partie 1: Règles générales
Ta slovenski standard je istoveten z: EN IEC 61439-1:2021/prAA:2023
ICS:
29.130.20 Nizkonapetostne stikalne in Low voltage switchgear and
krmilne naprave controlgear
SIST EN IEC 61439-1:2021/oprAA:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 61439-1:2021/oprAA:2024
---------------------- Page: 2 ----------------------
SIST EN IEC 61439-1:2021/oprAA:2024
EUROPEAN STANDARD DRAFT
EN IEC 61439-1:2021
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAA
November 2023
ICS 29.130.20 -
English Version
Low-voltage switchgear and controlgear assemblies - Part 1:
General rules
Ensembles d'appareillage à basse tension - Partie 1: Niederspannungs-Schaltgerätekombinationen - Teil 1:
Règles générales Allgemeine Festlegungen
This draft amendment prAA, if approved, will modify the European Standard EN IEC 61439-1:2021; it is submitted to CENELEC members
for enquiry.
Deadline for CENELEC: 2024-02-16.
It has been drawn up by CLC/BTTF 170-1.
If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 75165 Ref. No. EN IEC 61439-1:2021/prAA:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 61439-1:2021/oprAA:2024
EN IEC 61439-1:2021/prAA:2023 (E)
Contents Page
1 European foreword . 3
2 1 Modification to Clause 1, “Scope” . 4
3 2 Replacement of Annex J, “Electromagnetic compatibility (EMC)” . 4
4 3 Modification to Annex ZA, “Normative references to international publications with their
5 corresponding European publications” .12
6 4 Replacement of Annex ZZ, “Relationship between this European standard and the safety
7 objectives of Directive 2014/35/EU [2014 OJ L96] aimed to be covered” .15
2
---------------------- Page: 4 ----------------------
SIST EN IEC 61439-1:2021/oprAA:2024
EN IEC 61439-1:2021/prAA:2023 (E)
8 European foreword
9 This document (EN IEC 61439-1:2021/prAA:2023) has been prepared by CLC/BTTF 170-1 “Common
10 modifications to EN IEC 61439-1:2021 and EN IEC 61439-2:2021”.
11 This document is currently submitted to the Enquiry.
12 The following dates are proposed:
• latest date by which the existence of this (doa) dor + 6 months
document has to be announced at national level
• latest date by which this document has to be (dop) dor + 12 months
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards (dow) dor + 36 months
conflicting with this documen
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.