kSIST FprEN 3475-513:2024

SLOVENSKI STANDARD
oSIST prEN 3475-513:2023
01-november-2023
Aeronavtika - Električni kabli za uporabo v zračnih plovilih - Preskusne metode -
513. del: Odpornost proti deformaciji (namestitev s plastičnimi vezicami)
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 513:
Deformation resistance (installation with plastic cable ties)
Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren -
Teil 513: Verformungsbeständigkeit (Installation mit Kunststoff-Kabelbindern)
Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais -
Partie 513 : Résistance à la déformation (installation avec frettes de câblage en
plastique)
Ta slovenski standard je istoveten z: prEN 3475-513
ICS:
29.060.20 Kabli Cables
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 3475-513:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN 3475-513:2023
oSIST prEN 3475-513:2023
DRAFT
EUROPEAN STANDARD
prEN 3475-513
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2023
ICS 49.060 Will supersede EN 3475-513:2020
English Version
Aerospace series - Cables, electrical, aircraft use - Test
methods - Part 513: Deformation resistance (installation
with plastic cable ties)
Série aérospatiale - Câbles électriques à usage Luft- und Raumfahrt - Elektrische Leitungen für
aéronautique - Méthodes d'essais - Partie 513 : Luftfahrtverwendung - Prüfverfahren - Teil 513:
Résistance à la déformation (installation avec frettes Verformungsbeständigkeit (Installation mit Kunststoff-
de câblage en plastique) Kabelbindern)
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3475-513:2023 E
worldwide for CEN national Members.

oSIST prEN 3475-513:2023
prEN 3475-513:2023 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Coaxial cable — Method A . 5
4.1 Preparation of specimens . 5
4.1.1 Required parts/samples . 5
4.1.2 Initial measurement . 5
4.1.3 Preparation of samples . 5
4.2 Test method . 6
4.2.1 First test . 6
4.2.2 Second test. 6
4.3 Requirement . 6
5 Coaxial cable — Method B . 6
5.1 Preparation of specimens . 6
5.1.1 Required parts/samples . 6
5.1.2 Preparation of samples . 6
5.2 Test method . 6
5.2.1 General. 6
5.2.2 Initial measurement . 6
5.2.3 Sample conditioning . 7
5.2.4 Intermediate measurements . 7
5.2.5 Sample conditioning after tying . 7
5.2.6 Final measurements . 7
5.3 Requirement . 8
6 Quadrax cable. 8
6.1 Preparation of specimens . 8
6.1.1 Required parts/samples . 8
6.1.2 Preparation of samples . 8
6.2 Test method . 8
6.2.1 General. 8
6.2.2 Initial measurement . 8
6.2.3 Sample conditioning . 8
6.2.4 Final measurement . 8
6.3 Requirement . 9
7 Databus cable . 9
7.1 Preparation of specimens . 9
7.1.1 Required parts/samples . 9
7.1.2 Preparation of samples . 9
7.2 Test method . 10
7.2.1 General. 10
7.2.2 Initial measurement . 10
7.2.3 Sample conditioning . 10
7.2.4 Test sequence . 11
oSIST prEN 3475-513:2023
prEN 3475-513:2023 (E)
7.3 Requirement . 12
Annex A (informative) Standard evolution form . 13
Bibliography . 14
oSIST prEN 3475-513:2023
prEN 3475-513:2023 (E)
European foreword
This document (prEN 3475-513:2023) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 3475-513:2020.
The main changes with respect to the previous edition EN 3475-513:2020 are as follows:
— EN 3475-513 (P2), 02/2020 — Editorial improvements, correction of the force of the cable tie gun
+5 +5
setting in 5.2.3 (75 N instead of 115 N) and update of Figure 1.
0  0
oSIST prEN 3475-513:2023
prEN 3475-513:2023 (E)
1 Scope
This document defines the test methods to evaluate the performance of coaxial, quadrax and databus
cables after the installation of plastic cable ties.
It is expected to be used together with EN 3475-100.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 3475-805, Aerospace series — Cables, electrical, aircraft use — Test methods — Part 805:
Characteristic impedance
EN 3475-806, Aerospace series — Cables, electrical, aircraft use — Test methods — Part 806: Attenuation
EN 3475-808, Aerospace series — Cables, electrical, aircraft use — Test methods — Part 808: Cross-talk
EN 3475-812, Aerospace series — Cables, electrical, aircraft use — Test methods — Part 812: Return loss
(VSWR)
EN 4056-003, Aerospace series — Cable ties for harnesses — Part 003: Plastic cable ties — Operating
temperatures −65 C° to 105 °C and −65 °C to 150 °C — Product standard
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp/
— IEC Electropedia: available at https://www.electropedia.org/
4 Coaxial cable — Method A
4.1 Preparation of specimens
4.1.1 Required parts/samples
12 plastic cable ties, type EN 4056-003 Type 1, size code S or equivalent.
Cut 8 (eight) pieces of the test cable to a length of (2 000 ± 20) mm.
Test is to be performed on 4 (four) specimens made up of 2 (two) cable pieces.
4.1.2 Initial measurement
Measure the impedance of each specimen (on both pieces of cable) in accordance with EN 3475-805,
method B, plot the results.
4.1.3 Preparation of samples
Use 3 (three) plastic cable ties per specimen to bundle 2 (two) cable pieces.
Place the first cable tie approximately 1 000 mm from the end which was connected to the TDR (to
measure the initial impedance).
oSIST prEN 3475-513:2023
prEN 3475-513:2023 (E)
Place the second cable tie at a distance of (100 ± 5) mm to the first, the
...