iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 50016:2001

(Main)

Electrical apparatus for potentially explosive atmospheres - Pressurized apparatus p

Electrical apparatus for potentially explosive atmospheres - Pressurized apparatus p

This European Standard contains the specific requirements for the construction and testing of electrical apparatus with type of protection pressurization p intended for use in potentially explosive atmospheres. This European Standard supplements European Standard EN 50014, the requirements of which apply to electrical apparatus with type of protection p. This European Standard includes the requirements for the construction of the enclosure and its associated components, including if any, the inlet and outlet ducts for the protective gas, and for the safety provisions and devices necessary for the type of protection pressurization p. This European Standard specifies the requirements for pressurized enclosures with or without an internal source of release, with the exceptions given hereafter. This European Standard specifies requirement for pressurized enclosures containing an unlimited source of release of flammable gas or vapour only where the unlimited source of release is from the surface of a liquid. This European Standard does not contain requirements for pressurized rooms or analyser houses. This European Standard does not contain the requirements for pressurized enclosures where, in a containment system with limited or unlimited release there is: air with an oxygen content greater than normal, or oxygen in combination with inert gas in a proportion greater than 21%. Due to the safety factors incorporated in the type of protection the uncertainty of measurement inherent in good quality, regularly calibrated measurement equipment is considered to have no significant detrimental effect and need not be taken into account when making the measurements necessary to verify compliance of the apparatus with the requirements of this standard

Elektrische Betriebsmittel für explosionsgefährdete Bereiche - Überdruckkapselung p

Matériel électrique pour atmosphères explosibles - Surpression interne p

Electrical apparatus for potentially explosive atmospheres - Pressurized apparatus "p"

General Information

Status
Withdrawn
Publication Date
31-Jan-2001
Withdrawal Date
31-May-2004
ICS
29.260.20 - Electrical apparatus for explosive atmospheres
Technical Committee
EXP - Electrical apparatus for explosive atmospheres
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Jun-2004
Due Date
01-Jun-2004
Completion Date
01-Jun-2004
Directive
79/196/EEC - Electrical apparatus for use in explosive atmospheres using certain modes of protection
97/53/EC - Electrical apparatus for use in explosive atmospheres using certain modes of protection
Mandate
BC/CEN/CLC/92-08 - BC/CEN/CLC/92-08
Ref Project
EN 50016:1995 - Electrical apparatus for potentially explosive atmospheres - Pressurized apparatus "p"

Relations

Replaced By
SIST EN 50016:2003 - Electrical apparatus for potentially explosive atmospheres - Pressurized apparatus p
Effective Date
06-May-2014
Replaced By
SIST EN 50016:2003 - Electrical apparatus for potentially explosive atmospheres - Pressurized apparatus p
Effective Date
28-Jan-2023
Replaces
SIST EN 50016:1995 - Electrical apparatus for potentially explosive atmospheres - Pressurized apparatus p
Effective Date
06-May-2014
Replaces
SIST EN 50016:1995 - Electrical apparatus for potentially explosive atmospheres - Pressurized apparatus p
Effective Date
29-Jan-2023

Buy Standard

EN 50016:2001EN 50016:2001
PreviousNext
Standard
EN 50016:2001
English language
41 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50016:2001
01-februar-2001
1DGRPHãþD
SIST EN 50016:1995
Electrical apparatus for potentially explosive atmospheres - Pressurized apparatus
"p"
Electrical apparatus for potentially explosive atmospheres - Pressurized apparatus p
Elektrische Betriebsmittel für explosionsgefährdete Bereiche - Überdruckkapselung p
Matériel électrique pour atmosphères explosibles - Surpression interne p
Ta slovenski standard je istoveten z: EN 50016:1995
ICS:
29.260.20 (OHNWULþQLDSDUDWL]D Electrical apparatus for
HNVSOR]LYQDR]UDþMD explosive atmospheres
SIST EN 50016:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50016:2001

---------------------- Page: 2 ----------------------

SIST EN 50016:2001

---------------------- Page: 3 ----------------------

SIST EN 50016:2001

---------------------- Page: 4 ----------------------

SIST EN 50016:2001

---------------------- Page: 5 ----------------------

SIST EN 50016:2001

---------------------- Page: 6 ----------------------

SIST EN 50016:2001

---------------------- Page: 7 ----------------------

SIST EN 50016:2001

---------------------- Page: 8 ----------------------

SIST EN 50016:2001

---------------------- Page: 9 ----------------------

SIST EN 50016:2001

---------------------- Page: 10 ----------------------

SIST EN 50016:2001

---------------------- Page: 11 ----------------------

SIST EN 50016:2001

---------------------- Page: 12 ----------------------

SIST EN 50016:2001

---------------------- Page: 13 ----------------------

SIST EN 50016:2001

---------------------- Page: 14 ----------------------

SIST EN 50016:2001

---------------------- Page: 15 ----------------------

SIST EN 50016:2001

---------------------- Page: 16 ----------------------

SIST EN 50016:2001

---------------------- Page: 17 ----------------------

SIST EN 50016:2001

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 50104:2020/A1:2023(Amendment)
Electrical equipment for the detection and measurement of oxygen - Performance requirements and test methods
EN 50104:2019/A1:2023

This document specifies general requirements for design, testing and performance, and describes the test methods that apply to portable, transportable and fixed equipment for the measurement of the oxygen concentration in gas mixtures indicating up to 25 % (v/v).

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60079-25:2022/AC:2023(Corrigendum)
Explosive atmospheres - Part 25: Intrinsically safe electrical systems (IEC 60079-25:2020/COR2:2022)
EN IEC 60079-25:2022/AC:2022-12

IEC Corrected version

  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62990-1:2023/A11:2023(Amendment)
Workplace Atmospheres - Part 1: Gas detectors - Performance requirements of detectors for toxic gases
EN IEC 62990-1:2022/A11:2022

This part of IEC 62990 specifies general requirements for design, function and performance, and describes the test methods that apply to portable, transportable, and fixed equipment for the detection and concentration measurement of toxic gases and vapours in workplace atmospheres and other industrial and commercial applications. This document is applicable to continuously sensing equipment whose primary purpose is to provide an indication, alarm and/or other output function the purpose of which is to indicate the presence of a toxic gas or vapour in the atmosphere and in some cases to initiate automatic or manual protective action(s). It is applicable to equipment in which the sensor generates an electrical signal when gas is present.
This document applies to two types of equipment:
• Type HM (Health Monitoring) ‘occupational exposure’ equipment: For occupational exposure measurement, the performance requirements are focused on uncertainty of measurement of gas concentrations in the region of Occupational Exposure Limit Values (OELV). The upper limit of measurement will be defined by the manufacturer in accordance with 4.2.1.
• Type SM (Safety Monitoring) ‘general gas detection’ equipment: For general gas detection applications (e.g. safety warning, leak detection), the performance requirements are focused on alarm signalling. The upper limit of measurement will be defined by the manufacturer according to the intended use of the equipment. In general, the requirements for accuracy will be higher for Type HM equipment than for Type SM equipment. The same equipment may meet the requirements of both Type HM and Type SM. For equipment used for sensing the presence of multiple gases this document applies only to the detection of toxic gas or vapour.
This document is not applicable to equipment:
- with samplers and concentrators such as sorbents or paper tape having an irreversible indication;
- used for the measurement of gases and vapours related to the risk of explosion;
- used for the measurement of oxygen; – used only in laboratories for analysis or measurement;
- used only for process measurement purposes;
- used in the domestic environment;
- used in environmental air pollution monitoring;
- used for open-path (line of sight) area gas measurement;
- used for ventilation control in car parks or tunnels.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60079-25:2022(Main)
Explosive atmospheres - Part 25: Intrinsically safe electrical systems (IEC 60079-25:2020 + COR1:2020)
EN IEC 60079-25:2022

This part of IEC 60079 contains the specific requirements for design, construction and
assessment of intrinsically safe systems, Type of Protection “i”, intended for use, as a whole or
in part, in locations in which the use of Group I, II or III Ex Equipment is required.
NOTE 1 This standard is intended for use by the designer of the system e.g. a person who could be a manufacturer,
a specialist consultant or a member of the end-user’s staff.
This document supplements and modifies the general requirements of IEC 60079-0 and the
intrinsic safety standard IEC 60079-11. Where a requirement of this standard conflicts with a
requirement of IEC 60079-0 or IEC 60079-11, the requirement of this standard takes
precedence.
The installation requirements of Group II or Group III systems designed in accordance with this
standard are specified in IEC 60079-14.
NOTE 2 Group I installation requirements are presently not provided in IEC 60079-14. Installation requirements for
Group I are being considered.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60079-29-1:2017/A1:2022(Amendment)
Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases (IEC 60079-29-1:2016/A1:2020)
EN 60079-29-1:2016/A1:2022

NEXT ACTION: TB ACTION BY 2020-01-31 (prep doc for BT meeting - Feb2021)
BT CONSULTATION FAILED (addition of Annex ZZ) ON 2020-11-10
HAS CONSULTANT ASSESSMENT BY 2020-09-24 (PUB assessment) - Compliant assessment on 2020-09-22
2020-04-8 mah: Consultant assessment at FV missing, Annex ZZ did not go to FV.

  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60079-29-1:2017/A11:2022(Amendment)
Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases
EN 60079-29-1:2016/A11:2022

EN 60079-29-1 specifies general requirements for construction, testing and performance, and describes the test methods that apply to portable, transportable and fixed equipment for the detection and measurement of flammable gas or vapour concentrations with air. The equipment, or parts thereof, is intended for use in explosive atmospheres and in mines susceptible to firedamp.
EN 60079-29-1 is applicable to flammable gas detection equipment with a measuring range up to any volume fraction as declared by the manufacturer, and which is intended to provide an indication, alarm or other output function; the purpose of which is to indicate a potential explosion hazard and in some cases, to initiate automatic or manual protective action(s).

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST IEC 60050-426:2022(Main)
International Electrotechnical Vocabulary (IEV) - Part 426: Explosive atmospheres
IEC 60050-426:2020

IEC 60050-426:2020 gives terms specifically relevant to explosive atmospheres. This new edition reviews and complements the previous one. This terminology is consistent with the terminology developed in the other specialized parts of the IEV.
It has the status of a horizontal standard in accordance with IEC Guide 108.

  • Standard
    443 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    430 pages
    English and French language
    sale 15% off
SIST
SIST-TS CLC IEC/TS 60079-47:2021(Main)
Explosive atmospheres - Part 47: Equipment protection by 2-wire intrinsically safe Ethernet concept (2-WISE)
CLC IEC/TS 60079-47:2021

This part of IEC 60079, which is a technical specification, specifies requirements for the construction, marking, and documenting of apparatus, systems and installations for use with the 2-Wire Intrinsically Safe Ethernet concept (2-WISE). The physical layer specification for 2-wire Ethernet 10BASE-T1L is defined in IEEE 802.3cg
2-WISE is the 2-Wire Intrinsically Safe Ethernet concept for advance physical layer (APL), designed to simplify the examination process for components and cable Entity Parameters within APL segments. This is achieved by defining universal Entity Parameter limits for APL ports, according to location and type of hazardous atmosphere, and listing a concise set of rules for the segment setup.
The requirements for construction and installation of 2-WISE apparatus and systems are included in IEC 60079-11, IEC 60079-14, and IEC 60079-25, except as modified by this technical specification. Parts of a 2-WISE apparatus may be protected by any Type of Protection listed in IEC 60079-0 appropriate to the EPL for the intended use. In these circumstances, the requirements of this technical specification apply only to intrinsically safe circuits of the apparatus.

  • Technical specification
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CLC IEC/TS 60079-43:2021(Main)
Explosive atmospheres - Part 43: Equipment in adverse service conditions (IEC/TS 60079-43:2017)
CLC IEC/TS 60079-43:2021

This part of IEC 60079, which is a Technical Specification, provides guidance for equipment for use in explosive atmospheres in environments which may include ambient temperatures below –20 °С, and additional adverse conditions, including maritime applications.
The purpose of this document is to provide recommendations to be considered for the design, manufacture and use of equipment. It is intended that this document be used for equipment operating within the environmental range specified on the certificate for the equipment.

  • Technical specification
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CLC IEC/TS 60079-39:2020/AC:2021(Corrigendum)
Explosive atmospheres - Part 39: Intrinsically safe systems with electronically controlled spark duration limitation (IEC/TS 60079-39:2015/COR1:2020)
CLC IEC/TS 60079-39:2019/AC:2020-12

IEC - adopted // Corrigenda

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day